ref: 9510b4cae3b95ddea506206756b725a9c5c11148
dir: /r_bsp.c/
#include "quakedef.h"
//
// current entity info
//
bool insubmodel;
entity_t *currententity;
vec3_t modelorg, base_modelorg;
// modelorg is the viewpoint reletive to
// the currently rendering entity
vec3_t r_entorigin; // the currently rendering entity in world
// coordinates
static float entity_rotation[3][3];
int r_currentbkey;
typedef struct nodereject_t nodereject_t;
struct nodereject_t {
mnode_t *node;
int clipflags;
};
static nodereject_t *node_rejects;
static int num_node_rejects, max_node_rejects = 128;
typedef enum {touchessolid, drawnode, nodrawnode} solidstate_t;
#define MAX_BMODEL_VERTS 6000
#define MAX_BMODEL_EDGES 12000
static mvertex_t bverts[MAX_BMODEL_VERTS];
static bedge_t bedges[MAX_BMODEL_EDGES];
static mvertex_t *pbverts;
static bedge_t *pbedges;
static int numbverts, numbedges;
static mvertex_t *pfrontenter, *pfrontexit;
static bool makeclippededge;
//===========================================================================
/*
================
R_EntityRotate
================
*/
void R_EntityRotate (vec3_t vec)
{
vec3_t tvec;
VectorCopy (vec, tvec);
vec[0] = DotProduct (entity_rotation[0], tvec);
vec[1] = DotProduct (entity_rotation[1], tvec);
vec[2] = DotProduct (entity_rotation[2], tvec);
}
/*
================
R_RotateBmodel
================
*/
void R_RotateBmodel (entity_t *e)
{
float angle, s, c, temp1[3][3], temp2[3][3], temp3[3][3];
// TODO: should use a look-up table
// TODO: should really be stored with the entity instead of being reconstructed
// TODO: could cache lazily, stored in the entity
// TODO: share work with R_SetUpAliasTransform
// yaw
angle = e->angles[YAW];
angle = angle * M_PI*2 / 360;
s = sinf(angle);
c = cosf(angle);
temp1[0][0] = c;
temp1[0][1] = s;
temp1[0][2] = 0;
temp1[1][0] = -s;
temp1[1][1] = c;
temp1[1][2] = 0;
temp1[2][0] = 0;
temp1[2][1] = 0;
temp1[2][2] = 1;
// pitch
angle = e->angles[PITCH];
angle = angle * M_PI*2 / 360;
s = sinf(angle);
c = cosf(angle);
temp2[0][0] = c;
temp2[0][1] = 0;
temp2[0][2] = -s;
temp2[1][0] = 0;
temp2[1][1] = 1;
temp2[1][2] = 0;
temp2[2][0] = s;
temp2[2][1] = 0;
temp2[2][2] = c;
R_ConcatRotations (temp2, temp1, temp3);
// roll
angle = e->angles[ROLL];
angle = angle * M_PI*2 / 360;
s = sinf(angle);
c = cosf(angle);
temp1[0][0] = 1;
temp1[0][1] = 0;
temp1[0][2] = 0;
temp1[1][0] = 0;
temp1[1][1] = c;
temp1[1][2] = s;
temp1[2][0] = 0;
temp1[2][1] = -s;
temp1[2][2] = c;
R_ConcatRotations (temp1, temp3, entity_rotation);
// rotate modelorg and the transformation matrix
R_EntityRotate (modelorg);
R_EntityRotate (vpn);
R_EntityRotate (vright);
R_EntityRotate (vup);
R_TransformFrustum ();
}
/*
================
R_RecursiveClipBPoly
================
*/
void R_RecursiveClipBPoly (bedge_t *pedges, mnode_t *pnode, msurface_t *psurf)
{
bedge_t *psideedges[2], *pnextedge, *ptedge;
int i, side, lastside;
float dist, frac, lastdist;
mplane_t *splitplane, tplane;
mvertex_t *pvert, *plastvert, *ptvert;
mnode_t *pn;
next:
psideedges[0] = psideedges[1] = nil;
makeclippededge = false;
// transform the BSP plane into model space
// FIXME: cache these?
splitplane = pnode->plane;
tplane.dist = splitplane->dist - DotProduct(r_entorigin, splitplane->normal);
tplane.normal[0] = DotProduct (entity_rotation[0], splitplane->normal);
tplane.normal[1] = DotProduct (entity_rotation[1], splitplane->normal);
tplane.normal[2] = DotProduct (entity_rotation[2], splitplane->normal);
// clip edges to BSP plane
for ( ; pedges ; pedges = pnextedge)
{
pnextedge = pedges->pnext;
// set the status for the last point as the previous point
// FIXME: cache this stuff somehow?
plastvert = pedges->v[0];
lastdist = DotProduct (plastvert->position, tplane.normal) -
tplane.dist;
lastside = lastdist <= 0;
pvert = pedges->v[1];
dist = DotProduct (pvert->position, tplane.normal) - tplane.dist;
side = dist <= 0;
if (side != lastside)
{
// clipped
if (numbverts >= MAX_BMODEL_VERTS)
return;
// generate the clipped vertex
frac = lastdist / (lastdist - dist);
ptvert = &pbverts[numbverts++];
ptvert->position[0] = plastvert->position[0] +
frac * (pvert->position[0] -
plastvert->position[0]);
ptvert->position[1] = plastvert->position[1] +
frac * (pvert->position[1] -
plastvert->position[1]);
ptvert->position[2] = plastvert->position[2] +
frac * (pvert->position[2] -
plastvert->position[2]);
// split into two edges, one on each side, and remember entering
// and exiting points
// FIXME: share the clip edge by having a winding direction flag?
if (numbedges >= (MAX_BMODEL_EDGES - 1))
{
Con_Printf ("Out of edges for bmodel\n");
return;
}
ptedge = &pbedges[numbedges];
ptedge->pnext = psideedges[lastside];
psideedges[lastside] = ptedge;
ptedge->v[0] = plastvert;
ptedge->v[1] = ptvert;
ptedge = &pbedges[numbedges + 1];
ptedge->pnext = psideedges[side];
psideedges[side] = ptedge;
ptedge->v[0] = ptvert;
ptedge->v[1] = pvert;
numbedges += 2;
if (side == 0)
{
// entering for front, exiting for back
pfrontenter = ptvert;
makeclippededge = true;
}
else
{
pfrontexit = ptvert;
makeclippededge = true;
}
}
else
{
// add the edge to the appropriate side
pedges->pnext = psideedges[side];
psideedges[side] = pedges;
}
}
// if anything was clipped, reconstitute and add the edges along the clip
// plane to both sides (but in opposite directions)
if (makeclippededge)
{
if (numbedges >= (MAX_BMODEL_EDGES - 2))
{
Con_Printf ("Out of edges for bmodel\n");
return;
}
ptedge = &pbedges[numbedges];
ptedge->pnext = psideedges[0];
psideedges[0] = ptedge;
ptedge->v[0] = pfrontexit;
ptedge->v[1] = pfrontenter;
ptedge = &pbedges[numbedges + 1];
ptedge->pnext = psideedges[1];
psideedges[1] = ptedge;
ptedge->v[0] = pfrontenter;
ptedge->v[1] = pfrontexit;
numbedges += 2;
}
// draw or recurse further
for (i=0 ; i<2 ; i++)
{
if (psideedges[i])
{
// draw if we've reached a non-solid leaf, done if all that's left is a
// solid leaf, and continue down the tree if it's not a leaf
pn = pnode->children[i];
// we're done with this branch if the node or leaf isn't in the PVS
if (pn->visframe == r_visframecount)
{
if (pn->contents < 0)
{
if (pn->contents != CONTENTS_SOLID)
{
r_currentbkey = ((mleaf_t *)pn)->key;
R_RenderBmodelFace (psideedges[i], psurf);
}
}
else if(i == 1){ // last, can skip the call
pedges = psideedges[i];
pnode = pnode->children[i];
goto next;
}else{
R_RecursiveClipBPoly (psideedges[i], pnode->children[i], psurf);
}
}
}
}
}
/*
================
R_DrawSolidClippedSubmodelPolygons
================
*/
void R_DrawSolidClippedSubmodelPolygons (model_t *pmodel)
{
int i, j, lindex, o;
vec_t dot;
msurface_t *psurf;
int numsurfaces;
mplane_t *pplane;
bedge_t *pbedge;
medge_t *pedge, *pedges;
if(entdrawflags(currententity) ^ r_drawflags)
return;
// FIXME: use bounding-box-based frustum clipping info?
psurf = &pmodel->surfaces[pmodel->firstmodelsurface];
numsurfaces = pmodel->nummodelsurfaces;
pedges = pmodel->edges;
for (i=0 ; i<numsurfaces ; i++, psurf++)
{
// find which side of the node we are on
pplane = psurf->plane;
dot = DotProduct (modelorg, pplane->normal) - pplane->dist;
// draw the polygon
if ((dot > 0) ^ !!(psurf->flags & SURF_PLANEBACK))
{
// FIXME: use bounding-box-based frustum clipping info?
// copy the edges to bedges, flipping if necessary so always
// clockwise winding
// FIXME: if edges and vertices get caches, these assignments must move
// outside the loop, and overflow checking must be done here
pbverts = bverts;
pbedges = bedges;
numbverts = numbedges = 0;
if (psurf->numedges > 0)
{
pbedge = &bedges[numbedges];
numbedges += psurf->numedges;
for (j=0 ; j<psurf->numedges ; j++)
{
lindex = pmodel->surfedges[psurf->firstedge+j];
if ((o = (lindex < 0)))
lindex = -lindex;
pedge = &pedges[lindex];
pbedge[j].v[0] = &r_pcurrentvertbase[pedge->v[o]];
pbedge[j].v[1] = &r_pcurrentvertbase[pedge->v[!o]];
pbedge[j].pnext = &pbedge[j+1];
}
pbedge[j-1].pnext = nil; // mark end of edges
R_RecursiveClipBPoly (pbedge, currententity->topnode, psurf);
}
else
{
fatal ("no edges in bmodel");
}
}
}
}
/*
================
R_DrawSubmodelPolygons
================
*/
void R_DrawSubmodelPolygons (model_t *pmodel, int clipflags)
{
int i;
vec_t dot;
msurface_t *psurf;
int numsurfaces;
mplane_t *pplane;
// FIXME: use bounding-box-based frustum clipping info?
if(entdrawflags(currententity) ^ r_drawflags)
return;
psurf = &pmodel->surfaces[pmodel->firstmodelsurface];
numsurfaces = pmodel->nummodelsurfaces;
for (i=0 ; i<numsurfaces ; i++, psurf++)
{
// find which side of the node we are on
pplane = psurf->plane;
dot = DotProduct (modelorg, pplane->normal) - pplane->dist;
// draw the polygon
if ((dot > 0) ^ !!(psurf->flags & SURF_PLANEBACK))
{
r_currentkey = ((mleaf_t *)currententity->topnode)->key;
// FIXME: use bounding-box-based frustum clipping info?
R_RenderFace (psurf, clipflags);
}
}
}
/*
================
R_RecursiveWorldNode
================
*/
void R_RecursiveWorldNode (mnode_t *node, int clipflags)
{
int i, c, side, *pindex, rejected;
vec3_t acceptpt, rejectpt;
mplane_t *plane;
msurface_t *surf, **mark;
mleaf_t *pleaf;
double d, dot;
again:
if (node->contents == CONTENTS_SOLID)
return; // solid
if (node->visframe != r_visframecount)
return;
// cull the clipping planes if not trivial accept
// FIXME: the compiler is doing a lousy job of optimizing here; it could be
// twice as fast in ASM
if (clipflags)
{
for (i=0 ; i<4 ; i++)
{
if (! (clipflags & (1<<i)) )
continue; // don't need to clip against it
// generate accept and reject points
// FIXME: do with fast look-ups or integer tests based on the sign bit
// of the floating point values
pindex = pfrustum_indexes[i];
rejectpt[0] = node->minmaxs[pindex[0]];
rejectpt[1] = node->minmaxs[pindex[1]];
rejectpt[2] = node->minmaxs[pindex[2]];
d = DotProduct (rejectpt, view_clipplanes[i].normal);
d -= view_clipplanes[i].dist;
if (d <= 0)
return;
acceptpt[0] = node->minmaxs[pindex[3+0]];
acceptpt[1] = node->minmaxs[pindex[3+1]];
acceptpt[2] = node->minmaxs[pindex[3+2]];
d = DotProduct (acceptpt, view_clipplanes[i].normal);
d -= view_clipplanes[i].dist;
if (d >= 0)
clipflags &= ~(1<<i); // node is entirely on screen
}
}
// if a leaf node, draw stuff
if (node->contents < 0)
{
pleaf = (mleaf_t *)node;
mark = pleaf->firstmarksurface;
c = pleaf->nummarksurfaces;
if (c && mark)
{
do
{
(*mark)->visframe = r_framecount;
mark++;
} while (--c);
}
// deal with model fragments in this leaf
if (pleaf->efrags)
{
R_StoreEfrags (&pleaf->efrags);
}
pleaf->key = r_currentkey;
r_currentkey++; // all bmodels in a leaf share the same key
}
else
{
// node is just a decision point, so go down the apropriate sides
// find which side of the node we are on
plane = node->plane;
dot = plane->type <= PLANE_Z ? modelorg[plane->type] : DotProduct(modelorg, plane->normal);
dot -= plane->dist;
side = dot < 0;
// recurse down the children, front side first
R_RecursiveWorldNode (node->children[side], clipflags);
// draw stuff
c = node->numsurfaces;
if(c){
surf = cl.worldmodel->surfaces + node->firstsurface;
rejected = 0;
if(dot < -BACKFACE_EPSILON){
do{
if((surf->flags & SURF_PLANEBACK) && surf->visframe == r_framecount)
rejected |= !R_RenderFace(surf, clipflags);
surf++;
}while(--c);
}else if(dot > BACKFACE_EPSILON){
do{
if(!(surf->flags & SURF_PLANEBACK) && surf->visframe == r_framecount)
rejected |= !R_RenderFace(surf, clipflags);
surf++;
}while(--c);
}
if(rejected){
if(node_rejects == nil || num_node_rejects >= max_node_rejects){
max_node_rejects *= 2;
node_rejects = realloc(node_rejects, sizeof(*node_rejects)*max_node_rejects);
}
node_rejects[num_node_rejects].node = node;
node_rejects[num_node_rejects++].clipflags = clipflags;
}
// all surfaces on the same node share the same sequence number
r_currentkey++;
}
// recurse down the back side
node = node->children[!side];
goto again;
}
}
/*
================
R_RenderWorld
================
*/
void R_RenderWorld (void)
{
model_t *clmodel;
currententity = &cl_entities[0];
VectorCopy (r_origin, modelorg);
clmodel = currententity->model;
r_pcurrentvertbase = clmodel->vertexes;
num_node_rejects = 0;
R_RecursiveWorldNode (clmodel->nodes, 15);
}
void
R_RenderBlendedBrushes(void)
{
model_t *clmodel;
nodereject_t *rej;
msurface_t *surf;
unsigned i;
currententity = &cl_entities[0];
VectorCopy (r_origin, modelorg);
clmodel = currententity->model;
r_pcurrentvertbase = clmodel->vertexes;
if(num_node_rejects < 1)
return;
/* back to front, no clipping */
/* FIXME(sigrid): this could still be clipped against solid world */
/* FIXME(sigrid): needs to be drawn sorted with non-brush entities */
for(rej = node_rejects+num_node_rejects-1; rej >= node_rejects; rej--){
surf = cl.worldmodel->surfaces + rej->node->firstsurface;
R_BeginEdgeFrame();
for(i = 0; i < rej->node->numsurfaces; i++, surf++)
R_RenderFace(surf, rej->clipflags);
R_ScanEdges();
}
}