ref: d94ed205c08bddb5af0b67c09bcb07ca1c27592a
dir: /celt/arm/celt_pitch_xcorr_arm.s/
; Copyright (c) 2007-2008 CSIRO
; Copyright (c) 2007-2009 Xiph.Org Foundation
; Copyright (c) 2013 Parrot
; Written by Aurélien Zanelli
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions
; are met:
;
; - Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
;
; - Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in the
; documentation and/or other materials provided with the distribution.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
; ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
; OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
; EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
; PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
; LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
; NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
AREA |.text|, CODE, READONLY
GET celt/arm/armopts.s
IF OPUS_ARM_MAY_HAVE_EDSP
EXPORT celt_pitch_xcorr_edsp
ENDIF
IF OPUS_ARM_MAY_HAVE_NEON
EXPORT celt_pitch_xcorr_neon
ENDIF
IF OPUS_ARM_MAY_HAVE_NEON
;; Compute sum[k]=sum(x[j]*y[j+k],j=0...len-1), k=0...3
;xcorr_kernel_neon PROC
; ; input:
; ; r3 = int len
; ; r4 = opus_val16 *x
; ; r5 = opus_val16 *y
; ; q0 = opus_val32 sum[4]
; ; output:
; ; q0 = opus_val32 sum[4]
; ; preserved: r0-r3, r6-r11, d2, q4-q7, q9-q15
; ; internal usage:
; ; r12 = int j
; ; d3 = y_3|y_2|y_1|y_0
; ; q2 = y_B|y_A|y_9|y_8|y_7|y_6|y_5|y_4
; ; q3 = x_7|x_6|x_5|x_4|x_3|x_2|x_1|x_0
; ; q8 = scratch
; ;
; ; Load y[0...3]
; ; This requires len>0 to always be valid (which we assert in the C code).
; VLD1.16 {d5}, [r5]!
; SUBS r12, r3, #8
; BLE xcorr_kernel_neon_process4
;; Process 8 samples at a time.
;; This loop loads one y value more than we actually need. Therefore we have to
;; stop as soon as there are 8 or fewer samples left (instead of 7), to avoid
;; reading past the end of the array.
;xcorr_kernel_neon_process8
; ; This loop has 19 total instructions (10 cycles to issue, minimum), with
; ; - 2 cycles of ARM insrtuctions,
; ; - 10 cycles of load/store/byte permute instructions, and
; ; - 9 cycles of data processing instructions.
; ; On a Cortex A8, we dual-issue the maximum amount (9 cycles) between the
; ; latter two categories, meaning the whole loop should run in 10 cycles per
; ; iteration, barring cache misses.
; ;
; ; Load x[0...7]
; VLD1.16 {d6, d7}, [r4]!
; ; Unlike VMOV, VAND is a data processsing instruction (and doesn't get
; ; assembled to VMOV, like VORR would), so it dual-issues with the prior VLD1.
; VAND d3, d5, d5
; SUBS r12, r12, #8
; ; Load y[4...11]
; VLD1.16 {d4, d5}, [r5]!
; VMLAL.S16 q0, d3, d6[0]
; VEXT.16 d16, d3, d4, #1
; VMLAL.S16 q0, d4, d7[0]
; VEXT.16 d17, d4, d5, #1
; VMLAL.S16 q0, d16, d6[1]
; VEXT.16 d16, d3, d4, #2
; VMLAL.S16 q0, d17, d7[1]
; VEXT.16 d17, d4, d5, #2
; VMLAL.S16 q0, d16, d6[2]
; VEXT.16 d16, d3, d4, #3
; VMLAL.S16 q0, d17, d7[2]
; VEXT.16 d17, d4, d5, #3
; VMLAL.S16 q0, d16, d6[3]
; VMLAL.S16 q0, d17, d7[3]
; BGT xcorr_kernel_neon_process8
;; Process 4 samples here if we have > 4 left (still reading one extra y value).
;xcorr_kernel_neon_process4
; ADDS r12, r12, #4
; BLE xcorr_kernel_neon_process2
; ; Load x[0...3]
; VLD1.16 d6, [r4]!
; ; Use VAND since it's a data processing instruction again.
; VAND d4, d5, d5
; SUB r12, r12, #4
; ; Load y[4...7]
; VLD1.16 d5, [r5]!
; VMLAL.S16 q0, d4, d6[0]
; VEXT.16 d16, d4, d5, #1
; VMLAL.S16 q0, d16, d6[1]
; VEXT.16 d16, d4, d5, #2
; VMLAL.S16 q0, d16, d6[2]
; VEXT.16 d16, d4, d5, #3
; VMLAL.S16 q0, d16, d6[3]
;; Process 2 samples here if we have > 2 left (still reading one extra y value).
;xcorr_kernel_neon_process2
; ADDS r12, r12, #2
; BLE xcorr_kernel_neon_process1
; ; Load x[0...1]
; VLD2.16 {d6[],d7[]}, [r4]!
; ; Use VAND since it's a data processing instruction again.
; VAND d4, d5, d5
; SUB r12, r12, #2
; ; Load y[4...5]
; VLD1.32 {d5[]}, [r5]!
; VMLAL.S16 q0, d4, d6
; VEXT.16 d16, d4, d5, #1
; ; Replace bottom copy of {y5,y4} in d5 with {y3,y2} from d4, using VSRI
; ; instead of VEXT, since it's a data-processing instruction.
; VSRI.64 d5, d4, #32
; VMLAL.S16 q0, d16, d7
;; Process 1 sample using the extra y value we loaded above.
;xcorr_kernel_neon_process1
; ; Load next *x
; VLD1.16 {d6[]}, [r4]!
; ADDS r12, r12, #1
; ; y[0...3] are left in d5 from prior iteration(s) (if any)
; VMLAL.S16 q0, d5, d6
; MOVLE pc, lr
;; Now process 1 last sample, not reading ahead.
; ; Load last *y
; VLD1.16 {d4[]}, [r5]!
; VSRI.64 d4, d5, #16
; ; Load last *x
; VLD1.16 {d6[]}, [r4]!
; VMLAL.S16 q0, d4, d6
; MOV pc, lr
; ENDP
;; opus_val32 celt_pitch_xcorr_neon(opus_val16 *_x, opus_val16 *_y,
;; opus_val32 *xcorr, int len, int max_pitch)
;celt_pitch_xcorr_neon PROC
; ; input:
; ; r0 = opus_val16 *_x
; ; r1 = opus_val16 *_y
; ; r2 = opus_val32 *xcorr
; ; r3 = int len
; ; output:
; ; r0 = int maxcorr
; ; internal usage:
; ; r4 = opus_val16 *x (for xcorr_kernel_neon())
; ; r5 = opus_val16 *y (for xcorr_kernel_neon())
; ; r6 = int max_pitch
; ; r12 = int j
; ; q15 = int maxcorr[4] (q15 is not used by xcorr_kernel_neon())
; STMFD sp!, {r4-r6, lr}
; LDR r6, [sp, #16]
; VMOV.S32 q15, #1
; ; if (max_pitch < 4) goto celt_pitch_xcorr_neon_process4_done
; SUBS r6, r6, #4
; BLT celt_pitch_xcorr_neon_process4_done
;celt_pitch_xcorr_neon_process4
; ; xcorr_kernel_neon parameters:
; ; r3 = len, r4 = _x, r5 = _y, q0 = {0, 0, 0, 0}
; MOV r4, r0
; MOV r5, r1
; VEOR q0, q0, q0
; ; xcorr_kernel_neon only modifies r4, r5, r12, and q0...q3.
; ; So we don't save/restore any other registers.
; BL xcorr_kernel_neon
; SUBS r6, r6, #4
; VST1.32 {q0}, [r2]!
; ; _y += 4
; ADD r1, r1, #8
; VMAX.S32 q15, q15, q0
; ; if (max_pitch < 4) goto celt_pitch_xcorr_neon_process4_done
; BGE celt_pitch_xcorr_neon_process4
;; We have less than 4 sums left to compute.
;celt_pitch_xcorr_neon_process4_done
; ADDS r6, r6, #4
; ; Reduce maxcorr to a single value
; VMAX.S32 d30, d30, d31
; VPMAX.S32 d30, d30, d30
; ; if (max_pitch <= 0) goto celt_pitch_xcorr_neon_done
; BLE celt_pitch_xcorr_neon_done
;; Now compute each remaining sum one at a time.
;celt_pitch_xcorr_neon_process_remaining
; MOV r4, r0
; MOV r5, r1
; VMOV.I32 q0, #0
; SUBS r12, r3, #8
; BLT celt_pitch_xcorr_neon_process_remaining4
;; Sum terms 8 at a time.
;celt_pitch_xcorr_neon_process_remaining_loop8
; ; Load x[0...7]
; VLD1.16 {q1}, [r4]!
; ; Load y[0...7]
; VLD1.16 {q2}, [r5]!
; SUBS r12, r12, #8
; VMLAL.S16 q0, d4, d2
; VMLAL.S16 q0, d5, d3
; BGE celt_pitch_xcorr_neon_process_remaining_loop8
;; Sum terms 4 at a time.
;celt_pitch_xcorr_neon_process_remaining4
; ADDS r12, r12, #4
; BLT celt_pitch_xcorr_neon_process_remaining4_done
; ; Load x[0...3]
; VLD1.16 {d2}, [r4]!
; ; Load y[0...3]
; VLD1.16 {d3}, [r5]!
; SUB r12, r12, #4
; VMLAL.S16 q0, d3, d2
; ; Reduce the sum to a single value.
; VADD.S32 d0, d0, d1
; VPADDL.S32 d0, d0
;celt_pitch_xcorr_neon_process_remaining4_done
; ADDS r12, r12, #4
; BLE celt_pitch_xcorr_neon_process_remaining_loop_done
;; Sum terms 1 at a time.
;celt_pitch_xcorr_neon_process_remaining_loop1
; VLD1.16 {d2[]}, [r4]!
; VLD1.16 {d3[]}, [r5]!
; SUBS r12, r12, #1
; VMLAL.S16 q0, d2, d3
; BGT celt_pitch_xcorr_neon_process_remaining_loop1
;celt_pitch_xcorr_neon_process_remaining_loop_done
; VST1.32 {d0[0]}, [r2]!
; VMAX.S32 d30, d30, d0
; SUBS r6, r6, #1
; ; _y++
; ADD r1, r1, #2
; ; if (--max_pitch > 0) goto celt_pitch_xcorr_neon_process_remaining
; BGT celt_pitch_xcorr_neon_process_remaining
;celt_pitch_xcorr_neon_done
; VMOV.32 r0, d30[0]
; LDMFD sp!, {r4-r6, pc}
; ENDP
xcorr_kernel_neon PROC
; input:
; r0 = opus_val16 *x
; r1 = opus_val16 *y
; r2 = int len
; q0 = opus_val32 sum (sum[3] | sum[2] | sum[1] | sum[0])
; output:
; q0 = sum
; internal usage:
; r3 = j
; d2 = x_3|x_2|x_1|x_0 d3 = y_3|y_2|y_1|y_0
; d4 = y_7|y_6|y_5|y_4 d5 = y_4|y_3|y_2|y_1
; d6 = y_5|y_4|y_3|y_2 d7 = y_6|y_5|y_4|y_3
; We will build d5, d6 and d7 vector from d3 and d4
VLD1.16 {d3}, [r1]! ; Load y[3] downto y[0] to d3 lane (yy0)
SUB r3, r2, #1
MOVS r3, r3, lsr #2 ; j=(len-1)>>2
BEQ xcorr_kernel_neon_process4_done
; Process 4 x samples at a time
; For this, we will need 4 y vectors
xcorr_kernel_neon_process4
SUBS r3, r3, #1 ; j--
VLD1.16 d4, [r1]! ; Load y[7] downto y[4] to d4 lane
VLD1.16 d2, [r0]! ; Load x[3] downto x[0] to d2 lane
VEXT.16 d5, d3, d4, #1 ; Build y[4] downto y[1] vector (yy1)
VEXT.16 d6, d3, d4, #2 ; Build y[5] downto y[2] vector (yy2)
VEXT.16 d7, d3, d4, #3 ; Build y[6] downto y[3] vector (yy3)
VMLAL.S16 q0, d3, d2[0] ; MAC16_16(sum, x[0], yy0)
VMLAL.S16 q0, d5, d2[1] ; MAC16_16(sum, x[1], yy1)
VMLAL.S16 q0, d6, d2[2] ; MAC16_16(sum, x[2], yy2)
VMLAL.S16 q0, d7, d2[3] ; MAC16_16(sum, x[3], yy3)
VMOV.S16 d3, d4 ; Next y vector should be in d3 (yy0)
BNE xcorr_kernel_neon_process4
xcorr_kernel_neon_process4_done
;Process len-1 to len
VLD1.16 {d2[]}, [r0]! ; Load *x and duplicate to d2 lane
SUB r3, r2, #1
ANDS r3, r3, #3 ; j=(len-1)&3
VMLAL.S16 q0, d3, d2 ; MAC16_16(sum, *x, yy0)
BEQ xcorr_kernel_neon_done
xcorr_kernel_neon_process_remaining
SUBS r3, r3, #1 ; j--
VLD1.16 {d4[]}, [r1]! ; Load y value and duplicate to d4 lane
VLD1.16 {d2[]}, [r0]! ; Load *x and duplicate to d2 lane
VEXT.16 d3, d3, d4, #1 ; Build y vector from previous and d4
VMLAL.S16 q0, d3, d2 ; MAC16_16(sum, *x, yy0)
BNE xcorr_kernel_neon_process_remaining
xcorr_kernel_neon_done
MOV pc, lr
ENDP
celt_pitch_xcorr_neon PROC
; input:
; r0 = opus_val16 *_x
; r1 = opus_val16 *_y
; r2 = opus_val32 *xcorr
; r3 = int len
; output:
; r0 = maxcorr
STMFD sp!, {r4-r9, lr}
LDR r4, [sp, #28] ; r4 = int max_pitch
MOV r5, r0 ; r5 = _x
MOV r6, r1 ; r6 = _y
MOV r7, r2 ; r7 = xcorr
MOV r2, r3 ; r2 = len
VMOV.S32 d16, #1 ; d16 = {1, 1} (not used by xcorr_kernel_neon)
MOV r8, #0 ; r8 = i = 0
CMP r4, #3 ; max_pitch-3 <= 0 ---> pitch_xcorr_neon_process4_done
BLE celt_pitch_xcorr_neon_process4_done
SUB r9, r4, #3 ; r9 = max_pitch-3
celt_pitch_xcorr_neon_process4
MOV r0, r5 ; r0 = _x
ADD r1, r6 ,r8, LSL #1 ; r1 = _y + i
VMOV.I32 q0, #0 ; q0 = opus_val32 sum[4] = {0, 0, 0, 0}
; xcorr_kernel_neon don't touch r2 (len)
; So we don't store it
BL xcorr_kernel_neon ; xcorr_kernel_neon(_x, _y+i, sum, len)
VST1.32 {q0}, [r7]! ; Store sum to xcorr
VPMAX.S32 d0, d0, d1 ; d0 = max(sum[3], sum[2]) | max(sum[1], sum[0])
ADD r8, r8, #4 ; i+=4
VPMAX.S32 d0, d0, d0 ; d0 = max(sum[3], sum[2], sum[1], sum[0])
CMP r8, r9 ; i < max_pitch-3 ----> pitch_xcorr_neon_process4
VMAX.S32 d16, d16, d0 ; d16 = maxcorr = max(maxcorr, sum)
BLT celt_pitch_xcorr_neon_process4
celt_pitch_xcorr_neon_process4_done
CMP r8, r4;
BGE celt_pitch_xcorr_neon_done
celt_pitch_xcorr_neon_process_remaining
MOV r0, r5 ; r0 = _x
ADD r1, r6, r8, LSL #1 ; r1 = _y + i
VMOV.I32 q0, #0
MOVS r3, r2, LSR #2 ; r3 = j = len
BEQ inner_loop_neon_process4_done
inner_loop_neon_process4
VLD1.16 {d2}, [r0]! ; Load x
VLD1.16 {d3}, [r1]! ; Load y
SUBS r3, r3, #1
VMLAL.S16 q0, d2, d3
BNE inner_loop_neon_process4
VPADD.S32 d0, d0, d1 ; Reduce sum
VPADD.S32 d0, d0, d0
inner_loop_neon_process4_done
ANDS r3, r2, #3
BEQ inner_loop_neon_done
inner_loop_neon_process_remaining
VLD1.16 {d2[]}, [r0]!
VLD1.16 {d3[]}, [r1]!
SUBS r3, r3, #1
VMLAL.S16 q0, d2, d3
BNE inner_loop_neon_process_remaining
inner_loop_neon_done
VST1.32 {d0[0]}, [r7]!
VMAX.S32 d16, d16, d0
ADD r8, r8, #1
CMP r8, r4
BCC celt_pitch_xcorr_neon_process_remaining
celt_pitch_xcorr_neon_done
VMOV d0, d16
VMOV.32 r0, d0[0]
LDMFD sp!, {r4-r9, pc}
ENDP
ENDIF
IF OPUS_ARM_MAY_HAVE_EDSP
; This will get used on ARMv7 devices without NEON, so it has been optimized
; to take advantage of dual-issuing where possible.
xcorr_kernel_edsp PROC
; input:
; r3 = int len
; r4 = opus_val16 *_x
; r5 = opus_val16 *_y
; r6...r9 = opus_val32 sum[4]
; output:
; r6...r9 = opus_val32 sum[4]
; preserved: r0-r5
; internal usage
; r2 = int j
; r12,r14 = opus_val16 x[4]
; r10,r11 = opus_val16 y[4]
STMFD sp!, {r2,r4,r5,lr}
SUBS r2, r3, #4 ; j = len-4
LDRD r10, r11, [r5], #8 ; Load y[0...3]
BLE xcorr_kernel_edsp_process4_done
LDR r12, [r4], #4 ; Load x[0...1]
; Stall
xcorr_kernel_edsp_process4
; The multiplies must issue from pipeline 0, and can't dual-issue with each
; other. Every other instruction here dual-issues with a multiply, and is
; thus "free". There should be no stalls in the body of the loop.
SMLABB r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x_0,y_0)
LDR r14, [r4], #4 ; Load x[2...3]
SMLABT r7, r12, r10, r7 ; sum[1] = MAC16_16(sum[1],x_0,y_1)
SUBS r2, r2, #4 ; j-=4
SMLABB r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x_0,y_2)
SMLABT r9, r12, r11, r9 ; sum[3] = MAC16_16(sum[3],x_0,y_3)
SMLATT r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x_1,y_1)
LDR r10, [r5], #4 ; Load y[4...5]
SMLATB r7, r12, r11, r7 ; sum[1] = MAC16_16(sum[1],x_1,y_2)
SMLATT r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x_1,y_3)
SMLATB r9, r12, r10, r9 ; sum[3] = MAC16_16(sum[3],x_1,y_4)
LDRGT r12, [r4], #4 ; Load x[0...1]
SMLABB r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],x_2,y_2)
SMLABT r7, r14, r11, r7 ; sum[1] = MAC16_16(sum[1],x_2,y_3)
SMLABB r8, r14, r10, r8 ; sum[2] = MAC16_16(sum[2],x_2,y_4)
SMLABT r9, r14, r10, r9 ; sum[3] = MAC16_16(sum[3],x_2,y_5)
SMLATT r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],x_3,y_3)
LDR r11, [r5], #4 ; Load y[6...7]
SMLATB r7, r14, r10, r7 ; sum[1] = MAC16_16(sum[1],x_3,y_4)
SMLATT r8, r14, r10, r8 ; sum[2] = MAC16_16(sum[2],x_3,y_5)
SMLATB r9, r14, r11, r9 ; sum[3] = MAC16_16(sum[3],x_3,y_6)
BGT xcorr_kernel_edsp_process4
xcorr_kernel_edsp_process4_done
ADDS r2, r2, #4
BLE xcorr_kernel_edsp_done
LDRH r12, [r4], #2 ; r12 = *x++
SUBS r2, r2, #1 ; j--
; Stall
SMLABB r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x,y_0)
LDRGTH r14, [r4], #2 ; r14 = *x++
SMLABT r7, r12, r10, r7 ; sum[1] = MAC16_16(sum[1],x,y_1)
SMLABB r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x,y_2)
SMLABT r9, r12, r11, r9 ; sum[3] = MAC16_16(sum[3],x,y_3)
BLE xcorr_kernel_edsp_done
SMLABT r6, r14, r10, r6 ; sum[0] = MAC16_16(sum[0],x,y_1)
SUBS r2, r2, #1 ; j--
SMLABB r7, r14, r11, r7 ; sum[1] = MAC16_16(sum[1],x,y_2)
LDRH r10, [r5], #2 ; r10 = y_4 = *y++
SMLABT r8, r14, r11, r8 ; sum[2] = MAC16_16(sum[2],x,y_3)
LDRGTH r12, [r4], #2 ; r12 = *x++
SMLABB r9, r14, r10, r9 ; sum[3] = MAC16_16(sum[3],x,y_4)
BLE xcorr_kernel_edsp_done
SMLABB r6, r12, r11, r6 ; sum[0] = MAC16_16(sum[0],tmp,y_2)
CMP r2, #1 ; j--
SMLABT r7, r12, r11, r7 ; sum[1] = MAC16_16(sum[1],tmp,y_3)
LDRH r2, [r5], #2 ; r2 = y_5 = *y++
SMLABB r8, r12, r10, r8 ; sum[2] = MAC16_16(sum[2],tmp,y_4)
LDRGTH r14, [r4] ; r14 = *x
SMLABB r9, r12, r2, r9 ; sum[3] = MAC16_16(sum[3],tmp,y_5)
BLE xcorr_kernel_edsp_done
SMLABT r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],tmp,y_3)
LDRH r11, [r5] ; r11 = y_6 = *y
SMLABB r7, r14, r10, r7 ; sum[1] = MAC16_16(sum[1],tmp,y_4)
SMLABB r8, r14, r2, r8 ; sum[2] = MAC16_16(sum[2],tmp,y_5)
SMLABB r9, r14, r11, r9 ; sum[3] = MAC16_16(sum[3],tmp,y_6)
xcorr_kernel_edsp_done
LDMFD sp!, {r2,r4,r5,pc}
ENDP
celt_pitch_xcorr_edsp PROC
; input:
; r0 = opus_val16 *_x
; r1 = opus_val16 *_y
; r2 = opus_val32 *xcorr
; r3 = int len
; output:
; r0 = maxcorr
; internal usage
; r4 = opus_val16 *x
; r5 = opus_val16 *y
; r6 = opus_val32 sum0
; r7 = opus_val32 sum1
; r8 = opus_val32 sum2
; r9 = opus_val32 sum3
; r1 = int max_pitch
; r12 = int j
STMFD sp!, {r4-r11, lr}
MOV r5, r1
LDR r1, [sp, #36]
MOV r4, r0
; maxcorr = 1
MOV r0, #1
; if (max_pitch < 4) goto celt_pitch_xcorr_edsp_process4_done
SUBS r1, r1, #4
BLT celt_pitch_xcorr_edsp_process4_done
celt_pitch_xcorr_edsp_process4
; xcorr_kernel_edsp parameters:
; r3 = len, r4 = _x, r5 = _y, r6...r9 = sum[4] = {0, 0, 0, 0}
MOV r6, #0
MOV r7, #0
MOV r8, #0
MOV r9, #0
BL xcorr_kernel_edsp ; xcorr_kernel_edsp(_x, _y+i, xcorr+i, len)
; maxcorr = max(maxcorr, sum0, sum1, sum2, sum3)
CMP r0, r6
; _y+=4
ADD r5, r5, #8
MOVLT r0, r6
CMP r0, r7
STRD r6, r7, [r2], #8
MOVLT r0, r7
CMP r0, r8
STRD r8, r9, [r2], #8
MOVLT r0, r8
CMP r0, r9
MOVLT r0, r9
SUBS r1, r1, #4
BGE celt_pitch_xcorr_edsp_process4
celt_pitch_xcorr_edsp_process4_done
ADDS r1, r1, #4
BLE celt_pitch_xcorr_edsp_done
; Now compute each remaining sum one at a time.
celt_pitch_xcorr_edsp_process_remaining
SUBS r12, r3, #4
; r14 = sum = 0
MOV r14, #0
BLT celt_pitch_xcorr_edsp_process_remaining_loop_done
LDRD r6, r7, [r4], #8
LDRD r8, r9, [r5], #8
; Stall
celt_pitch_xcorr_edsp_process_remaining_loop4
SMLABB r14, r6, r8, r14 ; sum = MAC16_16(sum, x_0, y_0)
SUBS r12, r12, #4 ; j--
SMLATT r14, r6, r8, r14 ; sum = MAC16_16(sum, x_1, y_1)
LDRGE r6, [r4], #4
SMLABB r14, r7, r9, r14 ; sum = MAC16_16(sum, x_2, y_2)
LDRGE r8, [r5], #4
SMLATT r14, r7, r9, r14 ; sum = MAC16_16(sum, x_3, y_3)
LDRGE r7, [r4], #4
LDRGE r9, [r5], #4
BGE celt_pitch_xcorr_edsp_process_remaining_loop4
celt_pitch_xcorr_edsp_process_remaining_loop_done
ADDS r12, r12, #2
LDRGE r6, [r4], #4
LDRGE r8, [r5], #4
; Stall
SMLABBGE r14, r6, r8, r14 ; sum = MAC16_16(sum, x_0, y_0)
SUBGE r12, r12, #2
SMLATTGE r14, r6, r8, r14 ; sum = MAC16_16(sum, x_1, y_1)
ADDS r12, r12, #1
LDRGEH r6, [r4], #2
LDRGEH r8, [r5], #2
; Restore _x
SUB r4, r4, r3, LSL #1
; Stall
SMLABBGE r14, r6, r8, r14 ; sum = MAC16_16(sum, *x, *y)
; Restore and advance _y
SUB r5, r5, r3, LSL #1
; maxcorr = max(maxcorr, sum)
; Stall
CMP r0, r14
ADD r5, r5, #2
MOVLT r0, r14
SUBS r1, r1, #1
; xcorr[i] = sum
STR r14, [r2], #4
BGT celt_pitch_xcorr_edsp_process_remaining
celt_pitch_xcorr_edsp_done
LDMFD sp!, {r4-r11, pc}
ENDP
ENDIF
END