shithub: opus

ref: b77c44b46f46810ae9af3a1b88d361f1daeb769b
dir: /README.draft/

View raw version
To build this source code, simply type:

% make

If this does not work, or if you want to change the default configuration (e.g., 
to compile for a fixed-point architecture), simply edit the options in the
Makefile.

To build from the git repository instead of using this draft, follow these
steps:

1) Clone the repository:

% git clone git://git.opus-codec.org/opus.git
% cd opus

2) Compile

% ./autogen.sh
% ./configure
% make

Once you have compiled the codec, there will be a opus_demo executable in
the top directory.

Usage: opus_demo [-e] <application> <sampling rate (Hz)> <channels (1/2)>
         <bits per second> [options] <input> <output>
       opus_demo -d <sampling rate (Hz)> <channels (1/2)> [options]
         <input> <output>

mode: voip | audio | restricted-lowdelay
options:
-e                   : only runs the encoder (output the bit-stream)
-d                   : only runs the decoder (reads the bit-stream as input)
-cbr                 : enable constant bitrate; default: variable bitrate
-cvbr                : enable constrained variable bitrate; default: unconstrained
-bandwidth <NB|MB|WB|SWB|FB> : audio bandwidth (from narrowband to fullband);
                               default: sampling rate
-framesize <2.5|5|10|20|40|60> : frame size in ms; default: 20
-max_payload <bytes> : maximum payload size in bytes, default: 1024
-complexity <comp>   : complexity, 0 (lowest) ... 10 (highest); default: 10
-inbandfec           : enable SILK inband FEC
-forcemono           : force mono encoding, even for stereo input
-dtx                 : enable SILK DTX
-loss <perc>         : simulate packet loss, in percent (0-100); default: 0

input and output are 16-bit PCM files (machine endian) or opus bitstreams
with simple opus_demo propritary framing.