ref: b76888dc866868c073e5f94a63ccb80912a5be41
dir: /celt/arm/arm2gnu.pl/
#!/usr/bin/perl
my $bigend; # little/big endian
my $nxstack;
$nxstack = 0;
eval 'exec /usr/local/bin/perl -S $0 ${1+"$@"}'
if $running_under_some_shell;
while ($ARGV[0] =~ /^-/) {
$_ = shift;
last if /^--/;
if (/^-n/) {
$nflag++;
next;
}
die "I don't recognize this switch: $_\\n";
}
$printit++ unless $nflag;
$\ = "\n"; # automatically add newline on print
$n=0;
$thumb = 0; # ARM mode by default, not Thumb.
@proc_stack = ();
LINE:
while (<>) {
# For ADRLs we need to add a new line after the substituted one.
$addPadding = 0;
# First, we do not dare to touch *anything* inside double quotes, do we?
# Second, if you want a dollar character in the string,
# insert two of them -- that's how ARM C and assembler treat strings.
s/^([A-Za-z_]\w*)[ \t]+DCB[ \t]*\"/$1: .ascii \"/ && do { s/\$\$/\$/g; next };
s/\bDCB\b[ \t]*\"/.ascii \"/ && do { s/\$\$/\$/g; next };
s/^(\S+)\s+RN\s+(\S+)/$1 .req r$2/ && do { s/\$\$/\$/g; next };
# If there's nothing on a line but a comment, don't try to apply any further
# substitutions (this is a cheap hack to avoid mucking up the license header)
s/^([ \t]*);/$1@/ && do { s/\$\$/\$/g; next };
# If substituted -- leave immediately !
s/@/,:/;
s/;/@/;
while ( /@.*'/ ) {
s/(@.*)'/$1/g;
}
s/\{FALSE\}/0/g;
s/\{TRUE\}/1/g;
s/\{(\w\w\w\w+)\}/$1/g;
s/\bINCLUDE[ \t]*([^ \t\n]+)/.include \"$1\"/;
s/\bGET[ \t]*([^ \t\n]+)/.include \"${ my $x=$1; $x =~ s|\.s|-gnu.S|; \$x }\"/;
s/\bIMPORT\b/.extern/;
s/\bEXPORT\b/.global/;
s/^(\s+)\[/$1IF/;
s/^(\s+)\|/$1ELSE/;
s/^(\s+)\]/$1ENDIF/;
s/IF *:DEF:/ .ifdef/;
s/IF *:LNOT: *:DEF:/ .ifndef/;
s/ELSE/ .else/;
s/ENDIF/ .endif/;
if( /\bIF\b/ ) {
s/\bIF\b/ .if/;
s/=/==/;
}
if ( $n == 2) {
s/\$/\\/g;
}
if ($n == 1) {
s/\$//g;
s/label//g;
$n = 2;
}
if ( /MACRO/ ) {
s/MACRO *\n/.macro/;
$n=1;
}
if ( /\bMEND\b/ ) {
s/\bMEND\b/.endm/;
$n=0;
}
# ".rdata" doesn't work in 'as' version 2.13.2, as it is ".rodata" there.
#
if ( /\bAREA\b/ ) {
my $align;
$align = "2";
if ( /ALIGN=(\d+)/ ) {
$align = $1;
}
if ( /CODE/ ) {
$nxstack = 1;
}
s/^(.+)CODE(.+)READONLY(.*)/ .text/;
s/^(.+)DATA(.+)READONLY(.*)/ .section .rdata/;
s/^(.+)\|\|\.data\|\|(.+)/ .data/;
s/^(.+)\|\|\.bss\|\|(.+)/ .bss/;
s/$/; .p2align $align/;
# Enable NEON instructions but don't produce a binary that requires
# ARMv7. RVCT does not have equivalent directives, so we just do this
# for all CODE areas.
if ( /.text/ ) {
# Separating .arch, .fpu, etc., by semicolons does not work (gas
# thinks the semicolon is part of the arch name, even when there's
# whitespace separating them). Sadly this means our line numbers
# won't match the original source file (we could use the .line
# directive, which is documented to be obsolete, but then gdb will
# show the wrong line in the translated source file).
s/$/; .arch armv7-a\n .fpu neon\n .object_arch armv4t/;
}
}
s/\|\|\.constdata\$(\d+)\|\|/.L_CONST$1/; # ||.constdata$3||
s/\|\|\.bss\$(\d+)\|\|/.L_BSS$1/; # ||.bss$2||
s/\|\|\.data\$(\d+)\|\|/.L_DATA$1/; # ||.data$2||
s/\|\|([a-zA-Z0-9_]+)\@([a-zA-Z0-9_]+)\|\|/@ $&/;
s/^(\s+)\%(\s)/ .space $1/;
s/\|(.+)\.(\d+)\|/\.$1_$2/; # |L80.123| -> .L80_123
s/\bCODE32\b/.code 32/ && do {$thumb = 0};
s/\bCODE16\b/.code 16/ && do {$thumb = 1};
if (/\bPROC\b/)
{
my $prefix;
my $proc;
/^([A-Za-z_\.]\w+)\b/;
$proc = $1;
$prefix = "";
if ($proc)
{
$prefix = $prefix.sprintf("\t.type\t%s, %%function; ",$proc);
push(@proc_stack, $proc);
s/^[A-Za-z_\.]\w+/$&:/;
}
$prefix = $prefix."\t.thumb_func; " if ($thumb);
s/\bPROC\b/@ $&/;
$_ = $prefix.$_;
}
s/^(\s*)(S|Q|SH|U|UQ|UH)ASX\b/$1$2ADDSUBX/;
s/^(\s*)(S|Q|SH|U|UQ|UH)SAX\b/$1$2SUBADDX/;
if (/\bENDP\b/)
{
my $proc;
s/\bENDP\b/@ $&/;
$proc = pop(@proc_stack);
$_ = "\t.size $proc, .-$proc".$_ if ($proc);
}
s/\bSUBT\b/@ $&/;
s/\bDATA\b/@ $&/; # DATA directive is deprecated -- Asm guide, p.7-25
s/\bKEEP\b/@ $&/;
s/\bEXPORTAS\b/@ $&/;
s/\|\|(.)+\bEQU\b/@ $&/;
s/\|\|([\w\$]+)\|\|/$1/;
s/\bENTRY\b/@ $&/;
s/\bASSERT\b/@ $&/;
s/\bGBLL\b/@ $&/;
s/\bGBLA\b/@ $&/;
s/^\W+OPT\b/@ $&/;
s/:OR:/|/g;
s/:SHL:/<</g;
s/:SHR:/>>/g;
s/:AND:/&/g;
s/:LAND:/&&/g;
s/CPSR/cpsr/;
s/SPSR/spsr/;
s/ALIGN$/.balign 4/;
s/ALIGN\s+([0-9x]+)$/.balign $1/;
s/psr_cxsf/psr_all/;
s/LTORG/.ltorg/;
s/^([A-Za-z_]\w*)[ \t]+EQU/ .set $1,/;
s/^([A-Za-z_]\w*)[ \t]+SETL/ .set $1,/;
s/^([A-Za-z_]\w*)[ \t]+SETA/ .set $1,/;
s/^([A-Za-z_]\w*)[ \t]+\*/ .set $1,/;
# {PC} + 0xdeadfeed --> . + 0xdeadfeed
s/\{PC\} \+/ \. +/;
# Single hex constant on the line !
#
# >>> NOTE <<<
# Double-precision floats in gcc are always mixed-endian, which means
# bytes in two words are little-endian, but words are big-endian.
# So, 0x0000deadfeed0000 would be stored as 0x0000dead at low address
# and 0xfeed0000 at high address.
#
s/\bDCFD\b[ \t]+0x([a-fA-F0-9]{8})([a-fA-F0-9]{8})/.long 0x$1, 0x$2/;
# Only decimal constants on the line, no hex !
s/\bDCFD\b[ \t]+([0-9\.\-]+)/.double $1/;
# Single hex constant on the line !
# s/\bDCFS\b[ \t]+0x([a-f0-9]{8})([a-f0-9]{8})/.long 0x$1, 0x$2/;
# Only decimal constants on the line, no hex !
# s/\bDCFS\b[ \t]+([0-9\.\-]+)/.double $1/;
s/\bDCFS[ \t]+0x/.word 0x/;
s/\bDCFS\b/.float/;
s/^([A-Za-z_]\w*)[ \t]+DCD/$1 .word/;
s/\bDCD\b/.word/;
s/^([A-Za-z_]\w*)[ \t]+DCW/$1 .short/;
s/\bDCW\b/.short/;
s/^([A-Za-z_]\w*)[ \t]+DCB/$1 .byte/;
s/\bDCB\b/.byte/;
s/^([A-Za-z_]\w*)[ \t]+\%/.comm $1,/;
s/^[A-Za-z_\.]\w+/$&:/;
s/^(\d+)/$1:/;
s/\%(\d+)/$1b_or_f/;
s/\%[Bb](\d+)/$1b/;
s/\%[Ff](\d+)/$1f/;
s/\%[Ff][Tt](\d+)/$1f/;
s/&([\dA-Fa-f]+)/0x$1/;
if ( /\b2_[01]+\b/ ) {
s/\b2_([01]+)\b/conv$1&&&&/g;
while ( /[01][01][01][01]&&&&/ ) {
s/0000&&&&/&&&&0/g;
s/0001&&&&/&&&&1/g;
s/0010&&&&/&&&&2/g;
s/0011&&&&/&&&&3/g;
s/0100&&&&/&&&&4/g;
s/0101&&&&/&&&&5/g;
s/0110&&&&/&&&&6/g;
s/0111&&&&/&&&&7/g;
s/1000&&&&/&&&&8/g;
s/1001&&&&/&&&&9/g;
s/1010&&&&/&&&&A/g;
s/1011&&&&/&&&&B/g;
s/1100&&&&/&&&&C/g;
s/1101&&&&/&&&&D/g;
s/1110&&&&/&&&&E/g;
s/1111&&&&/&&&&F/g;
}
s/000&&&&/&&&&0/g;
s/001&&&&/&&&&1/g;
s/010&&&&/&&&&2/g;
s/011&&&&/&&&&3/g;
s/100&&&&/&&&&4/g;
s/101&&&&/&&&&5/g;
s/110&&&&/&&&&6/g;
s/111&&&&/&&&&7/g;
s/00&&&&/&&&&0/g;
s/01&&&&/&&&&1/g;
s/10&&&&/&&&&2/g;
s/11&&&&/&&&&3/g;
s/0&&&&/&&&&0/g;
s/1&&&&/&&&&1/g;
s/conv&&&&/0x/g;
}
if ( /commandline/)
{
if( /-bigend/)
{
$bigend=1;
}
}
if ( /\bDCDU\b/ )
{
my $cmd=$_;
my $value;
my $prefix;
my $w1;
my $w2;
my $w3;
my $w4;
s/\s+DCDU\b/@ $&/;
$cmd =~ /\bDCDU\b\s+0x(\d+)/;
$value = $1;
$value =~ /(\w\w)(\w\w)(\w\w)(\w\w)/;
$w1 = $1;
$w2 = $2;
$w3 = $3;
$w4 = $4;
if( $bigend ne "")
{
# big endian
$prefix = "\t.byte\t0x".$w1.";".
"\t.byte\t0x".$w2.";".
"\t.byte\t0x".$w3.";".
"\t.byte\t0x".$w4."; ";
}
else
{
# little endian
$prefix = "\t.byte\t0x".$w4.";".
"\t.byte\t0x".$w3.";".
"\t.byte\t0x".$w2.";".
"\t.byte\t0x".$w1."; ";
}
$_=$prefix.$_;
}
if ( /\badrl\b/i )
{
s/\badrl\s+(\w+)\s*,\s*(\w+)/ldr $1,=$2/i;
$addPadding = 1;
}
s/\bEND\b/@ END/;
} continue {
printf ("%s", $_) if $printit;
if ($addPadding != 0)
{
printf (" mov r0,r0\n");
$addPadding = 0;
}
}
#If we had a code section, mark that this object doesn't need an executable
# stack.
if ($nxstack) {
printf (" .section\t.note.GNU-stack,\"\",\%\%progbits\n");
}