ref: fcb27f12ee85d068e6b07fccc102ddf70c153c1f
dir: /src/strife/p_floor.c/
// Emacs style mode select -*- C++ -*-
//-----------------------------------------------------------------------------
//
// Copyright(C) 1993-1996 Id Software, Inc.
// Copyright(C) 2005 Simon Howard
//
// This program is free software; you can redistribute it and/or
// modify it under the terms of the GNU General Public License
// as published by the Free Software Foundation; either version 2
// of the License, or (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
// 02111-1307, USA.
//
// DESCRIPTION:
// Floor animation: raising stairs.
//
//-----------------------------------------------------------------------------
#include "z_zone.h"
#include "doomdef.h"
#include "p_local.h"
#include "s_sound.h"
// State.
#include "doomstat.h"
#include "r_state.h"
// Data.
#include "sounds.h"
//
// FLOORS
//
//
// Move a plane (floor or ceiling) and check for crushing
//
result_e
T_MovePlane
( sector_t* sector,
fixed_t speed,
fixed_t dest,
boolean crush,
int floorOrCeiling,
int direction )
{
boolean flag;
fixed_t lastpos;
switch(floorOrCeiling)
{
case 0:
// FLOOR
switch(direction)
{
case -1:
// DOWN
if (sector->floorheight - speed < dest)
{
// villsa [STRIFE] unused
//lastpos = sector->floorheight;
sector->floorheight = dest;
flag = P_ChangeSector(sector,crush);
// villsa [STRIFE] unused
/*if (flag == true)
{
sector->floorheight =lastpos;
P_ChangeSector(sector,crush);
//return crushed;
}*/
return pastdest;
}
else
{
// villsa [STRIFE] unused
//lastpos = sector->floorheight;
sector->floorheight -= speed;
flag = P_ChangeSector(sector,crush);
// villsa [STRIFE] unused
/*if (flag == true)
{
sector->floorheight = lastpos;
P_ChangeSector(sector,crush);
return crushed;
}*/
return ok;
}
break;
case 1:
// UP
if (sector->floorheight + speed > dest)
{
lastpos = sector->floorheight;
sector->floorheight = dest;
flag = P_ChangeSector(sector,crush);
if (flag == true)
{
sector->floorheight = lastpos;
P_ChangeSector(sector,crush);
//return crushed;
}
return pastdest;
}
else
{
// COULD GET CRUSHED
lastpos = sector->floorheight;
sector->floorheight += speed;
flag = P_ChangeSector(sector,crush);
if (flag == true)
{
// villsa [STRIFE] unused
//if (crush == true)
//return crushed;
sector->floorheight = lastpos;
P_ChangeSector(sector,crush);
return crushed;
}
else
return ok;
}
break;
}
break;
case 1:
// CEILING
switch(direction)
{
case -1:
// DOWN
if (sector->ceilingheight - speed < dest)
{
lastpos = sector->ceilingheight;
sector->ceilingheight = dest;
flag = P_ChangeSector(sector,crush);
if (flag == true)
{
sector->ceilingheight = lastpos;
P_ChangeSector(sector,crush);
//return crushed;
}
return pastdest;
}
else
{
// COULD GET CRUSHED
lastpos = sector->ceilingheight;
sector->ceilingheight -= speed;
flag = P_ChangeSector(sector,crush);
if (flag == true)
{
if (crush == true)
return crushed;
sector->ceilingheight = lastpos;
P_ChangeSector(sector,crush);
return crushed;
}
}
break;
case 1:
// UP
if (sector->ceilingheight + speed > dest)
{
// villsa [STRIFE] unused
//lastpos = sector->ceilingheight;
sector->ceilingheight = dest;
// villsa [STRIFE] unused
//flag = P_ChangeSector(sector,crush);
/*if (flag == true)
{
sector->ceilingheight = lastpos;
P_ChangeSector(sector,crush);
//return crushed;
}*/
return pastdest;
}
else
{
// villsa [STRIFE] unused
//lastpos = sector->ceilingheight;
sector->ceilingheight += speed;
// villsa [STRIFE] unused
//flag = P_ChangeSector(sector,crush);
return ok;
}
break;
}
break;
}
return ok;
}
//
// MOVE A FLOOR TO IT'S DESTINATION (UP OR DOWN)
//
void T_MoveFloor(floormove_t* floor)
{
result_e res;
res = T_MovePlane(floor->sector,
floor->speed,
floor->floordestheight,
floor->crush,0,floor->direction);
if (!(leveltime&7))
S_StartSound(&floor->sector->soundorg, sfx_stnmov);
if (res == pastdest)
{
floor->sector->specialdata = NULL;
if (floor->direction == 1)
{
switch(floor->type)
{
case donutRaise:
floor->sector->special = floor->newspecial;
floor->sector->floorpic = floor->texture;
default:
break;
}
}
else if (floor->direction == -1)
{
switch(floor->type)
{
case lowerAndChange:
floor->sector->special = floor->newspecial;
floor->sector->floorpic = floor->texture;
default:
break;
}
}
P_RemoveThinker(&floor->thinker);
S_StartSound(&floor->sector->soundorg, sfx_pstop);
}
}
//
// HANDLE FLOOR TYPES
//
// haleyjd 09/16/2010: [STRIFE] Modifications to floortypes:
// * raiseFloor24 was changed into raiseFloor64
// * turboLower does not appear to adjust the floor height (STRIFE-TODO: verify)
// * raiseFloor512AndChange type was added.
//
int
EV_DoFloor
( line_t* line,
floor_e floortype )
{
int secnum;
int rtn;
int i;
sector_t* sec;
floormove_t* floor;
secnum = -1;
rtn = 0;
while ((secnum = P_FindSectorFromLineTag(line,secnum)) >= 0)
{
sec = §ors[secnum];
// ALREADY MOVING? IF SO, KEEP GOING...
if (sec->specialdata)
continue;
// new floor thinker
rtn = 1;
floor = Z_Malloc (sizeof(*floor), PU_LEVSPEC, 0);
P_AddThinker (&floor->thinker);
sec->specialdata = floor;
floor->thinker.function.acp1 = (actionf_p1) T_MoveFloor;
floor->type = floortype;
floor->crush = false;
switch(floortype)
{
case lowerFloor: // [STRIFE] verified unmodified
floor->direction = -1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight =
P_FindHighestFloorSurrounding(sec);
break;
case lowerFloorToLowest: // [STRIFE] verified unmodified
floor->direction = -1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight =
P_FindLowestFloorSurrounding(sec);
break;
case turboLower: // [STRIFE] Modified: does not += 8
floor->direction = -1;
floor->sector = sec;
floor->speed = FLOORSPEED * 4;
floor->floordestheight =
P_FindHighestFloorSurrounding(sec);
//if (floor->floordestheight != sec->floorheight)
// floor->floordestheight += 8*FRACUNIT;
break;
case raiseFloorCrush: // [STRIFE] verified unmodified
floor->crush = true;
case raiseFloor:
floor->direction = 1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight =
P_FindLowestCeilingSurrounding(sec);
if (floor->floordestheight > sec->ceilingheight)
floor->floordestheight = sec->ceilingheight;
floor->floordestheight -= (8*FRACUNIT)*
(floortype == raiseFloorCrush);
break;
case raiseFloorTurbo: // [STRIFE] verified unmodified
floor->direction = 1;
floor->sector = sec;
floor->speed = FLOORSPEED*4;
floor->floordestheight =
P_FindNextHighestFloor(sec,sec->floorheight);
break;
case raiseFloorToNearest: // [STRIFE] verified unmodified
floor->direction = 1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight =
P_FindNextHighestFloor(sec,sec->floorheight);
break;
case raiseFloor64: // [STRIFE] modified from raiseFloor24!
floor->direction = 1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight = floor->sector->floorheight +
64 * FRACUNIT; // [STRIFE]
break;
case raiseFloor512: // [STRIFE] verified unmodified
floor->direction = 1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight = floor->sector->floorheight +
512 * FRACUNIT;
break;
case raiseFloor24AndChange: // [STRIFE] verified unmodified
floor->direction = 1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight = floor->sector->floorheight +
24 * FRACUNIT;
sec->floorpic = line->frontsector->floorpic;
sec->special = line->frontsector->special;
break;
case raiseFloor512AndChange: // [STRIFE] New floor type
floor->direction = 1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight = floor->sector->floorheight +
512 * FRACUNIT;
sec->floorpic = line->frontsector->floorpic;
sec->special = line->frontsector->special;
break;
case raiseToTexture: // [STRIFE] verified unmodified
{
int minsize = INT_MAX;
side_t* side;
floor->direction = 1;
floor->sector = sec;
floor->speed = FLOORSPEED;
for (i = 0; i < sec->linecount; i++)
{
if (twoSided (secnum, i) )
{
side = getSide(secnum,i,0);
if (side->bottomtexture >= 0)
if (textureheight[side->bottomtexture] <
minsize)
minsize =
textureheight[side->bottomtexture];
side = getSide(secnum,i,1);
if (side->bottomtexture >= 0)
if (textureheight[side->bottomtexture] <
minsize)
minsize =
textureheight[side->bottomtexture];
}
}
floor->floordestheight =
floor->sector->floorheight + minsize;
}
break;
case lowerAndChange: // [STRIFE] verified unmodified
floor->direction = -1;
floor->sector = sec;
floor->speed = FLOORSPEED;
floor->floordestheight =
P_FindLowestFloorSurrounding(sec);
floor->texture = sec->floorpic;
for (i = 0; i < sec->linecount; i++)
{
if ( twoSided(secnum, i) )
{
if (getSide(secnum,i,0)->sector-sectors == secnum)
{
sec = getSector(secnum,i,1);
if (sec->floorheight == floor->floordestheight)
{
floor->texture = sec->floorpic;
floor->newspecial = sec->special;
break;
}
}
else
{
sec = getSector(secnum,i,0);
if (sec->floorheight == floor->floordestheight)
{
floor->texture = sec->floorpic;
floor->newspecial = sec->special;
break;
}
}
}
}
default:
break;
}
}
return rtn;
}
//
// BUILD A STAIRCASE!
//
int
EV_BuildStairs
( line_t* line,
stair_e type )
{
int secnum;
int height;
int i;
int newsecnum;
int texture;
int ok;
int rtn;
sector_t* sec;
sector_t* tsec;
floormove_t* floor;
// Either Watcom or Rogue moved the switch out of the loop below, probably
// because it was a loop invariant, and put the default values in the
// initializers here. I cannot be bothered to figure it out without doing
// this myself :P
fixed_t stairsize = 8*FRACUNIT;
fixed_t speed = FLOORSPEED;
int direction = 1;
switch(type)
{
case build8: // [STRIFE] Verified unmodified.
speed = FLOORSPEED/4;
break;
case turbo16: // [STRIFE] Verified unmodified.
speed = FLOORSPEED*4;
stairsize = 16*FRACUNIT;
break;
case buildDown16: // [STRIFE] New stair type
stairsize = -16*FRACUNIT;
direction = -1;
break;
}
secnum = -1;
rtn = 0;
while ((secnum = P_FindSectorFromLineTag(line,secnum)) >= 0)
{
sec = §ors[secnum];
// ALREADY MOVING? IF SO, KEEP GOING...
if (sec->specialdata)
continue;
// new floor thinker
rtn = 1;
floor = Z_Malloc (sizeof(*floor), PU_LEVSPEC, 0);
P_AddThinker (&floor->thinker);
sec->specialdata = floor;
floor->thinker.function.acp1 = (actionf_p1) T_MoveFloor;
floor->direction = 1;
floor->sector = sec;
floor->speed = speed;
height = sec->floorheight + stairsize;
floor->floordestheight = height;
texture = sec->floorpic;
// Find next sector to raise
// 1. Find 2-sided line with same sector side[0]
// 2. Other side is the next sector to raise
do
{
ok = 0;
for (i = 0;i < sec->linecount;i++)
{
if ( !((sec->lines[i])->flags & ML_TWOSIDED) )
continue;
tsec = (sec->lines[i])->frontsector;
newsecnum = tsec-sectors;
if (secnum != newsecnum)
continue;
tsec = (sec->lines[i])->backsector;
newsecnum = tsec - sectors;
if (tsec->floorpic != texture)
continue;
height += stairsize;
if (tsec->specialdata)
continue;
sec = tsec;
secnum = newsecnum;
floor = Z_Malloc (sizeof(*floor), PU_LEVSPEC, 0);
P_AddThinker (&floor->thinker);
sec->specialdata = floor;
floor->thinker.function.acp1 = (actionf_p1) T_MoveFloor;
floor->direction = direction; // [STRIFE]: for buildDown16
floor->sector = sec;
floor->speed = speed;
floor->floordestheight = height;
ok = 1;
break;
}
} while(ok);
}
return rtn;
}