ref: 7643cb226276d64cdc62c4740eed9980d5b9a531
dir: /appl/examples/minitel/miniterm.b/
#
# Copyright © 1998 Vita Nuova Limited. All rights reserved.
#
implement Miniterm;
include "sys.m";
sys: Sys;
print, fprint, sprint, read: import sys;
include "draw.m";
draw: Draw;
include "tk.m";
tk: Tk;
include "tkclient.m";
tkclient: Tkclient;
include "dial.m";
dial: Dial;
include "miniterm.m";
Miniterm: module
{
init: fn(ctxt: ref Draw->Context, argv: list of string);
};
pgrp: int = 0;
debug: array of int = array[256] of {* => 0};
stderr: ref Sys->FD;
# Minitel terminal identification request - reply sequence
TERMINALID1 := array [] of {
byte SOH,
byte 'S', byte 'X', byte '1', byte 'H', byte 'N',
byte EOT
};
TERMINALID2 := array [] of {
byte SOH,
byte 'C', byte 'g', byte '1',
byte EOT
};
# Minitel module identifiers
Mscreen, Mmodem, Mkeyb, Msocket, Nmodule: con iota;
Pscreen, Pmodem, Pkeyb, Psocket: con (1 << iota);
Modname := array [Nmodule] of {
Mscreen => "S",
Mmodem => "M",
Mkeyb => "K",
Msocket => "C",
* => "?",
};
# attributes common to all modules
Module: adt {
path: int; # bitset to connected modules
disabled: int;
};
# A BufChan queues events from the terminal to the modules
BufChan: adt {
path: int; # id bit
ch: chan of ref Event; # set to `in' or `dummy' channel
ev: ref Event; # next event to send
in: chan of ref Event; # real channel for Events to the device
q: array of ref Event; # subsequent events to send
};
# holds state information for the minitel `protocol` (chapter 6)
PState: adt {
state: int;
arg: array of int; # up to 3 arguments: X,Y,Z
nargs: int; # expected number of arguments
n: int; # progress
skip: int; # transparency; bytes to skip
};
PSstart, PSesc, PSarg: con iota; # states
# Terminal display modes
Videotex, Mixed, Ascii,
# Connection methods
Direct, Network,
# Terminal connection states
Local, Connecting, Online,
# Special features
Echo
: con (1 << iota);
Terminal: adt {
in: chan of ref Event;
out: array of ref BufChan; # buffered output to the minitel modules
mode: int; # display mode
state: int; # connection state
spec: int; # special features
connect: int; # Direct, or Network
toplevel: ref Tk->Toplevel;
cmd: chan of string; # from Tk
proto: array of ref PState; # minitel protocol state
netaddr: string; # network address to dial
buttonsleft: int; # display buttons on the LHS (40 cols)
terminalid: array of byte; # ENQROM response
kbctl: chan of string; # softkeyboard control
kbmode: string; # softkeyboard mode
init: fn(t: self ref Terminal, toplevel: ref Tk->Toplevel, connect: int);
run: fn(t: self ref Terminal, done: chan of int);
reset: fn(t: self ref Terminal);
quit: fn(t: self ref Terminal);
layout: fn(t: self ref Terminal, cols: int);
setkbmode: fn(t: self ref Terminal, tmode: int);
};
include "arg.m";
include "event.m";
include "event.b";
include "keyb.b";
include "modem.b";
include "socket.b";
include "screen.b";
K: ref Keyb;
M: ref Modem;
C: ref Socket;
S: ref Screen;
T: ref Terminal;
Modules: array of ref Module;
init(ctxt: ref Draw->Context, argv: list of string)
{
s: string;
netaddr: string = nil;
sys = load Sys Sys->PATH;
tk = load Tk Tk->PATH;
tkclient = load Tkclient Tkclient->PATH;
tkclient->init();
draw = load Draw Draw->PATH;
dial = load Dial Dial->PATH;
stderr = sys->fildes(2);
pgrp = sys->pctl(Sys->NEWPGRP|Sys->FORKNS, nil);
arg := load Arg Arg->PATH;
arg->init(argv);
arg->setusage("miniterm [netaddr]");
while((c := arg->opt()) != 0){
case c {
'D' =>
s = arg->earg();
for(i := 0; i < len s; i++){
c = s[i];
if(c < len debug)
debug[c] += 1;
}
* =>
arg->usage();
}
}
argv = arg->argv();
if(len argv > 0) {
netaddr = hd argv;
argv = tl argv;
}
if(argv != nil)
arg->usage();
arg = nil;
# usage: miniterm modem[!init[!number]]
# or miniterm tcp!a.b.c.d
connect: int;
initstr := dialstr := string nil;
if(netaddr == nil)
netaddr = "tcp!pdc.minitelfr.com!513"; # gateway
(nil, words) := sys->tokenize(netaddr, "!");
if(len words == 0) {
connect = Direct;
words = "modem" :: nil;
}
if(hd words == "modem") {
connect = Direct;
words = tl words;
if(words != nil) {
initstr = hd words;
words = tl words;
if(words != nil)
dialstr = hd words;
}
if(initstr == "*")
initstr = nil;
if(dialstr == "*")
dialstr = nil;
} else {
connect = Network;
dialstr = netaddr;
}
T = ref Terminal;
K = ref Keyb;
M = ref Modem;
C = ref Socket;
S = ref Screen;
Modules = array [Nmodule] of {
Mscreen => S.m,
Mmodem => M.m,
Mkeyb => K.m,
Msocket => C.m,
};
toplevel := tk->toplevel(ctxt.display, "");
inittk(toplevel, connect);
T.init(toplevel, connect);
K.init(toplevel);
M.init(connect, initstr, dialstr);
C.init();
case connect {
Direct =>
S.init(ctxt, Rect((0,0), (640,425)), Rect((0,0), (640,425)));
Network =>
S.init(ctxt, Rect((0,0), (596,440)), Rect((0,50), (640,350)));
}
done := chan of int;
spawn K.run();
spawn M.run();
spawn C.run();
spawn S.run();
spawn T.run(done);
<- done;
# now tidy up
K.quit();
M.quit();
C.quit();
S.quit();
T.quit();
}
# the keyboard module handles keypresses and focus
BTN40x25: con "-height 24 -font {/fonts/lucidasans/unicode.6.font}";
BTNCTL: con "-width 60 -height 20 -font {/fonts/lucidasans/unicode.7.font}";
BTNMAIN: con "-width 80 -height 20 -font {/fonts/lucidasans/unicode.7.font}";
tkinitbs := array[] of {
"button .cxfin -text {Cx/Fin} -command {send keyb skey Connect}",
"button .done -text {Quitter} -command {send keyb skey Exit}",
"button .hup -text {Raccr.} -command {send term hangup}",
"button .somm -text {Somm.} -command {send keyb skey Index}",
"button .guide -text {Guide} -command {send keyb skey Guide}",
"button .annul -text {Annul.} -command {send keyb skey Cancel}",
"button .corr -text {Corr.} -command {send keyb skey Correct}",
"button .retour -text {Retour} -command {send keyb skey Previous}",
"button .suite -text {Suite} -command {send keyb skey Next}",
"button .repet -text {Répét.} -command {send keyb skey Repeat}",
"button .envoi -text {Envoi} -command {send keyb skey Send}",
"button .play -text {P} -command {send term play}",
# "button .db -text {D} -command {send term debug}" ,
"button .kb -text {Clavier} -command {send term keyboard}",
"button .move -text {<-} -command {send term buttonsleft} " + BTN40x25,
};
tkinitdirect := array [] of {
". configure -background black -height 480 -width 640",
".cxfin configure " + BTNCTL,
".hup configure " + BTNCTL,
".done configure " + BTNCTL,
".somm configure " + BTNMAIN,
".guide configure " + BTNMAIN,
".annul configure " + BTNMAIN,
".corr configure " + BTNMAIN,
".retour configure " + BTNMAIN,
".suite configure " + BTNMAIN,
".repet configure " + BTNMAIN,
".envoi configure " + BTNMAIN,
# ".play configure " + BTNCTL,
# ".db configure " + BTNCTL,
".kb configure " + BTNCTL,
"canvas .c -height 425 -width 640 -background black",
"bind .c <Configure> {send term resize}",
"bind .c <Key> {send keyb key %K}",
"bind .c <FocusIn> {send keyb focusin}",
"bind .c <FocusOut> {send keyb focusout}",
"bind .c <ButtonRelease> {focus .c; send keyb click %x %y}",
"frame .k -height 55 -width 640 -background black",
"pack propagate .k no",
"frame .klhs -background black",
"frame .krhs -background black",
"frame .krows -background black",
"frame .k1 -background black",
"frame .k2 -background black",
"pack .cxfin -in .klhs -anchor w -pady 4",
"pack .hup -in .klhs -anchor w",
"pack .somm .annul .retour .repet -in .k1 -side left -padx 2",
"pack .guide .corr .suite .envoi -in .k2 -side left -padx 2",
"pack .kb -in .krhs -anchor e -pady 4",
"pack .done -in .krhs -anchor e",
"pack .k1 -in .krows -pady 4",
"pack .k2 -in .krows",
"pack .klhs .krows .krhs -in .k -side left -expand 1 -fill x",
"pack .c .k",
"focus .c",
"update",
};
tkinitip := array [] of {
". configure -background black -height 440 -width 640",
# ip 40x25 mode support
"canvas .c40 -height 440 -width 596 -background black",
"bind .c40 <Configure> {send term resize}",
"bind .c40 <Key> {send keyb key %K}",
"bind .c40 <FocusIn> {send keyb focusin}",
"bind .c40 <FocusOut> {send keyb focusout}",
"bind .c40 <ButtonRelease> {focus .c40; send keyb click %x %y}",
"frame .k -height 427 -width 44 -background black",
"frame .gap1 -background black",
"frame .gap2 -background black",
"pack propagate .k no",
# ip 80x25 mode support
"frame .padtop -height 50",
"canvas .c80 -height 300 -width 640 -background black",
"bind .c80 <Configure> {send term resize}",
"bind .c80 <Key> {send keyb key %K}",
"bind .c80 <FocusIn> {send keyb focusin}",
"bind .c80 <FocusOut> {send keyb focusout}",
"bind .c80 <ButtonRelease> {focus .c80; send keyb click %x %y}",
"frame .k80 -height 90 -width 640 -background black",
"pack propagate .k80 no",
"frame .klhs -background black",
"frame .krows -background black",
"frame .krow1 -background black",
"frame .krow2 -background black",
"frame .krhs -background black",
"pack .krow1 .krow2 -in .krows -pady 2",
"pack .klhs -in .k80 -side left",
"pack .krows -in .k80 -side left -expand 1",
"pack .krhs -in .k80 -side left",
};
tkip40x25show := array [] of {
".cxfin configure " + BTN40x25,
".hup configure " + BTN40x25,
".done configure " + BTN40x25,
".somm configure " + BTN40x25,
".guide configure " + BTN40x25,
".annul configure " + BTN40x25,
".corr configure " + BTN40x25,
".retour configure " + BTN40x25,
".suite configure " + BTN40x25,
".repet configure " + BTN40x25,
".envoi configure " + BTN40x25,
".play configure " + BTN40x25,
# ".db configure " + BTN40x25,
".kb configure " + BTN40x25,
"pack .cxfin -in .k -side top -fill x",
"pack .gap1 -in .k -side top -expand 1",
"pack .guide .repet .somm .annul .corr .retour .suite .envoi -in .k -side top -fill x",
"pack .gap2 -in .k -side top -expand 1",
"pack .done .hup .kb .move -in .k -side bottom -pady 2 -fill x",
# "pack .db -in .k -side bottom",
};
tkip40x25lhs := array [] of {
".move configure -text {->} -command {send term buttonsright}",
"pack .k .c40 -side left",
"focus .c40",
"update",
};
tkip40x25rhs := array [] of {
".move configure -text {<-} -command {send term buttonsleft}",
"pack .c40 .k -side left",
"focus .c40",
"update",
};
tkip40x25hide := array [] of {
"pack forget .k .c40",
};
tkip80x25show := array [] of {
".cxfin configure " + BTNCTL,
".hup configure " + BTNCTL,
".done configure " + BTNCTL,
".somm configure " + BTNMAIN,
".guide configure " + BTNMAIN,
".annul configure " + BTNMAIN,
".corr configure " + BTNMAIN,
".retour configure " + BTNMAIN,
".suite configure " + BTNMAIN,
".repet configure " + BTNMAIN,
".envoi configure " + BTNMAIN,
# ".play configure " + BTNCTL,
# ".db configure " + BTNCTL,
".kb configure " + BTNCTL,
"pack .cxfin .hup -in .klhs -anchor w -pady 2",
"pack .somm .annul .retour .repet -in .krow1 -side left -padx 2",
"pack .guide .corr .suite .envoi -in .krow2 -side left -padx 2",
"pack .done .kb -in .krhs -anchor e -pady 2",
"pack .padtop .c80 .k80 -side top",
"focus .c80",
"update",
};
tkip80x25hide := array [] of {
"pack forget .padtop .c80 .k80",
};
inittk(toplevel: ref Tk->Toplevel, connect: int)
{
tkcmds(toplevel, tkinitbs);
if(connect == Direct)
tkcmds(toplevel, tkinitdirect);
else
tkcmds(toplevel, tkinitip);
}
Terminal.layout(t: self ref Terminal, cols: int)
{
if(t.connect == Direct)
return;
if(cols == 80) {
tkcmds(t.toplevel, tkip40x25hide);
tkcmds(t.toplevel, tkip80x25show);
} else {
tkcmds(t.toplevel, tkip80x25hide);
tkcmds(t.toplevel, tkip40x25show);
if (t.buttonsleft)
tkcmds(t.toplevel, tkip40x25lhs);
else
tkcmds(t.toplevel, tkip40x25rhs);
}
}
Terminal.init(t: self ref Terminal, toplevel: ref Tk->Toplevel, connect: int)
{
t.in = chan of ref Event;
t.proto = array [Nmodule] of {
Mscreen => ref PState(PSstart, array [] of {0,0,0}, 0, 0, 0),
Mmodem => ref PState(PSstart, array [] of {0,0,0}, 0, 0, 0),
Mkeyb => ref PState(PSstart, array [] of {0,0,0}, 0, 0, 0),
Msocket => ref PState(PSstart, array [] of {0,0,0}, 0, 0, 0),
};
t.toplevel = toplevel;
t.connect = connect;
if (t.connect == Direct)
t.spec = 0;
else
t.spec = Echo;
t.cmd = chan of string;
tk->namechan(t.toplevel, t.cmd, "term"); # Tk -> terminal
t.state = Local;
t.buttonsleft = 0;
t.kbctl = nil;
t.kbmode = "minitel";
t.reset();
}
Terminal.reset(t: self ref Terminal)
{
t.mode = Videotex;
}
Terminal.run(t: self ref Terminal, done: chan of int)
{
t.out = array [Nmodule] of {
Mscreen => ref BufChan(Pscreen, nil, nil, S.in, array [0] of ref Event),
Mmodem => ref BufChan(Pmodem, nil, nil, M.in, array [0] of ref Event),
Mkeyb => ref BufChan(Pkeyb, nil, nil, K.in, array [0] of ref Event),
Msocket => ref BufChan(Psocket, nil, nil, C.in, array [0] of ref Event),
};
modcount := Nmodule;
if(debug['P'])
post(ref Event.Eproto(Pmodem, 0, Cplay, "play", 0,0,0));
Evloop:
for(;;) {
ev: ref Event = nil;
post(nil);
alt {
# recv message from one of the modules
ev =<- t.in =>
if(ev == nil) { # modules ack Equit with nil
if(--modcount == 0)
break Evloop;
continue;
}
pick e := ev {
Equit => # close modules down
post(ref Event.Equit(Pscreen|Pmodem|Pkeyb|Psocket,0));
continue;
}
eva := protocol(ev);
while(len eva > 0) {
post(eva[0]);
eva = eva[1:];
}
# send message to `plumbed' modules
t.out[Mscreen].ch <- = t.out[Mscreen].ev =>
t.out[Mscreen].ev = nil;
t.out[Mmodem].ch <- = t.out[Mmodem].ev =>
t.out[Mmodem].ev = nil;
t.out[Mkeyb].ch <- = t.out[Mkeyb].ev =>
t.out[Mkeyb].ev = nil;
t.out[Msocket].ch <- = t.out[Msocket].ev =>
t.out[Msocket].ev = nil;
# recv message from Tk
cmd := <- t.cmd =>
(n, word) := sys->tokenize(cmd, " ");
if(n >0)
case hd word {
"resize" => ;
"play" => # for testing only
post(ref Event.Eproto(Pmodem, Mmodem, Cplay, "play", 0,0,0));
"keyboard" =>
if (t.kbctl == nil) {
e: string;
(e, t.kbctl) = kb(t);
if (e != nil)
sys->print("cannot start keyboard: %s\n", e);
} else
t.kbctl <- = "click";
"hangup" =>
if(T.state == Online || T.state == Connecting)
post(ref Event.Eproto(Pmodem, 0, Cdisconnect, "",0,0,0));
"buttonsleft" =>
tkcmds(t.toplevel, tkip40x25lhs);
t.buttonsleft = 1;
if(S.image != nil)
draw->(S.image.origin)(Point(0,0), Point(44, 0));
if (t.kbctl != nil)
t.kbctl <- = "fg";
"buttonsright" =>
tkcmds(t.toplevel, tkip40x25rhs);
t.buttonsleft = 0;
if(S.image != nil)
draw->(S.image.origin)(Point(0,0), Point(0, 0));
if (t.kbctl != nil)
t.kbctl <- = "fg";
"debug" =>
debug['s'] ^= 1;
debug['m'] ^= 1;
}
}
}
if (t.kbctl != nil)
t.kbctl <- = "quit";
t.kbctl = nil;
done <-= 0;
}
kb(t: ref Terminal): (string, chan of string)
{
s := chan of string;
spawn dokb(t, s);
e := <- s;
if (e != nil)
return (e, nil);
return (nil, s);
}
Terminal.setkbmode(t: self ref Terminal, tmode: int)
{
case tmode {
Videotex =>
t.kbmode = "minitel";
Mixed or Ascii =>
t.kbmode = "standard";
}
if(t.kbctl != nil) {
t.kbctl <-= "mode";
t.kbctl <-= "fg";
}
}
include "swkeyb.m";
dokb(t: ref Terminal, c: chan of string)
{
keyboard := load Keyboard Keyboard->PATH;
if (keyboard == nil) {
c <- = "cannot load keyboard";
return;
}
kbctl := chan of string;
(top, m) := tkclient->toplevel(S.ctxt, "", "Keyboard", 0);
tk->cmd(top, "pack .Wm_t -fill x");
tk->cmd(top, "update");
keyboard->chaninit(top, S.ctxt, ".keys", kbctl);
tk->cmd(top, "pack .keys");
kbctl <-= t.kbmode ;
kbon := 1;
c <- = nil; # all ok, we are now ready to accept commands
for (;;) alt {
mcmd := <- m =>
if (mcmd == "exit") {
if (kbon) {
tk->cmd(top, ". unmap; update");
kbon = 0;
}
} else
tkclient->wmctl(top, mcmd);
kbcmd := <- c =>
case kbcmd {
"fg" =>
if (kbon)
tk->cmd(top, "raise .;update");
"click" =>
if (kbon) {
tk->cmd(top, ". unmap; update");
kbon = 0;
} else {
tk->cmd(top, ". map; raise .");
kbon = 1;
}
"mode" =>
kbctl <- = t.kbmode;
"quit" =>
kbctl <- = "kill";
top = nil;
# ensure tkclient not blocked on a send to us (probably overkill!)
alt {
<- m => ;
* => ;
}
return;
}
}
}
Terminal.quit(nil: self ref Terminal)
{
}
# a minitel module sends an event to the terminal for routing
send(e: ref Event)
{
if(debug['e'] && e != nil)
fprint(stderr, "%s: -> %s\n", Modname[e.from], e.str());
T.in <- = e;
}
# post an event to one or more modules
post(e: ref Event)
{
i,l: int;
for(i=0; i<Nmodule; i++) {
# `ev' is cleared once sent, reload it from the front of `q'
b: ref BufChan = T.out[i];
l = len b.q;
if(b.ev == nil && l != 0) {
b.ev = b.q[0];
na := array [l-1] of ref Event;
na[0:] = b.q[1:];
b.q = na;
}
if (e != nil) {
if(e.path & b.path) {
if(debug['e'] > 0) {
pick de := e {
* =>
fprint(stderr, "[%s<-%s] %s\n", Modname[i], Modname[e.from], e.str());
}
}
if(b.ev == nil) # nothing queued
b.ev = e;
else { # enqueue it
l = len b.q;
na := array [l+1] of ref Event;
na[0:] = b.q[0:];
na[l] = e;
b.q = na;
}
}
}
# set a dummy channel if nothing to send
if(b.ev == nil)
b.ch = chan of ref Event;
else
b.ch = b.in;
}
}
# run the terminal protocol
protocol(ev: ref Event): array of ref Event
{
# Introduced by the following sequences, the minitel protocol can be
# embedded in any normal data sequence
# ESC,0x39,X
# ESC,0x3a,X,Y
# ESC,0x3b,X,Y,Z
# ESC,0x61 - cursor position request
ea := array [0] of ref Event; # resulting sequence of Events
changed := 0; # if set, results are found in `ea'
pick e := ev {
Edata =>
d0 := 0; # offset of start of last data sequence
p := T.proto[e.from];
for(i:=0; i<len e.data; i++) {
ch := int e.data[i];
# if(debug['p'])
# fprint(stderr, "protocol: [%s] %d %ux (%c)\n", Modname[e.from], p.state, ch, ch);
if(p.skip > 0) { # in transparency mode
if(ch == 0 && e.from == Mmodem) # 5.0
continue;
p.skip--;
continue;
}
case p.state {
PSstart =>
if(ch == ESC) {
p.state = PSesc;
changed = 1;
if(i > d0)
ea = eappend(ea, ref Event.Edata(e.path, e.from, e.data[d0:i]));
d0 = i+1;
}
PSesc =>
p.state = PSarg;
p.n = 0;
d0 = i+1;
changed = 1;
if(ch >= 16r39 && ch <= 16r3b) #PRO1,2,3
p.nargs = ch - 16r39 + 1;
else if(ch == 16r61) # cursor position request
p.nargs = 0;
else if(ch == ESC) {
ea = eappend(ea, ref Event.Edata(e.path, e.from, array [] of { byte ESC }));
p.state = PSesc;
} else {
# false alarm, restore as data
ea = eappend(ea, ref Event.Edata(e.path, e.from, array [] of { byte ESC, byte ch }));
p.state = PSstart;
}
PSarg => # expect `nargs' bytes
d0 = i+1;
changed =1;
if(p.n < p.nargs)
p.arg[p.n++] = ch;
if(p.n == p.nargs) {
# got complete protocol sequence
pe := proto(e.from, p);
if(pe != nil)
ea = eappend(ea, pe);
p.state = PSstart;
}
}
}
if(changed) { # some interpretation, results in `ea'
if(i > d0)
ea = eappend(ea, ref Event.Edata(e.path, e.from, e.data[d0:i]));
return ea;
}
ev = e;
return array [] of {ev};
}
return array [] of {ev};
}
# append to an Event array
eappend(ea: array of ref Event, e: ref Event): array of ref Event
{
l := len ea;
na := array [l+1] of ref Event;
na[0:] = ea[0:];
na[l] = e;
return na;
}
# act on a received protocol sequence
# some sequences are handled here by the terminal and result in a posted reply
# others are returned `inline' as Eproto events with the normal data stream.
proto(from: int, p: ref PState): ref Event
{
if(debug['p']) {
fprint(stderr, "PRO%d: %ux", p.nargs, p.arg[0]);
if(p.nargs > 1)
fprint(stderr, " %ux", p.arg[1]);
if(p.nargs > 2)
fprint(stderr, " %ux", p.arg[2]);
fprint(stderr, " (%s)\n", Modname[from]);
}
case p.nargs {
0 => # cursor position request ESC 0x61
reply := array [] of { byte US, byte S.pos.y, byte S.pos.x };
post(ref Event.Edata(Pmodem, from, reply));
1 =>
case p.arg[0] {
PROTOCOLSTATUS => ;
ENQROM => # identification request
post(ref Event.Edata(Pmodem, from, T.terminalid));
if(T.terminalid == TERMINALID1)
T.terminalid = TERMINALID2;
SETRAM1 or SETRAM2 => ;
FUNCTIONINGSTATUS => # 11.3
PRO2(Pmodem, from, REPFUNCTIONINGSTATUS, osb());
CONNECT => ;
DISCONNECT =>
return ref Event.Eproto(Pscreen, from, Cscreenoff, "",0,0,0);
RESET => # reset the minitel terminal
all := Pscreen|Pmodem|Pkeyb|Psocket;
post(ref Event.Eproto(all, from, Creset, "",0,0,0)); # check
T.reset();
reply := array [] of { byte SEP, byte 16r5E };
post(ref Event.Edata(Pmodem, from, reply));
}
2 =>
case p.arg[0] {
TO => # request for module status
PRO3(Pmodem, from, FROM, p.arg[1], psb(p.arg[1]));
NOBROADCAST => ;
BROADCAST => ;
TRANSPARENCY => # transparency mode - skip bytes
p.skip = p.arg[1];
if(p.skip < 1 || p.skip > 127) # 5.0
p.skip = 0;
else {
reply := array [] of { byte SEP, byte 16r57 };
post(ref Event.Edata(Pmodem, from, reply));
}
KEYBOARDSTATUS =>
if(p.arg[1] == RxKeyb)
PRO3(Pmodem, from, REPKEYBOARDSTATUS, RxKeyb, kosb());
START =>
x := osb();
if(p.arg[1] == PROCEDURE)
x |= 16r04;
if(p.arg[1] == SCROLLING)
x |= 16r02;
PRO2(Pmodem, from, REPFUNCTIONINGSTATUS, x);
case p.arg[1] {
PROCEDURE => # activate error correction procedure
sys->print("activate error correction\n");
return ref Event.Eproto(Pmodem, from, Cstartecp, "",0,0,0);
SCROLLING => # set screen to scroll
return ref Event.Eproto(Pscreen, from, Cproto, "",START,SCROLLING,0);
LOWERCASE => # set keyb to invert case
return ref Event.Eproto(Pkeyb, from, Cproto, "",START,LOWERCASE,0);
}
STOP =>
x := osb();
if(p.arg[1] == SCROLLING)
x &= ~16r02;
PRO2(Pmodem, from, REPFUNCTIONINGSTATUS, osb());
case p.arg[1] {
PROCEDURE => # deactivate error correction procedure
sys->print("deactivate error correction\n");
return ref Event.Eproto(Pmodem, from, Cstopecp, "",0,0,0);
SCROLLING => # set screen to no scroll
return ref Event.Eproto(Pscreen, from, Cproto, "",STOP,SCROLLING,0);
LOWERCASE => # set keyb to not invert case
return ref Event.Eproto(Pkeyb, from, Cproto, "",STOP,LOWERCASE,0);
}
COPY => # copy screen to socket
# not implemented
;
MIXED => # change video mode (12.1)
case p.arg[1] {
MIXED1 => # videotex -> mixed
reply := array [] of { byte SEP, byte 16r70 };
return ref Event.Eproto(Pscreen, from, Cproto, "",MIXED,MIXED1,0);
MIXED2 => # mixed -> videotex
reply := array [] of { byte SEP, byte 16r71 };
return ref Event.Eproto(Pscreen, from, Cproto, "",MIXED,MIXED2,0);
}
ASCII => # change video mode (12.2)
# TODO
;
}
3 =>
case p.arg[0] {
OFF or ON => # link, unlink, enable, disable
modcmd(p.arg[0], p.arg[1], p.arg[2]);
PRO3(Pmodem, from, FROM, p.arg[1], psb(TxCode(p.arg[1])));
START =>
case p.arg[1] {
RxKeyb => # keyboard mode
case p.arg[2] {
ETEN => # extended keyboard
K.spec |= Extend;
C0 => # cursor control key coding from col 0
K.spec |= C0keys;
}
PRO3(Pmodem, from, REPKEYBOARDSTATUS, RxKeyb, kosb());
}
STOP => # keyboard mode
case p.arg[1] {
RxKeyb => # keyboard mode
case p.arg[2] {
ETEN => # extended keyboard
K.spec &= ~Extend;
C0 => # cursor control key coding from col 0
K.spec &= ~C0keys;
}
PRO3(Pmodem, from, REPKEYBOARDSTATUS, RxKeyb, kosb());
}
}
}
return nil;
}
# post a PRO3 sequence to all modules on `path'
PRO3(path, from, x, y, z: int)
{
data := array [] of { byte ESC, byte 16r3b, byte x, byte y, byte z};
post(ref Event.Edata(path, from, data));
}
# post a PRO2 sequence to all modules on `path'
PRO2(path, from, x, y: int)
{
data := array [] of { byte ESC, byte 16r3a, byte x, byte y};
post(ref Event.Edata(path, from, data));
}
# post a PRO1 sequence to all modules on `path'
PRO1(path, from, x: int)
{
data := array [] of { byte ESC, byte 16r39, byte x};
post(ref Event.Edata(path, from, data));
}
# make or break links between modules, or enable and disable
modcmd(cmd, from, targ: int)
{
from = RxTx(from);
targ = RxTx(targ);
if(from == targ) # enable or disable module
if(cmd == ON)
Modules[from].disabled = 0;
else
Modules[from].disabled = 1;
else # modify path
if(cmd == ON)
Modules[from].path |= (1<<targ);
else
Modules[from].path &= ~(1<<targ);
}
# determine the path status byte (3.4)
# if bit 3 of `code' is set then a receive path status byte is returned
# otherwise a transmit path status byte
psb(code: int): int
{
this := RxTx(code);
b := 16r40; # bit 6 always set
if(code == RxCode(code)) { # want a receive path status byte
mask := (1<<this);
if(Modules[Mscreen].path & mask)
b |= 16r01;
if(Modules[Mkeyb].path & mask)
b |= 16r02;
if(Modules[Mmodem].path & mask)
b |= 16r04;
if(Modules[Msocket].path & mask)
b |= 16r08;
} else {
mod := Modules[this];
if(mod.path & Mscreen)
b |= 16r01;
if(mod.path & Mkeyb)
b |= 16r02;
if(mod.path & Mmodem)
b |= 16r04;
if(mod.path & Msocket)
b |= 16r08;
}
# if(parity(b))
# b ^= 16r80;
return b;
}
# convert `code' to a receive code by setting bit 3
RxCode(code: int): int
{
return (code | 16r08)&16rff;
}
# covert `code' to a send code by clearing bit 3
TxCode(code: int): int
{
return (code & ~16r08)&16rff;
}
# return 0 on even parity, 1 otherwise
# only the bottom 8 bits are considered
parity(b: int): int
{
bits := 8;
p := 0;
while(bits-- > 0) {
if(b&1)
p ^= 1;
b >>= 1;
}
return p;
}
# convert Rx or Tx code to a module code
RxTx(code: int): int
{
rv := 0;
case code {
TxScreen or RxScreen => rv = Mscreen;
TxKeyb or RxKeyb => rv = Mkeyb;
TxModem or RxModem => rv = Mmodem;
TxSocket or RxSocket => rv = Msocket;
* =>
fatal("invalid module code");
}
return rv;
}
# generate an operating status byte (11.2)
osb(): int
{
b := 16r40;
if(S.cols == 80)
b |= 16r01;
if(S.spec & Scroll)
b |= 16r02;
if(M.spec & Ecp)
b |= 16r04;
if(K.spec & Invert)
b |= 16r08;
# if(parity(b))
# b ^= 16r80;
return b;
}
# generate a keyboard operating status byte (9.1.2)
kosb(): int
{
b := 16r40;
if(K.spec & Extend)
b |= 16r01;
if(K.spec & C0keys)
b |= 16r04;
# if(parity(b))
# b ^= 16r80;
return b;
}
hex(v, n: int): string
{
return sprint("%.*ux", n, v);
}
tostr(ch: int): string
{
str := "";
str[0] = ch;
return str;
}
toint(s: string, base: int): (int, string)
{
if(base < 0 || base > 36)
return (0, s);
c := 0;
for(i := 0; i < len s; i++) {
c = s[i];
if(c != ' ' && c != '\t' && c != '\n')
break;
}
neg := 0;
if(c == '+' || c == '-') {
if(c == '-')
neg = 1;
i++;
}
ok := 0;
n := 0;
for(; i < len s; i++) {
c = s[i];
v := base;
case c {
'a' to 'z' =>
v = c - 'a' + 10;
'A' to 'Z' =>
v = c - 'A' + 10;
'0' to '9' =>
v = c - '0';
}
if(v >= base)
break;
ok = 1;
n = n * base + v;
}
if(!ok)
return (0, s);
if(neg)
n = -n;
return (n, s[i:]);
}
tolower(s: string): string
{
r := s;
for(i := 0; i < len r; i++) {
c := r[i];
if(c >= int 'A' && c <= int 'Z')
r[i] = r[i] + (int 'a' - int 'A');
}
return r;
}
# duplicate `ch' exactly `n' times
dup(ch, n: int): string
{
str := "";
for(i:=0; i<n; i++)
str[i] = ch;
return str;
}
fatal(msg: string)
{
fprint(stderr, "fatal: %s\n", msg);
exits(msg);
}
exits(s: string)
{
if(s==nil);
# raise "fail: miniterm " + s;
fd := sys->open("#p/" + string pgrp + "/ctl", sys->OWRITE);
if(fd != nil)
sys->fprint(fd, "killgrp");
exit;
}
# Minitel byte MSB and LSB classification (p.87)
MSB(ch: int): int
{
return (ch&16r70)>>4;
}
LSB(ch: int): int
{
return (ch&16r0f);
}
# Minitel character set classification (p.92)
ISC0(ch: int): int
{
msb := (ch&16r70)>>4;
return msb == 0 || msb == 1;
}
ISC1(ch: int): int
{
return ch >= 16r40 && ch <= 16r5f;
}
ISG0(ch: int): int
{
# 0x20 (space) and 0x7f (DEL) are not in G0
return ch > 16r20 && ch < 16r7f;
}
tkcmds(t: ref Tk->Toplevel, cmds: array of string)
{
n := len cmds;
for (ix := 0; ix < n; ix++)
tk->cmd(t, cmds[ix]);
}