ref: f891f91113f1aef8be3e0276231c134c53257554
dir: /builds/freetype.mk/
#
# FreeType 2 library sub-Makefile
#
# Copyright 1996-2000 by
# David Turner, Robert Wilhelm, and Werner Lemberg.
#
# This file is part of the FreeType project, and may only be used, modified,
# and distributed under the terms of the FreeType project license,
# LICENSE.TXT. By continuing to use, modify, or distribute this file you
# indicate that you have read the license and understand and accept it
# fully.
# DO NOT INVOKE THIS MAKEFILE DIRECTLY! IT IS MEANT TO BE INCLUDED BY
# OTHER MAKEFILES.
# The following variables (set by other Makefile components, in the
# environment, or on the command line) are used:
#
# BUILD The architecture dependent directory,
# e.g. `$(TOP)/builds/unix'.
#
# OBJ_DIR The directory in which object files are created.
#
# LIB_DIR The directory in which the library is created.
#
# INCLUDES A list of directories to be included additionally.
# Usually empty.
#
# CFLAGS Compilation flags. This overrides the default settings
# in the platform-specific configuration files.
#
# FTSYS_SRC If set, its value is used as the name of a replacement
# file for `src/base/ftsystem.c'.
#
# FTDEBUG_SRC If set, its value is used as the name of a replacement
# file for `src/base/ftdebug.c'. [For a normal build, this
# file does nothing.]
#
# FT_MODULE_LIST The file which contains the list of modules for the
# current build. Usually, this is automatically created by
# `modules.mk'.
#
# BASE_OBJ_S
# BASE_OBJ_M A list of base objects (for single object and multiple
# object builds, respectively). Set up in
# `src/base/rules.mk'.
#
# BASE_EXT_OBJ A list of base extension objects. Set up in
# `src/base/rules.mk'.
#
# DRV_OBJ_S
# DRV_OBJ_M A list of driver objects (for single object and multiple
# object builds, respectively). Set up cumulatively in
# `src/<driver>/rules.mk'.
#
# CLEAN
# DISTCLEAN The sub-makefiles can append additional stuff to these two
# variables which is to be removed for the `clean' resp.
# `distclean' target.
#
# TOP, SEP,
# LIBRARY, CC,
# A, I, O, T Check `config.mk' for details.
# The targets `objects' and `library' are defined at the end of this
# Makefile after all other rules have been included.
#
.PHONY: single multi objects library
# default target -- build single objects and library
#
single: objects library
# `multi' target -- build multiple objects and library
#
multi: objects library
# The FreeType source directory, usually `./src'.
#
SRC := $(TOP)$(SEP)src
# The directory where the base layer components are placed, usually
# `./src/base'.
#
BASE_DIR := $(SRC)$(SEP)base
# The build header file used to define all public header file names
# as macro.
#
ifndef FT_BUILD_H
FT_BUILD_H := $(TOP)$(SEP)include$(SEP)ft2build.h
FTBUILD_CMD :=
else
FTBUILD_CMD = $(D)FT_BUILD_H=$(FT_BUILD_H)
endif
# A few short-cuts in order to avoid typing $(SEP) all the time for the
# directory separator.
#
# For example: $(SRC_) equals to `./src/' where `.' is $(TOP).
#
#
SRC_ := $(SRC)$(SEP)
BASE_ := $(BASE_DIR)$(SEP)
OBJ_ := $(OBJ_DIR)$(SEP)
LIB_ := $(LIB_DIR)$(SEP)
PUBLIC_ := $(TOP)$(SEP)include$(SEP)freetype$(SEP)
INTERNAL_ := $(PUBLIC_)internal$(SEP)
CONFIG_ := $(PUBLIC_)config$(SEP)
CACHE_ := $(PUBLIC_)cache$(SEP)
# The final name of the library file.
#
PROJECT_LIBRARY := $(LIB_)$(LIBRARY).$A
# include paths
#
# IMPORTANT NOTE: The architecture-dependent directory must ALWAYS be placed
# in front of the include list. Porters are then able to
# put their own version of some of the FreeType components
# in the `freetype/builds/<system>' directory, as these
# files will override the default sources.
#
INCLUDES := $(BUILD) $(TOP)$(SEP)include
INCLUDE_FLAGS = $(INCLUDES:%=$I%)
# C flags used for the compilation of an object file. This must include at
# least the paths for the `base' and `builds/<system>' directories;
# debug/optimization/warning flags + ansi compliance if needed.
#
FT_CFLAGS = $(CFLAGS) $(INCLUDE_FLAGS)
FT_CC = $(CC) $(FT_CFLAGS)
FT_COMPILE = $(CC) $(ANSIFLAGS) $(FT_CFLAGS)
# Include the `modules' rules file.
#
include $(TOP)/builds/modules.mk
# Initialize the list of objects.
#
OBJECTS_LIST :=
# Define $(PUBLIC_H) as the list of all public header files located in
# `$(TOP)/include/freetype'. $(BASE_H), $(CACHE_H), and $(CONFIG_H) are
# defined similarly.
#
# This is used to simplify the dependency rules -- if one of these files
# changes, the whole library is recompiled.
#
PUBLIC_H := $(wildcard $(PUBLIC_)*.h)
BASE_H := $(wildcard $(INTERNAL_)*.h)
CONFIG_H := $(wildcard $(CONFIG_)*.h) \
$(wildcard $(BUILD)$(SEP)freetype$(SEP)config$(SEP)*.h)
CACHE_H := $(wildcard $(CACHE_)*.h)
FREETYPE_H := $(PUBLIC_H) $(BASE_H) $(CONFIG_H) $(CACHE_H)
# ftsystem component
#
ifndef FTSYS_SRC
FTSYS_SRC = $(BASE_)ftsystem.c
endif
FTSYS_OBJ = $(OBJ_)ftsystem.$O
OBJECTS_LIST += $(FTSYS_OBJ)
$(FTSYS_OBJ): $(FTSYS_SRC) $(FREETYPE_H)
$(FT_COMPILE) $T$@ $<
# ftdebug component
#
ifndef FTDEBUG_SRC
FTDEBUG_SRC = $(BASE_)ftdebug.c
endif
FTDEBUG_OBJ = $(OBJ_)ftdebug.$O
OBJECTS_LIST += $(FTDEBUG_OBJ)
$(FTDEBUG_OBJ): $(FTDEBUG_SRC) $(FREETYPE_H)
$(FT_COMPILE) $T$@ $<
# Include all rule files from FreeType components.
#
include $(wildcard $(SRC)/*/rules.mk)
# ftinit component
#
# The C source `ftinit.c' contains the FreeType initialization routines.
# It is able to automatically register one or more drivers when the API
# function FT_Init_FreeType() is called.
#
# The set of initial drivers is determined by the driver Makefiles
# includes above. Each driver Makefile updates the FTINIT_xxx lists
# which contain additional include paths and macros used to compile the
# single `ftinit.c' source.
#
FTINIT_SRC := $(BASE_)ftinit.c
FTINIT_OBJ := $(OBJ_)ftinit.$O
OBJECTS_LIST += $(FTINIT_OBJ)
$(FTINIT_OBJ): $(FTINIT_SRC) $(FREETYPE_H) $(FT_MODULE_LIST)
$(FT_COMPILE) $T$@ $<
# All FreeType library objects
#
# By default, we include the base layer extensions. These could be
# omitted on builds which do not want them.
#
OBJ_M = $(BASE_OBJ_M) $(BASE_EXT_OBJ) $(DRV_OBJS_M)
OBJ_S = $(BASE_OBJ_S) $(BASE_EXT_OBJ) $(DRV_OBJS_S)
# The target `multi' on the Make command line indicates that we want to
# compile each source file independently.
#
# Otherwise, each module/driver is compiled in a single object file through
# source file inclusion (see `src/base/ftbase.c' or
# `src/truetype/truetype.c' for examples).
#
BASE_OBJECTS := $(OBJECTS_LIST)
ifneq ($(findstring multi,$(MAKECMDGOALS)),)
OBJECTS_LIST += $(OBJ_M)
else
OBJECTS_LIST += $(OBJ_S)
endif
objects: $(OBJECTS_LIST)
library: $(PROJECT_LIBRARY)
.c.$O:
$(FT_COMPILE) $T$@ $<
.PHONY: clean_project_std distclean_project_std
# Standard cleaning and distclean rules. These are not accepted
# on all systems though.
#
clean_project_std:
-$(DELETE) $(BASE_OBJECTS) $(OBJ_M) $(OBJ_S) $(CLEAN)
distclean_project_std: clean_project_std
-$(DELETE) $(PROJECT_LIBRARY)
-$(DELETE) *.orig *~ core *.core $(DISTCLEAN)
.PHONY: clean_project_dos distclean_project_dos
# The Dos command shell does not support very long list of arguments, so
# we are stuck with wildcards.
#
# Don't break the command lines with; this prevents the "del" command from
# working correctly on Win9x.
#
clean_project_dos:
-$(DELETE) $(subst $(SEP),$(HOSTSEP),$(OBJ_))*.$O $(CLEAN) $(NO_OUTPUT)
distclean_project_dos: clean_project_dos
-$(DELETE) $(subst $(SEP),$(HOSTSEP),$(PROJECT_LIBRARY)) $(DISTCLEAN) $(NO_OUTPUT)
.PHONY: remove_config_mk
# Remove configuration file (used for distclean).
#
remove_config_mk:
-$(DELETE) $(subst $(SEP),$(HOSTSEP),$(CONFIG_MK)) $(NO_OUTPUT)
.PHONY: clean distclean
# The `config.mk' file must define `clean_freetype' and
# `distclean_freetype'. Implementations may use to relay these to either
# the `std' or `dos' versions from above, or simply provide their own
# implementation.
#
clean: clean_project
distclean: distclean_project remove_config_mk
# EOF