ref: be67c4ef33a610afc475e62fc2fd69b96cd4d845
dir: /src/autohint/ahglyph.c/
/***************************************************************************/
/* */
/* ahglyph.c */
/* */
/* Routines used to load and analyze a given glyph before hinting */
/* (body). */
/* */
/* Copyright 2000-2001, 2002, 2003 Catharon Productions Inc. */
/* Author: David Turner */
/* */
/* This file is part of the Catharon Typography Project and shall only */
/* be used, modified, and distributed under the terms of the Catharon */
/* Open Source License that should come with this file under the name */
/* `CatharonLicense.txt'. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/* Note that this license is compatible with the FreeType license. */
/* */
/***************************************************************************/
#include <ft2build.h>
#include "ahglyph.h"
#include "ahangles.h"
#include "ahglobal.h"
#include "aherrors.h"
#ifdef AH_DEBUG
#include <stdio.h>
void
ah_dump_edges( AH_Outline outline )
{
AH_Edge edges;
AH_Edge edge_limit;
AH_Segment segments;
FT_Int dimension;
edges = outline->horz_edges;
edge_limit = edges + outline->num_hedges;
segments = outline->horz_segments;
for ( dimension = 1; dimension >= 0; dimension-- )
{
AH_Edge edge;
printf ( "Table of %s edges:\n",
!dimension ? "vertical" : "horizontal" );
printf ( " [ index | pos | dir | link |"
" serif | blue | opos | pos ]\n" );
for ( edge = edges; edge < edge_limit; edge++ )
{
printf ( " [ %5d | %4d | %5s | %4d | %5d | %c | %5.2f | %5.2f ]\n",
edge - edges,
(int)edge->fpos,
edge->dir == AH_DIR_UP
? "up"
: ( edge->dir == AH_DIR_DOWN
? "down"
: ( edge->dir == AH_DIR_LEFT
? "left"
: ( edge->dir == AH_DIR_RIGHT
? "right"
: "none" ) ) ),
edge->link ? ( edge->link - edges ) : -1,
edge->serif ? ( edge->serif - edges ) : -1,
edge->blue_edge ? 'y' : 'n',
edge->opos / 64.0,
edge->pos / 64.0 );
}
edges = outline->vert_edges;
edge_limit = edges + outline->num_vedges;
segments = outline->vert_segments;
}
}
/* A function used to dump the array of linked segments */
void
ah_dump_segments( AH_Outline outline )
{
AH_Segment segments;
AH_Segment segment_limit;
AH_Point points;
FT_Int dimension;
points = outline->points;
segments = outline->horz_segments;
segment_limit = segments + outline->num_hsegments;
for ( dimension = 1; dimension >= 0; dimension-- )
{
AH_Segment seg;
printf ( "Table of %s segments:\n",
!dimension ? "vertical" : "horizontal" );
printf ( " [ index | pos | dir | link | serif |"
" numl | first | start ]\n" );
for ( seg = segments; seg < segment_limit; seg++ )
{
printf ( " [ %5d | %4d | %5s | %4d | %5d | %4d | %5d | %5d ]\n",
seg - segments,
(int)seg->pos,
seg->dir == AH_DIR_UP
? "up"
: ( seg->dir == AH_DIR_DOWN
? "down"
: ( seg->dir == AH_DIR_LEFT
? "left"
: ( seg->dir == AH_DIR_RIGHT
? "right"
: "none" ) ) ),
seg->link ? ( seg->link - segments ) : -1,
seg->serif ? ( seg->serif - segments ) : -1,
(int)seg->num_linked,
seg->first - points,
seg->last - points );
}
segments = outline->vert_segments;
segment_limit = segments + outline->num_vsegments;
}
}
#endif /* AH_DEBUG */
/* compute the direction value of a given vector */
static AH_Direction
ah_compute_direction( FT_Pos dx,
FT_Pos dy )
{
AH_Direction dir;
FT_Pos ax = ABS( dx );
FT_Pos ay = ABS( dy );
dir = AH_DIR_NONE;
/* atan(1/12) == 4.7 degrees */
/* test for vertical direction */
if ( ax * 12 < ay )
{
dir = dy > 0 ? AH_DIR_UP : AH_DIR_DOWN;
}
/* test for horizontal direction */
else if ( ay * 12 < ax )
{
dir = dx > 0 ? AH_DIR_RIGHT : AH_DIR_LEFT;
}
return dir;
}
/* this function is used by ah_get_orientation (see below) to test */
/* the fill direction of given bbox extremum */
static FT_Int
ah_test_extremum( FT_Outline* outline,
FT_Int n )
{
FT_Vector *prev, *cur, *next;
FT_Pos product;
FT_Int first, last, c;
FT_Int retval;
/* we need to compute the `previous' and `next' point */
/* for this extremum; we check whether the extremum */
/* is start or end of a contour and providing */
/* appropriate values if so */
cur = outline->points + n;
prev = cur - 1;
next = cur + 1;
first = 0;
for ( c = 0; c < outline->n_contours; c++ )
{
last = outline->contours[c];
if ( n == first )
prev = outline->points + last;
if ( n == last )
next = outline->points + first;
first = last + 1;
}
/* compute the vectorial product -- since we know that the angle */
/* is <= 180 degrees (otherwise it wouldn't be an extremum) we */
/* can determine the filling orientation if the product is */
/* either positive or negative */
product = FT_MulDiv( cur->x - prev->x, /* in.x */
next->y - cur->y, /* out.y */
0x40 )
-
FT_MulDiv( cur->y - prev->y, /* in.y */
next->x - cur->x, /* out.x */
0x40 );
retval = 0;
if ( product )
retval = product > 0 ? 2 : 1;
return retval;
}
/* Compute the orientation of path filling. It differs between TrueType */
/* and Type1 formats. We could use the `FT_OUTLINE_REVERSE_FILL' flag, */
/* but it is better to re-compute it directly (it seems that this flag */
/* isn't correctly set for some weird composite glyphs currently). */
/* */
/* We do this by computing bounding box points, and computing their */
/* curvature. */
/* */
/* The function returns either 1 or 2. */
/* */
static FT_Int
ah_get_orientation( FT_Outline* outline )
{
FT_BBox box;
FT_Int indices_xMin, indices_yMin, indices_xMax, indices_yMax;
FT_Int n, last;
indices_xMin = -1;
indices_yMin = -1;
indices_xMax = -1;
indices_yMax = -1;
box.xMin = box.yMin = 32767L;
box.xMax = box.yMax = -32768L;
/* is it empty? */
if ( outline->n_contours < 1 )
return 1;
last = outline->contours[outline->n_contours - 1];
for ( n = 0; n <= last; n++ )
{
FT_Pos x, y;
x = outline->points[n].x;
if ( x < box.xMin )
{
box.xMin = x;
indices_xMin = n;
}
if ( x > box.xMax )
{
box.xMax = x;
indices_xMax = n;
}
y = outline->points[n].y;
if ( y < box.yMin )
{
box.yMin = y;
indices_yMin = n;
}
if ( y > box.yMax )
{
box.yMax = y;
indices_yMax = n;
}
}
/* test orientation of the extrema */
n = ah_test_extremum( outline, indices_xMin );
if ( n )
goto Exit;
n = ah_test_extremum( outline, indices_yMin );
if ( n )
goto Exit;
n = ah_test_extremum( outline, indices_xMax );
if ( n )
goto Exit;
n = ah_test_extremum( outline, indices_yMax );
if ( !n )
n = 1;
Exit:
return n;
}
/*************************************************************************/
/* */
/* <Function> */
/* ah_outline_new */
/* */
/* <Description> */
/* Creates a new and empty AH_OutlineRec object. */
/* */
FT_LOCAL_DEF( FT_Error )
ah_outline_new( FT_Memory memory,
AH_Outline* aoutline )
{
FT_Error error;
AH_Outline outline;
if ( !FT_NEW( outline ) )
{
outline->memory = memory;
*aoutline = outline;
}
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* ah_outline_done */
/* */
/* <Description> */
/* Destroys a given AH_OutlineRec object. */
/* */
FT_LOCAL_DEF( void )
ah_outline_done( AH_Outline outline )
{
FT_Memory memory = outline->memory;
FT_FREE( outline->horz_edges );
FT_FREE( outline->horz_segments );
FT_FREE( outline->contours );
FT_FREE( outline->points );
FT_FREE( outline );
}
/*************************************************************************/
/* */
/* <Function> */
/* ah_outline_save */
/* */
/* <Description> */
/* Saves the contents of a given AH_OutlineRec object into a face's */
/* glyph slot. */
/* */
FT_LOCAL_DEF( void )
ah_outline_save( AH_Outline outline,
AH_Loader gloader )
{
AH_Point point = outline->points;
AH_Point point_limit = point + outline->num_points;
FT_Vector* vec = gloader->current.outline.points;
char* tag = gloader->current.outline.tags;
/* we assume that the glyph loader has already been checked for storage */
for ( ; point < point_limit; point++, vec++, tag++ )
{
vec->x = point->x;
vec->y = point->y;
if ( point->flags & AH_FLAG_CONIC )
tag[0] = FT_CURVE_TAG_CONIC;
else if ( point->flags & AH_FLAG_CUBIC )
tag[0] = FT_CURVE_TAG_CUBIC;
else
tag[0] = FT_CURVE_TAG_ON;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* ah_outline_load */
/* */
/* <Description> */
/* Loads an unscaled outline from a glyph slot into an AH_OutlineRec */
/* object. */
/* */
FT_LOCAL_DEF( FT_Error )
ah_outline_load( AH_Outline outline,
FT_Fixed x_scale,
FT_Fixed y_scale,
FT_Face face )
{
FT_Memory memory = outline->memory;
FT_Error error = AH_Err_Ok;
FT_Outline* source = &face->glyph->outline;
FT_Int num_points = source->n_points;
FT_Int num_contours = source->n_contours;
AH_Point points;
/* check arguments */
if ( !face ||
!face->size ||
face->glyph->format != FT_GLYPH_FORMAT_OUTLINE )
return AH_Err_Invalid_Argument;
/* first of all, reallocate the contours array if necessary */
if ( num_contours > outline->max_contours )
{
FT_Int new_contours = ( num_contours + 3 ) & -4;
if ( FT_RENEW_ARRAY( outline->contours,
outline->max_contours,
new_contours ) )
goto Exit;
outline->max_contours = new_contours;
}
/* then, reallocate the points, segments & edges arrays if needed -- */
/* note that we reserved two additional point positions, used to */
/* hint metrics appropriately */
/* */
if ( num_points + 2 > outline->max_points )
{
FT_Int news = ( num_points + 2 + 7 ) & -8;
FT_Int max = outline->max_points;
if ( FT_RENEW_ARRAY( outline->points, max, news ) ||
FT_RENEW_ARRAY( outline->horz_edges, max * 2, news * 2 ) ||
FT_RENEW_ARRAY( outline->horz_segments, max * 2, news * 2 ) )
goto Exit;
/* readjust some pointers */
outline->vert_edges = outline->horz_edges + news;
outline->vert_segments = outline->horz_segments + news;
outline->max_points = news;
}
outline->num_points = num_points;
outline->num_contours = num_contours;
outline->num_hedges = 0;
outline->num_vedges = 0;
outline->num_hsegments = 0;
outline->num_vsegments = 0;
/* We can't rely on the value of `FT_Outline.flags' to know the fill */
/* direction used for a glyph, given that some fonts are broken (e.g. */
/* the Arphic ones). We thus recompute it each time we need to. */
/* */
outline->vert_major_dir = AH_DIR_UP;
outline->horz_major_dir = AH_DIR_LEFT;
if ( ah_get_orientation( source ) > 1 )
{
outline->vert_major_dir = AH_DIR_DOWN;
outline->horz_major_dir = AH_DIR_RIGHT;
}
outline->x_scale = x_scale;
outline->y_scale = y_scale;
points = outline->points;
if ( outline->num_points == 0 )
goto Exit;
{
/* do one thing at a time -- it is easier to understand, and */
/* the code is clearer */
AH_Point point;
AH_Point point_limit = points + outline->num_points;
/* compute coordinates */
{
FT_Vector* vec = source->points;
for ( point = points; point < point_limit; vec++, point++ )
{
point->fx = vec->x;
point->fy = vec->y;
point->ox = point->x = FT_MulFix( vec->x, x_scale );
point->oy = point->y = FT_MulFix( vec->y, y_scale );
point->flags = 0;
}
}
/* compute Bezier flags */
{
char* tag = source->tags;
for ( point = points; point < point_limit; point++, tag++ )
{
switch ( FT_CURVE_TAG( *tag ) )
{
case FT_CURVE_TAG_CONIC:
point->flags = AH_FLAG_CONIC;
break;
case FT_CURVE_TAG_CUBIC:
point->flags = AH_FLAG_CUBIC;
break;
default:
;
}
}
}
/* compute `next' and `prev' */
{
FT_Int contour_index;
AH_Point prev;
AH_Point first;
AH_Point end;
contour_index = 0;
first = points;
end = points + source->contours[0];
prev = end;
for ( point = points; point < point_limit; point++ )
{
point->prev = prev;
if ( point < end )
{
point->next = point + 1;
prev = point;
}
else
{
point->next = first;
contour_index++;
if ( point + 1 < point_limit )
{
end = points + source->contours[contour_index];
first = point + 1;
prev = end;
}
}
}
}
/* set-up the contours array */
{
AH_Point* contour = outline->contours;
AH_Point* contour_limit = contour + outline->num_contours;
short* end = source->contours;
short idx = 0;
for ( ; contour < contour_limit; contour++, end++ )
{
contour[0] = points + idx;
idx = (short)( end[0] + 1 );
}
}
/* compute directions of in & out vectors */
{
for ( point = points; point < point_limit; point++ )
{
AH_Point prev;
AH_Point next;
FT_Vector ivec, ovec;
prev = point->prev;
ivec.x = point->fx - prev->fx;
ivec.y = point->fy - prev->fy;
point->in_dir = ah_compute_direction( ivec.x, ivec.y );
next = point->next;
ovec.x = next->fx - point->fx;
ovec.y = next->fy - point->fy;
point->out_dir = ah_compute_direction( ovec.x, ovec.y );
#ifndef AH_OPTION_NO_WEAK_INTERPOLATION
if ( point->flags & ( AH_FLAG_CONIC | AH_FLAG_CUBIC ) )
{
Is_Weak_Point:
point->flags |= AH_FLAG_WEAK_INTERPOLATION;
}
else if ( point->out_dir == point->in_dir )
{
AH_Angle angle_in, angle_out, delta;
if ( point->out_dir != AH_DIR_NONE )
goto Is_Weak_Point;
angle_in = ah_angle( &ivec );
angle_out = ah_angle( &ovec );
delta = angle_in - angle_out;
if ( delta > AH_PI )
delta = AH_2PI - delta;
if ( delta < 0 )
delta = -delta;
if ( delta < 2 )
goto Is_Weak_Point;
}
else if ( point->in_dir == -point->out_dir )
goto Is_Weak_Point;
#endif
}
}
}
Exit:
return error;
}
FT_LOCAL_DEF( void )
ah_setup_uv( AH_Outline outline,
AH_UV source )
{
AH_Point point = outline->points;
AH_Point point_limit = point + outline->num_points;
switch ( source )
{
case AH_UV_FXY:
for ( ; point < point_limit; point++ )
{
point->u = point->fx;
point->v = point->fy;
}
break;
case AH_UV_FYX:
for ( ; point < point_limit; point++ )
{
point->u = point->fy;
point->v = point->fx;
}
break;
case AH_UV_OXY:
for ( ; point < point_limit; point++ )
{
point->u = point->ox;
point->v = point->oy;
}
break;
case AH_UV_OYX:
for ( ; point < point_limit; point++ )
{
point->u = point->oy;
point->v = point->ox;
}
break;
case AH_UV_YX:
for ( ; point < point_limit; point++ )
{
point->u = point->y;
point->v = point->x;
}
break;
case AH_UV_OX:
for ( ; point < point_limit; point++ )
{
point->u = point->x;
point->v = point->ox;
}
break;
case AH_UV_OY:
for ( ; point < point_limit; point++ )
{
point->u = point->y;
point->v = point->oy;
}
break;
default:
for ( ; point < point_limit; point++ )
{
point->u = point->x;
point->v = point->y;
}
}
}
/* compute all inflex points in a given glyph */
static void
ah_outline_compute_inflections( AH_Outline outline )
{
AH_Point* contour = outline->contours;
AH_Point* contour_limit = contour + outline->num_contours;
/* load original coordinates in (u,v) */
ah_setup_uv( outline, AH_UV_FXY );
/* do each contour separately */
for ( ; contour < contour_limit; contour++ )
{
FT_Vector vec;
AH_Point point = contour[0];
AH_Point first = point;
AH_Point start = point;
AH_Point end = point;
AH_Point before;
AH_Point after;
AH_Angle angle_in, angle_seg, angle_out;
AH_Angle diff_in, diff_out;
FT_Int finished = 0;
/* compute first segment in contour */
first = point;
start = end = first;
do
{
end = end->next;
if ( end == first )
goto Skip;
} while ( end->u == first->u && end->v == first->v );
vec.x = end->u - start->u;
vec.y = end->v - start->v;
angle_seg = ah_angle( &vec );
/* extend the segment start whenever possible */
before = start;
do
{
do
{
start = before;
before = before->prev;
if ( before == first )
goto Skip;
} while ( before->u == start->u && before->v == start->v );
vec.x = start->u - before->u;
vec.y = start->v - before->v;
angle_in = ah_angle( &vec );
} while ( angle_in == angle_seg );
first = start;
diff_in = ah_angle_diff( angle_in, angle_seg );
/* now, process all segments in the contour */
do
{
/* first, extend current segment's end whenever possible */
after = end;
do
{
do
{
end = after;
after = after->next;
if ( after == first )
finished = 1;
} while ( end->u == after->u && end->v == after->v );
vec.x = after->u - end->u;
vec.y = after->v - end->v;
angle_out = ah_angle( &vec );
} while ( angle_out == angle_seg );
diff_out = ah_angle_diff( angle_seg, angle_out );
if ( ( diff_in ^ diff_out ) < 0 )
{
/* diff_in and diff_out have different signs, we have */
/* inflection points here... */
do
{
start->flags |= AH_FLAG_INFLECTION;
start = start->next;
} while ( start != end );
start->flags |= AH_FLAG_INFLECTION;
}
start = end;
end = after;
angle_seg = angle_out;
diff_in = diff_out;
} while ( !finished );
Skip:
;
}
}
FT_LOCAL_DEF( void )
ah_outline_compute_segments( AH_Outline outline )
{
int dimension;
AH_Segment segments;
FT_Int* p_num_segments;
AH_Direction segment_dir;
AH_Direction major_dir;
segments = outline->horz_segments;
p_num_segments = &outline->num_hsegments;
major_dir = AH_DIR_RIGHT; /* This value must be positive! */
segment_dir = major_dir;
/* set up (u,v) in each point */
ah_setup_uv( outline, AH_UV_FYX );
for ( dimension = 1; dimension >= 0; dimension-- )
{
AH_Point* contour = outline->contours;
AH_Point* contour_limit = contour + outline->num_contours;
AH_Segment segment = segments;
FT_Int num_segments = 0;
#ifdef AH_HINT_METRICS
AH_Point min_point = 0;
AH_Point max_point = 0;
FT_Pos min_coord = 32000;
FT_Pos max_coord = -32000;
#endif
/* do each contour separately */
for ( ; contour < contour_limit; contour++ )
{
AH_Point point = contour[0];
AH_Point last = point->prev;
int on_edge = 0;
FT_Pos min_pos = 32000; /* minimum segment pos != min_coord */
FT_Pos max_pos = -32000; /* maximum segment pos != max_coord */
FT_Bool passed;
#ifdef AH_HINT_METRICS
if ( point->u < min_coord )
{
min_coord = point->u;
min_point = point;
}
if ( point->u > max_coord )
{
max_coord = point->u;
max_point = point;
}
#endif
if ( point == last ) /* skip singletons -- just in case */
continue;
if ( ABS( last->out_dir ) == major_dir &&
ABS( point->out_dir ) == major_dir )
{
/* we are already on an edge, try to locate its start */
last = point;
for (;;)
{
point = point->prev;
if ( ABS( point->out_dir ) != major_dir )
{
point = point->next;
break;
}
if ( point == last )
break;
}
}
last = point;
passed = 0;
for (;;)
{
FT_Pos u, v;
if ( on_edge )
{
u = point->u;
if ( u < min_pos )
min_pos = u;
if ( u > max_pos )
max_pos = u;
if ( point->out_dir != segment_dir || point == last )
{
/* we are just leaving an edge; record a new segment! */
segment->last = point;
segment->pos = ( min_pos + max_pos ) >> 1;
/* a segment is round if either its first or last point */
/* is a control point */
if ( ( segment->first->flags | point->flags ) &
AH_FLAG_CONTROL )
segment->flags |= AH_EDGE_ROUND;
/* compute segment size */
min_pos = max_pos = point->v;
v = segment->first->v;
if ( v < min_pos )
min_pos = v;
if ( v > max_pos )
max_pos = v;
segment->min_coord = min_pos;
segment->max_coord = max_pos;
on_edge = 0;
num_segments++;
segment++;
/* fallthrough */
}
}
/* now exit if we are at the start/end point */
if ( point == last )
{
if ( passed )
break;
passed = 1;
}
if ( !on_edge && ABS( point->out_dir ) == major_dir )
{
/* this is the start of a new segment! */
segment_dir = point->out_dir;
/* clear all segment fields */
FT_ZERO( segment );
segment->dir = segment_dir;
segment->flags = AH_EDGE_NORMAL;
min_pos = max_pos = point->u;
segment->first = point;
segment->last = point;
segment->contour = contour;
segment->score = 32000;
segment->link = NULL;
on_edge = 1;
#ifdef AH_HINT_METRICS
if ( point == max_point )
max_point = 0;
if ( point == min_point )
min_point = 0;
#endif
}
point = point->next;
}
} /* contours */
#ifdef AH_HINT_METRICS
/* we need to ensure that there are edges on the left-most and */
/* right-most points of the glyph in order to hint the metrics; */
/* we do this by inserting fake segments when needed */
if ( dimension == 0 )
{
AH_Point point = outline->points;
AH_Point point_limit = point + outline->num_points;
FT_Pos min_pos = 32000;
FT_Pos max_pos = -32000;
min_point = 0;
max_point = 0;
/* compute minimum and maximum points */
for ( ; point < point_limit; point++ )
{
FT_Pos x = point->fx;
if ( x < min_pos )
{
min_pos = x;
min_point = point;
}
if ( x > max_pos )
{
max_pos = x;
max_point = point;
}
}
/* insert minimum segment */
if ( min_point )
{
/* clear all segment fields */
FT_ZERO( segment );
segment->dir = segment_dir;
segment->flags = AH_EDGE_NORMAL;
segment->first = min_point;
segment->last = min_point;
segment->pos = min_pos;
segment->score = 32000;
segment->link = NULL;
num_segments++;
segment++;
}
/* insert maximum segment */
if ( max_point )
{
/* clear all segment fields */
FT_ZERO( segment );
segment->dir = segment_dir;
segment->flags = AH_EDGE_NORMAL;
segment->first = max_point;
segment->last = max_point;
segment->pos = max_pos;
segment->score = 32000;
segment->link = NULL;
num_segments++;
segment++;
}
}
#endif /* AH_HINT_METRICS */
*p_num_segments = num_segments;
segments = outline->vert_segments;
major_dir = AH_DIR_UP;
p_num_segments = &outline->num_vsegments;
ah_setup_uv( outline, AH_UV_FXY );
}
}
FT_LOCAL_DEF( void )
ah_outline_link_segments( AH_Outline outline )
{
AH_Segment segments;
AH_Segment segment_limit;
AH_Direction major_dir;
int dimension;
segments = outline->horz_segments;
segment_limit = segments + outline->num_hsegments;
major_dir = outline->horz_major_dir;
for ( dimension = 1; dimension >= 0; dimension-- )
{
AH_Segment seg1;
AH_Segment seg2;
#if 0
/* now compare each segment to the others */
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
FT_Pos best_score;
AH_Segment best_segment;
/* the fake segments are introduced to hint the metrics -- */
/* we must never link them to anything */
if ( seg1->first == seg1->last )
continue;
best_segment = seg1->link;
if ( best_segment )
best_score = seg1->score;
else
best_score = +32000;
for ( seg2 = segments; seg2 < segment_limit; seg2++ )
if ( seg1 != seg2 && seg1->dir + seg2->dir == 0 )
{
FT_Pos pos1 = seg1->pos;
FT_Pos pos2 = seg2->pos;
FT_Bool is_dir;
FT_Bool is_pos;
/* check that the segments are correctly oriented and */
/* positioned to form a black distance */
is_dir = (FT_Bool)( seg1->dir == outline->horz_major_dir ||
seg1->dir == outline->vert_major_dir );
is_pos = (FT_Bool)( pos1 > pos2 );
if ( pos1 == pos2 || !(is_dir ^ is_pos) )
continue;
{
FT_Pos min = seg1->min_coord;
FT_Pos max = seg1->max_coord;
FT_Pos len, dist, score;
if ( min < seg2->min_coord )
min = seg2->min_coord;
if ( max > seg2->max_coord )
max = seg2->max_coord;
len = max - min;
if ( len >= 8 )
{
dist = seg2->pos - seg1->pos;
if ( dist < 0 )
dist = -dist;
score = dist + 3000 / len;
if ( score < best_score )
{
best_score = score;
best_segment = seg2;
}
}
}
}
if ( best_segment )
{
seg1->link = best_segment;
seg1->score = best_score;
best_segment->num_linked++;
}
}
#endif /* 0 */
#if 1
/* the following code does the same, but much faster! */
/* now compare each segment to the others */
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
/* the fake segments are introduced to hint the metrics -- */
/* we must never link them to anything */
if ( seg1->first == seg1->last || seg1->dir != major_dir )
continue;
for ( seg2 = segments; seg2 < segment_limit; seg2++ )
if ( seg2 != seg1 && seg1->dir + seg2->dir == 0 )
{
FT_Pos pos1 = seg1->pos;
FT_Pos pos2 = seg2->pos;
FT_Pos dist = pos2 - pos1;
if ( dist < 0 )
continue;
{
FT_Pos min = seg1->min_coord;
FT_Pos max = seg1->max_coord;
FT_Pos len, score;
if ( min < seg2->min_coord )
min = seg2->min_coord;
if ( max > seg2->max_coord )
max = seg2->max_coord;
len = max - min;
if ( len >= 8 )
{
score = dist + 3000 / len;
if ( score < seg1->score )
{
seg1->score = score;
seg1->link = seg2;
}
if ( score < seg2->score )
{
seg2->score = score;
seg2->link = seg1;
}
}
}
}
}
#endif /* 1 */
/* now, compute the `serif' segments */
for ( seg1 = segments; seg1 < segment_limit; seg1++ )
{
seg2 = seg1->link;
if ( seg2 )
{
seg2->num_linked++;
if ( seg2->link != seg1 )
{
seg1->link = 0;
seg1->serif = seg2->link;
}
}
}
segments = outline->vert_segments;
segment_limit = segments + outline->num_vsegments;
major_dir = outline->vert_major_dir;
}
}
static void
ah_outline_compute_edges( AH_Outline outline )
{
AH_Edge edges;
AH_Segment segments;
AH_Segment segment_limit;
AH_Direction up_dir;
FT_Int* p_num_edges;
FT_Int dimension;
FT_Fixed scale;
FT_Pos edge_distance_threshold;
edges = outline->horz_edges;
segments = outline->horz_segments;
segment_limit = segments + outline->num_hsegments;
p_num_edges = &outline->num_hedges;
up_dir = AH_DIR_RIGHT;
scale = outline->y_scale;
for ( dimension = 1; dimension >= 0; dimension-- )
{
AH_Edge edge;
AH_Edge edge_limit; /* really == edge + num_edges */
AH_Segment seg;
/*********************************************************************/
/* */
/* We will begin by generating a sorted table of edges for the */
/* current direction. To do so, we simply scan each segment and try */
/* to find an edge in our table that corresponds to its position. */
/* */
/* If no edge is found, we create and insert a new edge in the */
/* sorted table. Otherwise, we simply add the segment to the edge's */
/* list which will be processed in the second step to compute the */
/* edge's properties. */
/* */
/* Note that the edges table is sorted along the segment/edge */
/* position. */
/* */
/*********************************************************************/
edge_distance_threshold = FT_MulFix( outline->edge_distance_threshold,
scale );
if ( edge_distance_threshold > 64 / 4 )
edge_distance_threshold = 64 / 4;
edge_distance_threshold = FT_DivFix( edge_distance_threshold,
scale );
edge_limit = edges;
for ( seg = segments; seg < segment_limit; seg++ )
{
AH_Edge found = 0;
/* look for an edge corresponding to the segment */
for ( edge = edges; edge < edge_limit; edge++ )
{
FT_Pos dist;
dist = seg->pos - edge->fpos;
if ( dist < 0 )
dist = -dist;
if ( dist < edge_distance_threshold )
{
found = edge;
break;
}
}
if ( !found )
{
/* insert a new edge in the list and */
/* sort according to the position */
while ( edge > edges && edge[-1].fpos > seg->pos )
{
edge[0] = edge[-1];
edge--;
}
edge_limit++;
/* clear all edge fields */
FT_MEM_ZERO( edge, sizeof ( *edge ) );
/* add the segment to the new edge's list */
edge->first = seg;
edge->last = seg;
edge->fpos = seg->pos;
edge->opos = edge->pos = FT_MulFix( seg->pos, scale );
seg->edge_next = seg;
}
else
{
/* if an edge was found, simply add the segment to the edge's */
/* list */
seg->edge_next = edge->first;
edge->last->edge_next = seg;
edge->last = seg;
}
}
*p_num_edges = (FT_Int)( edge_limit - edges );
/*********************************************************************/
/* */
/* Good, we will now compute each edge's properties according to */
/* segments found on its position. Basically, these are: */
/* */
/* - edge's main direction */
/* - stem edge, serif edge or both (which defaults to stem then) */
/* - rounded edge, straight or both (which defaults to straight) */
/* - link for edge */
/* */
/*********************************************************************/
/* first of all, set the `edge' field in each segment -- this is */
/* required in order to compute edge links */
/* Note that I've tried to remove this loop, setting
* the "edge" field of each segment directly in the
* code above. For some reason, it slows down execution
* speed -- on a Sun.
*/
for ( edge = edges; edge < edge_limit; edge++ )
{
seg = edge->first;
if ( seg )
do
{
seg->edge = edge;
seg = seg->edge_next;
}
while ( seg != edge->first );
}
/* now, compute each edge properties */
for ( edge = edges; edge < edge_limit; edge++ )
{
FT_Int is_round = 0; /* does it contain round segments? */
FT_Int is_straight = 0; /* does it contain straight segments? */
FT_Pos ups = 0; /* number of upwards segments */
FT_Pos downs = 0; /* number of downwards segments */
seg = edge->first;
do
{
FT_Bool is_serif;
/* check for roundness of segment */
if ( seg->flags & AH_EDGE_ROUND )
is_round++;
else
is_straight++;
/* check for segment direction */
if ( seg->dir == up_dir )
ups += seg->max_coord-seg->min_coord;
else
downs += seg->max_coord-seg->min_coord;
/* check for links -- if seg->serif is set, then seg->link must */
/* be ignored */
is_serif = (FT_Bool)( seg->serif && seg->serif->edge != edge );
if ( seg->link || is_serif )
{
AH_Edge edge2;
AH_Segment seg2;
edge2 = edge->link;
seg2 = seg->link;
if ( is_serif )
{
seg2 = seg->serif;
edge2 = edge->serif;
}
if ( edge2 )
{
FT_Pos edge_delta;
FT_Pos seg_delta;
edge_delta = edge->fpos - edge2->fpos;
if ( edge_delta < 0 )
edge_delta = -edge_delta;
seg_delta = seg->pos - seg2->pos;
if ( seg_delta < 0 )
seg_delta = -seg_delta;
if ( seg_delta < edge_delta )
edge2 = seg2->edge;
}
else
edge2 = seg2->edge;
#ifdef FT_CONFIG_CHESTER_SERIF
if ( is_serif )
{
edge->serif = edge2;
edge2->flags |= AH_EDGE_SERIF;
}
else
edge->link = edge2;
#else /* !FT_CONFIG_CHESTER_SERIF */
if ( is_serif )
edge->serif = edge2;
else
edge->link = edge2;
#endif /* !FT_CONFIG_CHESTER_SERIF */
}
seg = seg->edge_next;
} while ( seg != edge->first );
/* set the round/straight flags */
edge->flags = AH_EDGE_NORMAL;
if ( is_round > 0 && is_round >= is_straight )
edge->flags |= AH_EDGE_ROUND;
/* set the edge's main direction */
edge->dir = AH_DIR_NONE;
if ( ups > downs )
edge->dir = up_dir;
else if ( ups < downs )
edge->dir = -up_dir;
else if ( ups == downs )
edge->dir = 0; /* both up and down! */
/* gets rid of serifs if link is set */
/* XXX: This gets rid of many unpleasant artefacts! */
/* Example: the `c' in cour.pfa at size 13 */
if ( edge->serif && edge->link )
edge->serif = 0;
}
edges = outline->vert_edges;
segments = outline->vert_segments;
segment_limit = segments + outline->num_vsegments;
p_num_edges = &outline->num_vedges;
up_dir = AH_DIR_UP;
scale = outline->x_scale;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* ah_outline_detect_features */
/* */
/* <Description> */
/* Performs feature detection on a given AH_OutlineRec object. */
/* */
FT_LOCAL_DEF( void )
ah_outline_detect_features( AH_Outline outline )
{
ah_outline_compute_segments ( outline );
ah_outline_link_segments ( outline );
ah_outline_compute_edges ( outline );
ah_outline_compute_inflections( outline );
}
/*************************************************************************/
/* */
/* <Function> */
/* ah_outline_compute_blue_edges */
/* */
/* <Description> */
/* Computes the `blue edges' in a given outline (i.e. those that must */
/* be snapped to a blue zone edge (top or bottom). */
/* */
FT_LOCAL_DEF( void )
ah_outline_compute_blue_edges( AH_Outline outline,
AH_Face_Globals face_globals )
{
AH_Edge edge = outline->horz_edges;
AH_Edge edge_limit = edge + outline->num_hedges;
AH_Globals globals = &face_globals->design;
FT_Fixed y_scale = outline->y_scale;
FT_Bool blue_active[AH_BLUE_MAX];
/* compute which blue zones are active, i.e. have their scaled */
/* size < 3/4 pixels */
{
AH_Blue blue;
FT_Bool check = 0;
for ( blue = AH_BLUE_CAPITAL_TOP; blue < AH_BLUE_MAX; blue++ )
{
FT_Pos ref, shoot, dist;
ref = globals->blue_refs[blue];
shoot = globals->blue_shoots[blue];
dist = ref - shoot;
if ( dist < 0 )
dist = -dist;
blue_active[blue] = 0;
if ( FT_MulFix( dist, y_scale ) < 48 )
{
blue_active[blue] = 1;
check = 1;
}
}
/* return immediately if no blue zone is active */
if ( !check )
return;
}
/* for each horizontal edge search the blue zone which is closest */
for ( ; edge < edge_limit; edge++ )
{
AH_Blue blue;
FT_Pos* best_blue = 0;
FT_Pos best_dist; /* initial threshold */
/* compute the initial threshold as a fraction of the EM size */
best_dist = FT_MulFix( face_globals->face->units_per_EM / 40, y_scale );
#ifdef FT_CONFIG_CHESTER_SMALL_F
if ( best_dist > 64 / 2 )
best_dist = 64 / 2;
#else
if ( best_dist > 64 / 4 )
best_dist = 64 / 4;
#endif
for ( blue = AH_BLUE_CAPITAL_TOP; blue < AH_BLUE_MAX; blue++ )
{
/* if it is a top zone, check for right edges -- if it is a bottom */
/* zone, check for left edges */
/* */
/* of course, that's for TrueType XXX */
FT_Bool is_top_blue =
FT_BOOL( AH_IS_TOP_BLUE( blue ) );
FT_Bool is_major_dir =
FT_BOOL( edge->dir == outline->horz_major_dir );
if ( !blue_active[blue] )
continue;
/* if it is a top zone, the edge must be against the major */
/* direction; if it is a bottom zone, it must be in the major */
/* direction */
if ( is_top_blue ^ is_major_dir )
{
FT_Pos dist;
FT_Pos* blue_pos = globals->blue_refs + blue;
/* first of all, compare it to the reference position */
dist = edge->fpos - *blue_pos;
if ( dist < 0 )
dist = -dist;
dist = FT_MulFix( dist, y_scale );
if ( dist < best_dist )
{
best_dist = dist;
best_blue = blue_pos;
}
/* now, compare it to the overshoot position if the edge is */
/* rounded, and if the edge is over the reference position of a */
/* top zone, or under the reference position of a bottom zone */
if ( edge->flags & AH_EDGE_ROUND && dist != 0 )
{
FT_Bool is_under_ref = FT_BOOL( edge->fpos < *blue_pos );
if ( is_top_blue ^ is_under_ref )
{
blue_pos = globals->blue_shoots + blue;
dist = edge->fpos - *blue_pos;
if ( dist < 0 )
dist = -dist;
dist = FT_MulFix( dist, y_scale );
if ( dist < best_dist )
{
best_dist = dist;
best_blue = blue_pos;
}
}
}
}
}
if ( best_blue )
edge->blue_edge = best_blue;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* ah_outline_scale_blue_edges */
/* */
/* <Description> */
/* This function must be called before hinting in order to re-adjust */
/* the contents of the detected edges (basically change the `blue */
/* edge' pointer from `design units' to `scaled ones'). */
/* */
FT_LOCAL_DEF( void )
ah_outline_scale_blue_edges( AH_Outline outline,
AH_Face_Globals globals )
{
AH_Edge edge = outline->horz_edges;
AH_Edge edge_limit = edge + outline->num_hedges;
FT_Pos delta;
delta = globals->scaled.blue_refs - globals->design.blue_refs;
for ( ; edge < edge_limit; edge++ )
{
if ( edge->blue_edge )
edge->blue_edge += delta;
}
}
/* END */