ref: b75abeb5e6561024d182ccdc0eb36a7d2630310e
dir: /builds/unix/ftconfig.in/
/****************************************************************************
*
* ftconfig.in
*
* UNIX-specific configuration file (specification only).
*
* Copyright 1996-2018 by
* David Turner, Robert Wilhelm, and Werner Lemberg.
*
* This file is part of the FreeType project, and may only be used,
* modified, and distributed under the terms of the FreeType project
* license, LICENSE.TXT. By continuing to use, modify, or distribute
* this file you indicate that you have read the license and
* understand and accept it fully.
*
*/
/**************************************************************************
*
* This header file contains a number of macro definitions that are used by
* the rest of the engine. Most of the macros here are automatically
* determined at compile time, and you should not need to change it to port
* FreeType, except to compile the library with a non-ANSI compiler.
*
* Note however that if some specific modifications are needed, we advise
* you to place a modified copy in your build directory.
*
* The build directory is usually `builds/<system>`, and contains
* system-specific files that are always included first when building the
* library.
*
*/
#ifndef FTCONFIG_H_
#define FTCONFIG_H_
#include <ft2build.h>
#include FT_CONFIG_OPTIONS_H
#include FT_CONFIG_STANDARD_LIBRARY_H
FT_BEGIN_HEADER
/**************************************************************************
*
* PLATFORM-SPECIFIC CONFIGURATION MACROS
*
* These macros can be toggled to suit a specific system. The current ones
* are defaults used to compile FreeType in an ANSI C environment (16bit
* compilers are also supported). Copy this file to your own
* `builds/<system>` directory, and edit it to port the engine.
*
*/
#undef HAVE_UNISTD_H
#undef HAVE_FCNTL_H
#undef HAVE_STDINT_H
/* There are systems (like the Texas Instruments 'C54x) where a `char` */
/* has 16~bits. ANSI~C says that `sizeof(char)` is always~1. Since an */
/* `int` has 16~bits also for this system, `sizeof(int)` gives~1 which */
/* is probably unexpected. */
/* */
/* `CHAR_BIT` (defined in `limits.h`) gives the number of bits in a */
/* `char` type. */
#ifndef FT_CHAR_BIT
#define FT_CHAR_BIT CHAR_BIT
#endif
#undef FT_USE_AUTOCONF_SIZEOF_TYPES
#ifdef FT_USE_AUTOCONF_SIZEOF_TYPES
#undef SIZEOF_INT
#undef SIZEOF_LONG
#define FT_SIZEOF_INT SIZEOF_INT
#define FT_SIZEOF_LONG SIZEOF_LONG
#else /* !FT_USE_AUTOCONF_SIZEOF_TYPES */
/* Following cpp computation of the bit length of `int` and `long` */
/* is copied from default `include/freetype/config/ftconfig.h`. */
/* If any improvement is required for this file, it should be */
/* applied to the original header file for the builders that do */
/* not use configure script. */
/* The size of an `int` type. */
#if FT_UINT_MAX == 0xFFFFUL
#define FT_SIZEOF_INT ( 16 / FT_CHAR_BIT )
#elif FT_UINT_MAX == 0xFFFFFFFFUL
#define FT_SIZEOF_INT ( 32 / FT_CHAR_BIT )
#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL
#define FT_SIZEOF_INT ( 64 / FT_CHAR_BIT )
#else
#error "Unsupported size of `int' type!"
#endif
/* The size of a `long` type. A five-byte `long` (as used e.g. on the */
/* DM642) is recognized but avoided. */
#if FT_ULONG_MAX == 0xFFFFFFFFUL
#define FT_SIZEOF_LONG ( 32 / FT_CHAR_BIT )
#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL
#define FT_SIZEOF_LONG ( 32 / FT_CHAR_BIT )
#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL
#define FT_SIZEOF_LONG ( 64 / FT_CHAR_BIT )
#else
#error "Unsupported size of `long' type!"
#endif
#endif /* !FT_USE_AUTOCONF_SIZEOF_TYPES */
/* `FT_UNUSED` indicates that a given parameter is not used -- */
/* this is only used to get rid of unpleasant compiler warnings. */
#ifndef FT_UNUSED
#define FT_UNUSED( arg ) ( (arg) = (arg) )
#endif
/**************************************************************************
*
* AUTOMATIC CONFIGURATION MACROS
*
* These macros are computed from the ones defined above. Don't touch
* their definition, unless you know precisely what you are doing. No
* porter should need to mess with them.
*
*/
/**************************************************************************
*
* Mac support
*
* This is the only necessary change, so it is defined here instead
* providing a new configuration file.
*/
#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) )
/* No Carbon frameworks for 64bit 10.4.x. */
/* `AvailabilityMacros.h` is available since Mac OS X 10.2, */
/* so guess the system version by maximum errno before inclusion. */
#include <errno.h>
#ifdef ECANCELED /* defined since 10.2 */
#include "AvailabilityMacros.h"
#endif
#if defined( __LP64__ ) && \
( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 )
/undef FT_MACINTOSH
#endif
#elif defined( __SC__ ) || defined( __MRC__ )
/* Classic MacOS compilers */
#include "ConditionalMacros.h"
#if TARGET_OS_MAC
#define FT_MACINTOSH 1
#endif
#endif
/* Fix compiler warning with sgi compiler. */
#if defined( __sgi ) && !defined( __GNUC__ )
#if defined( _COMPILER_VERSION ) && ( _COMPILER_VERSION >= 730 )
#pragma set woff 3505
#endif
#endif
/**************************************************************************
*
* @section:
* basic_types
*
*/
/**************************************************************************
*
* @type:
* FT_Int16
*
* @description:
* A typedef for a 16bit signed integer type.
*/
typedef signed short FT_Int16;
/**************************************************************************
*
* @type:
* FT_UInt16
*
* @description:
* A typedef for a 16bit unsigned integer type.
*/
typedef unsigned short FT_UInt16;
/* */
/* this #if 0 ... #endif clause is for documentation purposes */
#if 0
/**************************************************************************
*
* @type:
* FT_Int32
*
* @description:
* A typedef for a 32bit signed integer type. The size depends on the
* configuration.
*/
typedef signed XXX FT_Int32;
/**************************************************************************
*
* @type:
* FT_UInt32
*
* A typedef for a 32bit unsigned integer type. The size depends on the
* configuration.
*/
typedef unsigned XXX FT_UInt32;
/**************************************************************************
*
* @type:
* FT_Int64
*
* A typedef for a 64bit signed integer type. The size depends on the
* configuration. Only defined if there is real 64bit support;
* otherwise, it gets emulated with a structure (if necessary).
*/
typedef signed XXX FT_Int64;
/**************************************************************************
*
* @type:
* FT_UInt64
*
* A typedef for a 64bit unsigned integer type. The size depends on the
* configuration. Only defined if there is real 64bit support;
* otherwise, it gets emulated with a structure (if necessary).
*/
typedef unsigned XXX FT_UInt64;
/* */
#endif
#if FT_SIZEOF_INT == 4
typedef signed int FT_Int32;
typedef unsigned int FT_UInt32;
#elif FT_SIZEOF_LONG == 4
typedef signed long FT_Int32;
typedef unsigned long FT_UInt32;
#else
#error "no 32bit type found -- please check your configuration files"
#endif
/* look up an integer type that is at least 32~bits */
#if FT_SIZEOF_INT >= 4
typedef int FT_Fast;
typedef unsigned int FT_UFast;
#elif FT_SIZEOF_LONG >= 4
typedef long FT_Fast;
typedef unsigned long FT_UFast;
#endif
/* determine whether we have a 64-bit `int` type for platforms without */
/* Autoconf */
#if FT_SIZEOF_LONG == 8
/* `FT_LONG64` must be defined if a 64-bit type is available */
#define FT_LONG64
#define FT_INT64 long
#define FT_UINT64 unsigned long
/* we handle the LLP64 scheme separately for GCC and clang, */
/* suppressing the `long long` warning */
#elif ( FT_SIZEOF_LONG == 4 ) && \
defined( HAVE_LONG_LONG_INT ) && \
defined( __GNUC__ )
#pragma GCC diagnostic ignored "-Wlong-long"
#define FT_LONG64
#define FT_INT64 long long int
#define FT_UINT64 unsigned long long int
/**************************************************************************
*
* A 64-bit data type may create compilation problems if you compile in
* strict ANSI mode. To avoid them, we disable other 64-bit data types if
* `__STDC__` is defined. You can however ignore this rule by defining the
* `FT_CONFIG_OPTION_FORCE_INT64` configuration macro.
*/
#elif !defined( __STDC__ ) || defined( FT_CONFIG_OPTION_FORCE_INT64 )
#if defined( __STDC_VERSION__ ) && __STDC_VERSION__ >= 199901L
#define FT_LONG64
#define FT_INT64 long long int
#define FT_UINT64 unsigned long long int
#elif defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */
/* this compiler provides the `__int64` type */
#define FT_LONG64
#define FT_INT64 __int64
#define FT_UINT64 unsigned __int64
#elif defined( __BORLANDC__ ) /* Borland C++ */
/* XXXX: We should probably check the value of `__BORLANDC__` in order */
/* to test the compiler version. */
/* this compiler provides the `__int64` type */
#define FT_LONG64
#define FT_INT64 __int64
#define FT_UINT64 unsigned __int64
#elif defined( __WATCOMC__ ) /* Watcom C++ */
/* Watcom doesn't provide 64-bit data types */
#elif defined( __MWERKS__ ) /* Metrowerks CodeWarrior */
#define FT_LONG64
#define FT_INT64 long long int
#define FT_UINT64 unsigned long long int
#elif defined( __GNUC__ )
/* GCC provides the `long long` type */
#define FT_LONG64
#define FT_INT64 long long int
#define FT_UINT64 unsigned long long int
#endif /* __STDC_VERSION__ >= 199901L */
#endif /* FT_SIZEOF_LONG == 8 */
#ifdef FT_LONG64
typedef FT_INT64 FT_Int64;
typedef FT_UINT64 FT_UInt64;
#endif
#ifdef _WIN64
/* only 64bit Windows uses the LLP64 data model, i.e., */
/* 32bit integers, 64bit pointers */
#define FT_UINT_TO_POINTER( x ) (void*)(unsigned __int64)(x)
#else
#define FT_UINT_TO_POINTER( x ) (void*)(unsigned long)(x)
#endif
/**************************************************************************
*
* miscellaneous
*
*/
#define FT_BEGIN_STMNT do {
#define FT_END_STMNT } while ( 0 )
#define FT_DUMMY_STMNT FT_BEGIN_STMNT FT_END_STMNT
/* `typeof` condition taken from gnulib's `intprops.h` header file */
#if ( ( defined( __GNUC__ ) && __GNUC__ >= 2 ) || \
( defined( __IBMC__ ) && __IBMC__ >= 1210 && \
defined( __IBM__TYPEOF__ ) ) || \
( defined( __SUNPRO_C ) && __SUNPRO_C >= 0x5110 && !__STDC__ ) )
#define FT_TYPEOF( type ) ( __typeof__ ( type ) )
#else
#define FT_TYPEOF( type ) /* empty */
#endif
/* Use `FT_LOCAL` and `FT_LOCAL_DEF` to declare and define, */
/* respectively, a function that gets used only within the scope of a */
/* module. Normally, both the header and source code files for such a */
/* function are within a single module directory. */
/* */
/* Intra-module arrays should be tagged with `FT_LOCAL_ARRAY` and */
/* `FT_LOCAL_ARRAY_DEF`. */
/* */
#ifdef FT_MAKE_OPTION_SINGLE_OBJECT
#define FT_LOCAL( x ) static x
#define FT_LOCAL_DEF( x ) static x
#else
#ifdef __cplusplus
#define FT_LOCAL( x ) extern "C" x
#define FT_LOCAL_DEF( x ) extern "C" x
#else
#define FT_LOCAL( x ) extern x
#define FT_LOCAL_DEF( x ) x
#endif
#endif /* FT_MAKE_OPTION_SINGLE_OBJECT */
#define FT_LOCAL_ARRAY( x ) extern const x
#define FT_LOCAL_ARRAY_DEF( x ) const x
/* Use `FT_BASE` and `FT_BASE_DEF` to declare and define, respectively, */
/* functions that are used in more than a single module. In the */
/* current setup this implies that the declaration is in a header file */
/* in the `include/freetype/internal` directory, and the function body */
/* is in a file in `src/base`. */
/* */
#ifndef FT_BASE
#ifdef __cplusplus
#define FT_BASE( x ) extern "C" x
#else
#define FT_BASE( x ) extern x
#endif
#endif /* !FT_BASE */
#ifndef FT_BASE_DEF
#ifdef __cplusplus
#define FT_BASE_DEF( x ) x
#else
#define FT_BASE_DEF( x ) x
#endif
#endif /* !FT_BASE_DEF */
/* When compiling FreeType as a DLL or DSO with hidden visibility */
/* some systems/compilers need a special attribute in front OR after */
/* the return type of function declarations. */
/* */
/* Two macros are used within the FreeType source code to define */
/* exported library functions: `FT_EXPORT` and `FT_EXPORT_DEF`. */
/* */
/* - `FT_EXPORT( return_type )` */
/* */
/* is used in a function declaration, as in */
/* */
/* ``` */
/* FT_EXPORT( FT_Error ) */
/* FT_Init_FreeType( FT_Library* alibrary ); */
/* ``` */
/* */
/* - `FT_EXPORT_DEF( return_type )` */
/* */
/* is used in a function definition, as in */
/* */
/* ``` */
/* FT_EXPORT_DEF( FT_Error ) */
/* FT_Init_FreeType( FT_Library* alibrary ) */
/* { */
/* ... some code ... */
/* return FT_Err_Ok; */
/* } */
/* ``` */
/* */
/* You can provide your own implementation of `FT_EXPORT` and */
/* `FT_EXPORT_DEF` here if you want. */
/* */
/* To export a variable, use `FT_EXPORT_VAR`. */
/* */
#ifndef FT_EXPORT
#ifdef FT2_BUILD_LIBRARY
#if defined( _WIN32 ) && defined( DLL_EXPORT )
#define FT_EXPORT( x ) __declspec( dllexport ) x
#elif defined( __GNUC__ ) && __GNUC__ >= 4
#define FT_EXPORT( x ) __attribute__(( visibility( "default" ) )) x
#elif defined( __SUNPRO_C ) && __SUNPRO_C >= 0x550
#define FT_EXPORT( x ) __global x
#elif defined( __cplusplus )
#define FT_EXPORT( x ) extern "C" x
#else
#define FT_EXPORT( x ) extern x
#endif
#else
#if defined( _WIN32 ) && defined( DLL_IMPORT )
#define FT_EXPORT( x ) __declspec( dllimport ) x
#elif defined( __cplusplus )
#define FT_EXPORT( x ) extern "C" x
#else
#define FT_EXPORT( x ) extern x
#endif
#endif
#endif /* !FT_EXPORT */
#ifndef FT_EXPORT_DEF
#ifdef __cplusplus
#define FT_EXPORT_DEF( x ) extern "C" x
#else
#define FT_EXPORT_DEF( x ) extern x
#endif
#endif /* !FT_EXPORT_DEF */
#ifndef FT_EXPORT_VAR
#ifdef __cplusplus
#define FT_EXPORT_VAR( x ) extern "C" x
#else
#define FT_EXPORT_VAR( x ) extern x
#endif
#endif /* !FT_EXPORT_VAR */
/* The following macros are needed to compile the library with a */
/* C++ compiler and with 16bit compilers. */
/* */
/* This is special. Within C++, you must specify `extern "C"` for */
/* functions which are used via function pointers, and you also */
/* must do that for structures which contain function pointers to */
/* assure C linkage -- it's not possible to have (local) anonymous */
/* functions which are accessed by (global) function pointers. */
/* */
/* */
/* FT_CALLBACK_DEF is used to _define_ a callback function, */
/* located in the same source code file as the structure that uses */
/* it. */
/* */
/* FT_BASE_CALLBACK and FT_BASE_CALLBACK_DEF are used to declare */
/* and define a callback function, respectively, in a similar way */
/* as FT_BASE and FT_BASE_DEF work. */
/* */
/* FT_CALLBACK_TABLE is used to _declare_ a constant variable that */
/* contains pointers to callback functions. */
/* */
/* FT_CALLBACK_TABLE_DEF is used to _define_ a constant variable */
/* that contains pointers to callback functions. */
/* */
/* */
/* Some 16bit compilers have to redefine these macros to insert */
/* the infamous `_cdecl` or `__fastcall` declarations. */
/* */
#ifndef FT_CALLBACK_DEF
#ifdef __cplusplus
#define FT_CALLBACK_DEF( x ) extern "C" x
#else
#define FT_CALLBACK_DEF( x ) static x
#endif
#endif /* FT_CALLBACK_DEF */
#ifndef FT_BASE_CALLBACK
#ifdef __cplusplus
#define FT_BASE_CALLBACK( x ) extern "C" x
#define FT_BASE_CALLBACK_DEF( x ) extern "C" x
#else
#define FT_BASE_CALLBACK( x ) extern x
#define FT_BASE_CALLBACK_DEF( x ) x
#endif
#endif /* FT_BASE_CALLBACK */
#ifndef FT_CALLBACK_TABLE
#ifdef __cplusplus
#define FT_CALLBACK_TABLE extern "C"
#define FT_CALLBACK_TABLE_DEF extern "C"
#else
#define FT_CALLBACK_TABLE extern
#define FT_CALLBACK_TABLE_DEF /* nothing */
#endif
#endif /* FT_CALLBACK_TABLE */
FT_END_HEADER
#endif /* FTCONFIG_H_ */
/* END */