ref: a6523a671939a6e62cacd82d62fe04bc50f5bce1
dir: /src/cff/cffgload.c/
/***************************************************************************/
/* */
/* cffgload.c */
/* */
/* OpenType Glyph Loader (body). */
/* */
/* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#include <ft2build.h>
#include FT_INTERNAL_DEBUG_H
#include FT_INTERNAL_CALC_H
#include FT_INTERNAL_STREAM_H
#include FT_INTERNAL_SFNT_H
#include FT_OUTLINE_H
#include FT_TRUETYPE_TAGS_H
#include FT_INTERNAL_POSTSCRIPT_HINTS_H
#include "cffobjs.h"
#include "cffload.h"
#include "cffgload.h"
#include "cfferrs.h"
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_cffgload
typedef enum CFF_Operator_
{
cff_op_unknown = 0,
cff_op_rmoveto,
cff_op_hmoveto,
cff_op_vmoveto,
cff_op_rlineto,
cff_op_hlineto,
cff_op_vlineto,
cff_op_rrcurveto,
cff_op_hhcurveto,
cff_op_hvcurveto,
cff_op_rcurveline,
cff_op_rlinecurve,
cff_op_vhcurveto,
cff_op_vvcurveto,
cff_op_flex,
cff_op_hflex,
cff_op_hflex1,
cff_op_flex1,
cff_op_endchar,
cff_op_hstem,
cff_op_vstem,
cff_op_hstemhm,
cff_op_vstemhm,
cff_op_hintmask,
cff_op_cntrmask,
cff_op_dotsection, /* deprecated, acts as no-op */
cff_op_abs,
cff_op_add,
cff_op_sub,
cff_op_div,
cff_op_neg,
cff_op_random,
cff_op_mul,
cff_op_sqrt,
cff_op_blend,
cff_op_drop,
cff_op_exch,
cff_op_index,
cff_op_roll,
cff_op_dup,
cff_op_put,
cff_op_get,
cff_op_store,
cff_op_load,
cff_op_and,
cff_op_or,
cff_op_not,
cff_op_eq,
cff_op_ifelse,
cff_op_callsubr,
cff_op_callgsubr,
cff_op_return,
/* do not remove */
cff_op_max
} CFF_Operator;
#define CFF_COUNT_CHECK_WIDTH 0x80
#define CFF_COUNT_EXACT 0x40
#define CFF_COUNT_CLEAR_STACK 0x20
static const FT_Byte cff_argument_counts[] =
{
0, /* unknown */
2 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, /* rmoveto */
1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT,
1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT,
0 | CFF_COUNT_CLEAR_STACK, /* rlineto */
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK, /* rrcurveto */
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
0 | CFF_COUNT_CLEAR_STACK,
13, /* flex */
7,
9,
11,
0 | CFF_COUNT_CHECK_WIDTH, /* endchar */
2 | CFF_COUNT_CHECK_WIDTH, /* hstem */
2 | CFF_COUNT_CHECK_WIDTH,
2 | CFF_COUNT_CHECK_WIDTH,
2 | CFF_COUNT_CHECK_WIDTH,
0 | CFF_COUNT_CHECK_WIDTH, /* hintmask */
0 | CFF_COUNT_CHECK_WIDTH, /* cntrmask */
0, /* dotsection */
1, /* abs */
2,
2,
2,
1,
0,
2,
1,
1, /* blend */
1, /* drop */
2,
1,
2,
1,
2, /* put */
1,
4,
3,
2, /* and */
2,
1,
2,
4,
1, /* callsubr */
1,
0
};
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********** *********/
/********** *********/
/********** GENERIC CHARSTRING PARSING *********/
/********** *********/
/********** *********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* cff_builder_init */
/* */
/* <Description> */
/* Initializes a given glyph builder. */
/* */
/* <InOut> */
/* builder :: A pointer to the glyph builder to initialize. */
/* */
/* <Input> */
/* face :: The current face object. */
/* */
/* size :: The current size object. */
/* */
/* glyph :: The current glyph object. */
/* */
static void
cff_builder_init( CFF_Builder* builder,
TT_Face face,
CFF_Size size,
CFF_GlyphSlot glyph,
FT_Bool hinting )
{
builder->path_begun = 0;
builder->load_points = 1;
builder->face = face;
builder->glyph = glyph;
builder->memory = face->root.memory;
if ( glyph )
{
FT_GlyphLoader loader = glyph->root.internal->loader;
builder->loader = loader;
builder->base = &loader->base.outline;
builder->current = &loader->current.outline;
FT_GlyphLoader_Rewind( loader );
builder->hints_globals = 0;
builder->hints_funcs = 0;
if ( hinting && size )
{
builder->hints_globals = size->root.internal;
builder->hints_funcs = glyph->root.internal->glyph_hints;
}
}
if ( size )
{
builder->scale_x = size->root.metrics.x_scale;
builder->scale_y = size->root.metrics.y_scale;
}
builder->pos_x = 0;
builder->pos_y = 0;
builder->left_bearing.x = 0;
builder->left_bearing.y = 0;
builder->advance.x = 0;
builder->advance.y = 0;
}
/*************************************************************************/
/* */
/* <Function> */
/* cff_builder_done */
/* */
/* <Description> */
/* Finalizes a given glyph builder. Its contents can still be used */
/* after the call, but the function saves important information */
/* within the corresponding glyph slot. */
/* */
/* <Input> */
/* builder :: A pointer to the glyph builder to finalize. */
/* */
static void
cff_builder_done( CFF_Builder* builder )
{
CFF_GlyphSlot glyph = builder->glyph;
if ( glyph )
glyph->root.outline = *builder->base;
}
/*************************************************************************/
/* */
/* <Function> */
/* cff_compute_bias */
/* */
/* <Description> */
/* Computes the bias value in dependence of the number of glyph */
/* subroutines. */
/* */
/* <Input> */
/* num_subrs :: The number of glyph subroutines. */
/* */
/* <Return> */
/* The bias value. */
static FT_Int
cff_compute_bias( FT_UInt num_subrs )
{
FT_Int result;
if ( num_subrs < 1240 )
result = 107;
else if ( num_subrs < 33900U )
result = 1131;
else
result = 32768U;
return result;
}
/*************************************************************************/
/* */
/* <Function> */
/* cff_decoder_init */
/* */
/* <Description> */
/* Initializes a given glyph decoder. */
/* */
/* <InOut> */
/* decoder :: A pointer to the glyph builder to initialize. */
/* */
/* <Input> */
/* face :: The current face object. */
/* */
/* size :: The current size object. */
/* */
/* slot :: The current glyph object. */
/* */
FT_LOCAL_DEF( void )
cff_decoder_init( CFF_Decoder* decoder,
TT_Face face,
CFF_Size size,
CFF_GlyphSlot slot,
FT_Bool hinting,
FT_Render_Mode hint_mode )
{
CFF_Font cff = (CFF_Font)face->extra.data;
/* clear everything */
FT_MEM_ZERO( decoder, sizeof ( *decoder ) );
/* initialize builder */
cff_builder_init( &decoder->builder, face, size, slot, hinting );
/* initialize Type2 decoder */
decoder->num_globals = cff->num_global_subrs;
decoder->globals = cff->global_subrs;
decoder->globals_bias = cff_compute_bias( decoder->num_globals );
decoder->hint_mode = hint_mode;
}
/* this function is used to select the locals subrs array */
FT_LOCAL_DEF( void )
cff_decoder_prepare( CFF_Decoder* decoder,
FT_UInt glyph_index )
{
CFF_Font cff = (CFF_Font)decoder->builder.face->extra.data;
CFF_SubFont sub = &cff->top_font;
/* manage CID fonts */
if ( cff->num_subfonts >= 1 )
{
FT_Byte fd_index = cff_fd_select_get( &cff->fd_select, glyph_index );
sub = cff->subfonts[fd_index];
}
decoder->num_locals = sub->num_local_subrs;
decoder->locals = sub->local_subrs;
decoder->locals_bias = cff_compute_bias( decoder->num_locals );
decoder->glyph_width = sub->private_dict.default_width;
decoder->nominal_width = sub->private_dict.nominal_width;
}
/* check that there is enough space for `count' more points */
static FT_Error
check_points( CFF_Builder* builder,
FT_Int count )
{
return FT_GLYPHLOADER_CHECK_POINTS( builder->loader, count, 0 );
}
/* add a new point, do not check space */
static void
cff_builder_add_point( CFF_Builder* builder,
FT_Pos x,
FT_Pos y,
FT_Byte flag )
{
FT_Outline* outline = builder->current;
if ( builder->load_points )
{
FT_Vector* point = outline->points + outline->n_points;
FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points;
point->x = x >> 16;
point->y = y >> 16;
*control = (FT_Byte)( flag ? FT_CURVE_TAG_ON : FT_CURVE_TAG_CUBIC );
builder->last = *point;
}
outline->n_points++;
}
/* check space for a new on-curve point, then add it */
static FT_Error
cff_builder_add_point1( CFF_Builder* builder,
FT_Pos x,
FT_Pos y )
{
FT_Error error;
error = check_points( builder, 1 );
if ( !error )
cff_builder_add_point( builder, x, y, 1 );
return error;
}
/* check space for a new contour, then add it */
static FT_Error
cff_builder_add_contour( CFF_Builder* builder )
{
FT_Outline* outline = builder->current;
FT_Error error;
if ( !builder->load_points )
{
outline->n_contours++;
return CFF_Err_Ok;
}
error = FT_GLYPHLOADER_CHECK_POINTS( builder->loader, 0, 1 );
if ( !error )
{
if ( outline->n_contours > 0 )
outline->contours[outline->n_contours - 1] =
(short)( outline->n_points - 1 );
outline->n_contours++;
}
return error;
}
/* if a path was begun, add its first on-curve point */
static FT_Error
cff_builder_start_point( CFF_Builder* builder,
FT_Pos x,
FT_Pos y )
{
FT_Error error = CFF_Err_Ok;
/* test whether we are building a new contour */
if ( !builder->path_begun )
{
builder->path_begun = 1;
error = cff_builder_add_contour( builder );
if ( !error )
error = cff_builder_add_point1( builder, x, y );
}
return error;
}
/* close the current contour */
static void
cff_builder_close_contour( CFF_Builder* builder )
{
FT_Outline* outline = builder->current;
if ( !outline )
return;
/* XXXX: We must not include the last point in the path if it */
/* is located on the first point. */
if ( outline->n_points > 1 )
{
FT_Int first = 0;
FT_Vector* p1 = outline->points + first;
FT_Vector* p2 = outline->points + outline->n_points - 1;
FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points - 1;
if ( outline->n_contours > 1 )
{
first = outline->contours[outline->n_contours - 2] + 1;
p1 = outline->points + first;
}
/* `delete' last point only if it coincides with the first */
/* point and if it is not a control point (which can happen). */
if ( p1->x == p2->x && p1->y == p2->y )
if ( *control == FT_CURVE_TAG_ON )
outline->n_points--;
}
if ( outline->n_contours > 0 )
outline->contours[outline->n_contours - 1] =
(short)( outline->n_points - 1 );
}
static FT_Int
cff_lookup_glyph_by_stdcharcode( CFF_Font cff,
FT_Int charcode )
{
FT_UInt n;
FT_UShort glyph_sid;
/* CID-keyed fonts don't have glyph names */
if ( !cff->charset.sids )
return -1;
/* check range of standard char code */
if ( charcode < 0 || charcode > 255 )
return -1;
/* Get code to SID mapping from `cff_standard_encoding'. */
glyph_sid = cff_get_standard_encoding( (FT_UInt)charcode );
for ( n = 0; n < cff->num_glyphs; n++ )
{
if ( cff->charset.sids[n] == glyph_sid )
return n;
}
return -1;
}
static FT_Error
cff_get_glyph_data( TT_Face face,
FT_UInt glyph_index,
FT_Byte** pointer,
FT_ULong* length )
{
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* For incremental fonts get the character data using the */
/* callback function. */
if ( face->root.internal->incremental_interface )
{
FT_Data data;
FT_Error error =
face->root.internal->incremental_interface->funcs->get_glyph_data(
face->root.internal->incremental_interface->object,
glyph_index, &data );
*pointer = (FT_Byte*)data.pointer;
*length = data.length;
return error;
}
else
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
{
CFF_Font cff = (CFF_Font)(face->extra.data);
return cff_index_access_element( &cff->charstrings_index, glyph_index,
pointer, length );
}
}
static void
cff_free_glyph_data( TT_Face face,
FT_Byte** pointer,
FT_ULong length )
{
#ifndef FT_CONFIG_OPTION_INCREMENTAL
FT_UNUSED( length );
#endif
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* For incremental fonts get the character data using the */
/* callback function. */
if ( face->root.internal->incremental_interface )
{
FT_Data data;
data.pointer = *pointer;
data.length = length;
face->root.internal->incremental_interface->funcs->free_glyph_data(
face->root.internal->incremental_interface->object,&data );
}
else
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
{
CFF_Font cff = (CFF_Font)(face->extra.data);
cff_index_forget_element( &cff->charstrings_index, pointer );
}
}
static FT_Error
cff_operator_seac( CFF_Decoder* decoder,
FT_Pos adx,
FT_Pos ady,
FT_Int bchar,
FT_Int achar )
{
FT_Error error;
CFF_Builder* builder = &decoder->builder;
FT_Int bchar_index, achar_index;
TT_Face face = decoder->builder.face;
FT_Vector left_bearing, advance;
FT_Byte* charstring;
FT_ULong charstring_len;
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* Incremental fonts don't necessarily have valid charsets. */
/* They use the character code, not the glyph index, in this case. */
if ( face->root.internal->incremental_interface )
{
bchar_index = bchar;
achar_index = achar;
}
else
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
{
CFF_Font cff = (CFF_Font)(face->extra.data);
bchar_index = cff_lookup_glyph_by_stdcharcode( cff, bchar );
achar_index = cff_lookup_glyph_by_stdcharcode( cff, achar );
}
if ( bchar_index < 0 || achar_index < 0 )
{
FT_ERROR(( "cff_operator_seac:" ));
FT_ERROR(( " invalid seac character code arguments\n" ));
return CFF_Err_Syntax_Error;
}
/* If we are trying to load a composite glyph, do not load the */
/* accent character and return the array of subglyphs. */
if ( builder->no_recurse )
{
FT_GlyphSlot glyph = (FT_GlyphSlot)builder->glyph;
FT_GlyphLoader loader = glyph->internal->loader;
FT_SubGlyph subg;
/* reallocate subglyph array if necessary */
error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 );
if ( error )
goto Exit;
subg = loader->current.subglyphs;
/* subglyph 0 = base character */
subg->index = bchar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES |
FT_SUBGLYPH_FLAG_USE_MY_METRICS;
subg->arg1 = 0;
subg->arg2 = 0;
subg++;
/* subglyph 1 = accent character */
subg->index = achar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES;
subg->arg1 = (FT_Int)( adx >> 16 );
subg->arg2 = (FT_Int)( ady >> 16 );
/* set up remaining glyph fields */
glyph->num_subglyphs = 2;
glyph->subglyphs = loader->base.subglyphs;
glyph->format = FT_GLYPH_FORMAT_COMPOSITE;
loader->current.num_subglyphs = 2;
}
FT_GlyphLoader_Prepare( builder->loader );
/* First load `bchar' in builder */
error = cff_get_glyph_data( face, bchar_index,
&charstring, &charstring_len );
if ( !error )
{
error = cff_decoder_parse_charstrings( decoder, charstring,
charstring_len );
if ( error )
goto Exit;
cff_free_glyph_data( face, &charstring, charstring_len );
}
/* Save the left bearing and width of the base character */
/* as they will be erased by the next load. */
left_bearing = builder->left_bearing;
advance = builder->advance;
builder->left_bearing.x = 0;
builder->left_bearing.y = 0;
builder->pos_x = adx;
builder->pos_y = ady;
/* Now load `achar' on top of the base outline. */
error = cff_get_glyph_data( face, achar_index,
&charstring, &charstring_len );
if ( !error )
{
error = cff_decoder_parse_charstrings( decoder, charstring,
charstring_len );
if ( error )
goto Exit;
cff_free_glyph_data( face, &charstring, charstring_len );
}
/* Restore the left side bearing and advance width */
/* of the base character. */
builder->left_bearing = left_bearing;
builder->advance = advance;
builder->pos_x = 0;
builder->pos_y = 0;
Exit:
return error;
}
/*************************************************************************/
/* */
/* <Function> */
/* cff_decoder_parse_charstrings */
/* */
/* <Description> */
/* Parses a given Type 2 charstrings program. */
/* */
/* <InOut> */
/* decoder :: The current Type 1 decoder. */
/* */
/* <Input> */
/* charstring_base :: The base of the charstring stream. */
/* */
/* charstring_len :: The length in bytes of the charstring stream. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
FT_LOCAL_DEF( FT_Error )
cff_decoder_parse_charstrings( CFF_Decoder* decoder,
FT_Byte* charstring_base,
FT_ULong charstring_len )
{
FT_Error error;
CFF_Decoder_Zone* zone;
FT_Byte* ip;
FT_Byte* limit;
CFF_Builder* builder = &decoder->builder;
FT_Pos x, y;
FT_Fixed seed;
FT_Fixed* stack;
T2_Hints_Funcs hinter;
/* set default width */
decoder->num_hints = 0;
decoder->read_width = 1;
/* compute random seed from stack address of parameter */
seed = (FT_Fixed)(char*)&seed ^
(FT_Fixed)(char*)&decoder ^
(FT_Fixed)(char*)&charstring_base;
seed = ( seed ^ ( seed >> 10 ) ^ ( seed >> 20 ) ) & 0xFFFFL;
if ( seed == 0 )
seed = 0x7384;
/* initialize the decoder */
decoder->top = decoder->stack;
decoder->zone = decoder->zones;
zone = decoder->zones;
stack = decoder->top;
hinter = (T2_Hints_Funcs)builder->hints_funcs;
builder->path_begun = 0;
zone->base = charstring_base;
limit = zone->limit = charstring_base + charstring_len;
ip = zone->cursor = zone->base;
error = CFF_Err_Ok;
x = builder->pos_x;
y = builder->pos_y;
/* begin hints recording session, if any */
if ( hinter )
hinter->open( hinter->hints );
/* now execute loop */
while ( ip < limit )
{
CFF_Operator op;
FT_Byte v;
/********************************************************************/
/* */
/* Decode operator or operand */
/* */
v = *ip++;
if ( v >= 32 || v == 28 )
{
FT_Int shift = 16;
FT_Int32 val;
/* this is an operand, push it on the stack */
if ( v == 28 )
{
if ( ip + 1 >= limit )
goto Syntax_Error;
val = (FT_Short)( ( (FT_Short)ip[0] << 8 ) | ip[1] );
ip += 2;
}
else if ( v < 247 )
val = (FT_Long)v - 139;
else if ( v < 251 )
{
if ( ip >= limit )
goto Syntax_Error;
val = ( (FT_Long)v - 247 ) * 256 + *ip++ + 108;
}
else if ( v < 255 )
{
if ( ip >= limit )
goto Syntax_Error;
val = -( (FT_Long)v - 251 ) * 256 - *ip++ - 108;
}
else
{
if ( ip + 3 >= limit )
goto Syntax_Error;
val = ( (FT_Int32)ip[0] << 24 ) |
( (FT_Int32)ip[1] << 16 ) |
( (FT_Int32)ip[2] << 8 ) |
ip[3];
ip += 4;
shift = 0;
}
if ( decoder->top - stack >= CFF_MAX_OPERANDS )
goto Stack_Overflow;
val <<= shift;
*decoder->top++ = val;
#ifdef FT_DEBUG_LEVEL_TRACE
if ( !( val & 0xFFFFL ) )
FT_TRACE4(( " %ld", (FT_Int32)( val >> 16 ) ));
else
FT_TRACE4(( " %.2f", val / 65536.0 ));
#endif
}
else
{
FT_Fixed* args = decoder->top;
FT_Int num_args = (FT_Int)( args - decoder->stack );
FT_Int req_args;
/* find operator */
op = cff_op_unknown;
switch ( v )
{
case 1:
op = cff_op_hstem;
break;
case 3:
op = cff_op_vstem;
break;
case 4:
op = cff_op_vmoveto;
break;
case 5:
op = cff_op_rlineto;
break;
case 6:
op = cff_op_hlineto;
break;
case 7:
op = cff_op_vlineto;
break;
case 8:
op = cff_op_rrcurveto;
break;
case 10:
op = cff_op_callsubr;
break;
case 11:
op = cff_op_return;
break;
case 12:
{
if ( ip >= limit )
goto Syntax_Error;
v = *ip++;
switch ( v )
{
case 0:
op = cff_op_dotsection;
break;
case 3:
op = cff_op_and;
break;
case 4:
op = cff_op_or;
break;
case 5:
op = cff_op_not;
break;
case 8:
op = cff_op_store;
break;
case 9:
op = cff_op_abs;
break;
case 10:
op = cff_op_add;
break;
case 11:
op = cff_op_sub;
break;
case 12:
op = cff_op_div;
break;
case 13:
op = cff_op_load;
break;
case 14:
op = cff_op_neg;
break;
case 15:
op = cff_op_eq;
break;
case 18:
op = cff_op_drop;
break;
case 20:
op = cff_op_put;
break;
case 21:
op = cff_op_get;
break;
case 22:
op = cff_op_ifelse;
break;
case 23:
op = cff_op_random;
break;
case 24:
op = cff_op_mul;
break;
case 26:
op = cff_op_sqrt;
break;
case 27:
op = cff_op_dup;
break;
case 28:
op = cff_op_exch;
break;
case 29:
op = cff_op_index;
break;
case 30:
op = cff_op_roll;
break;
case 34:
op = cff_op_hflex;
break;
case 35:
op = cff_op_flex;
break;
case 36:
op = cff_op_hflex1;
break;
case 37:
op = cff_op_flex1;
break;
default:
/* decrement ip for syntax error message */
ip--;
}
}
break;
case 14:
op = cff_op_endchar;
break;
case 16:
op = cff_op_blend;
break;
case 18:
op = cff_op_hstemhm;
break;
case 19:
op = cff_op_hintmask;
break;
case 20:
op = cff_op_cntrmask;
break;
case 21:
op = cff_op_rmoveto;
break;
case 22:
op = cff_op_hmoveto;
break;
case 23:
op = cff_op_vstemhm;
break;
case 24:
op = cff_op_rcurveline;
break;
case 25:
op = cff_op_rlinecurve;
break;
case 26:
op = cff_op_vvcurveto;
break;
case 27:
op = cff_op_hhcurveto;
break;
case 29:
op = cff_op_callgsubr;
break;
case 30:
op = cff_op_vhcurveto;
break;
case 31:
op = cff_op_hvcurveto;
break;
default:
;
}
if ( op == cff_op_unknown )
goto Syntax_Error;
/* check arguments */
req_args = cff_argument_counts[op];
if ( req_args & CFF_COUNT_CHECK_WIDTH )
{
args = stack;
if ( num_args > 0 && decoder->read_width )
{
/* If `nominal_width' is non-zero, the number is really a */
/* difference against `nominal_width'. Else, the number here */
/* is truly a width, not a difference against `nominal_width'. */
/* If the font does not set `nominal_width', then */
/* `nominal_width' defaults to zero, and so we can set */
/* `glyph_width' to `nominal_width' plus number on the stack */
/* -- for either case. */
FT_Int set_width_ok;
switch ( op )
{
case cff_op_hmoveto:
case cff_op_vmoveto:
set_width_ok = num_args & 2;
break;
case cff_op_hstem:
case cff_op_vstem:
case cff_op_hstemhm:
case cff_op_vstemhm:
case cff_op_rmoveto:
case cff_op_hintmask:
case cff_op_cntrmask:
set_width_ok = num_args & 1;
break;
case cff_op_endchar:
/* If there is a width specified for endchar, we either have */
/* 1 argument or 5 arguments. We like to argue. */
set_width_ok = ( ( num_args == 5 ) || ( num_args == 1 ) );
break;
default:
set_width_ok = 0;
break;
}
if ( set_width_ok )
{
decoder->glyph_width = decoder->nominal_width +
( stack[0] >> 16 );
/* Consumed an argument. */
num_args--;
args++;
}
}
decoder->read_width = 0;
req_args = 0;
}
req_args &= 15;
if ( num_args < req_args )
goto Stack_Underflow;
args -= req_args;
num_args -= req_args;
switch ( op )
{
case cff_op_hstem:
case cff_op_vstem:
case cff_op_hstemhm:
case cff_op_vstemhm:
/* the number of arguments is always even here */
FT_TRACE4(( op == cff_op_hstem ? " hstem" :
( op == cff_op_vstem ? " vstem" :
( op == cff_op_hstemhm ? " hstemhm" : " vstemhm" ) ) ));
if ( hinter )
hinter->stems( hinter->hints,
( op == cff_op_hstem || op == cff_op_hstemhm ),
num_args / 2,
args );
decoder->num_hints += num_args / 2;
args = stack;
break;
case cff_op_hintmask:
case cff_op_cntrmask:
FT_TRACE4(( op == cff_op_hintmask ? " hintmask" : " cntrmask" ));
/* implement vstem when needed -- */
/* the specification doesn't say it, but this also works */
/* with the 'cntrmask' operator */
/* */
if ( num_args > 0 )
{
if ( hinter )
hinter->stems( hinter->hints,
0,
num_args / 2,
args );
decoder->num_hints += num_args / 2;
}
if ( hinter )
{
if ( op == cff_op_hintmask )
hinter->hintmask( hinter->hints,
builder->current->n_points,
decoder->num_hints,
ip );
else
hinter->counter( hinter->hints,
decoder->num_hints,
ip );
}
#ifdef FT_DEBUG_LEVEL_TRACE
{
FT_UInt maskbyte;
FT_TRACE4(( " " ));
for ( maskbyte = 0;
maskbyte < (FT_UInt)(( decoder->num_hints + 7 ) >> 3);
maskbyte++, ip++ )
FT_TRACE4(( "0x%02X", *ip ));
}
#else
ip += ( decoder->num_hints + 7 ) >> 3;
#endif
if ( ip >= limit )
goto Syntax_Error;
args = stack;
break;
case cff_op_rmoveto:
FT_TRACE4(( " rmoveto" ));
cff_builder_close_contour( builder );
builder->path_begun = 0;
x += args[0];
y += args[1];
args = stack;
break;
case cff_op_vmoveto:
FT_TRACE4(( " vmoveto" ));
cff_builder_close_contour( builder );
builder->path_begun = 0;
y += args[0];
args = stack;
break;
case cff_op_hmoveto:
FT_TRACE4(( " hmoveto" ));
cff_builder_close_contour( builder );
builder->path_begun = 0;
x += args[0];
args = stack;
break;
case cff_op_rlineto:
FT_TRACE4(( " rlineto" ));
if ( cff_builder_start_point ( builder, x, y ) ||
check_points( builder, num_args / 2 ) )
goto Fail;
if ( num_args < 2 || num_args & 1 )
goto Stack_Underflow;
args = stack;
while ( args < decoder->top )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 1 );
args += 2;
}
args = stack;
break;
case cff_op_hlineto:
case cff_op_vlineto:
{
FT_Int phase = ( op == cff_op_hlineto );
FT_TRACE4(( op == cff_op_hlineto ? " hlineto"
: " vlineto" ));
if ( cff_builder_start_point ( builder, x, y ) ||
check_points( builder, num_args ) )
goto Fail;
args = stack;
while ( args < decoder->top )
{
if ( phase )
x += args[0];
else
y += args[0];
if ( cff_builder_add_point1( builder, x, y ) )
goto Fail;
args++;
phase ^= 1;
}
args = stack;
}
break;
case cff_op_rrcurveto:
FT_TRACE4(( " rrcurveto" ));
/* check number of arguments; must be a multiple of 6 */
if ( num_args % 6 != 0 )
goto Stack_Underflow;
if ( cff_builder_start_point ( builder, x, y ) ||
check_points( builder, num_args / 2 ) )
goto Fail;
args = stack;
while ( args < decoder->top )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 0 );
x += args[2];
y += args[3];
cff_builder_add_point( builder, x, y, 0 );
x += args[4];
y += args[5];
cff_builder_add_point( builder, x, y, 1 );
args += 6;
}
args = stack;
break;
case cff_op_vvcurveto:
FT_TRACE4(( " vvcurveto" ));
if ( cff_builder_start_point( builder, x, y ) )
goto Fail;
args = stack;
if ( num_args & 1 )
{
x += args[0];
args++;
num_args--;
}
if ( num_args % 4 != 0 )
goto Stack_Underflow;
if ( check_points( builder, 3 * ( num_args / 4 ) ) )
goto Fail;
while ( args < decoder->top )
{
y += args[0];
cff_builder_add_point( builder, x, y, 0 );
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
y += args[3];
cff_builder_add_point( builder, x, y, 1 );
args += 4;
}
args = stack;
break;
case cff_op_hhcurveto:
FT_TRACE4(( " hhcurveto" ));
if ( cff_builder_start_point( builder, x, y ) )
goto Fail;
args = stack;
if ( num_args & 1 )
{
y += args[0];
args++;
num_args--;
}
if ( num_args % 4 != 0 )
goto Stack_Underflow;
if ( check_points( builder, 3 * ( num_args / 4 ) ) )
goto Fail;
while ( args < decoder->top )
{
x += args[0];
cff_builder_add_point( builder, x, y, 0 );
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
x += args[3];
cff_builder_add_point( builder, x, y, 1 );
args += 4;
}
args = stack;
break;
case cff_op_vhcurveto:
case cff_op_hvcurveto:
{
FT_Int phase;
FT_TRACE4(( op == cff_op_vhcurveto ? " vhcurveto"
: " hvcurveto" ));
if ( cff_builder_start_point( builder, x, y ) )
goto Fail;
args = stack;
if ( num_args < 4 || ( num_args % 4 ) > 1 )
goto Stack_Underflow;
if ( check_points( builder, ( num_args / 4 ) * 3 ) )
goto Stack_Underflow;
phase = ( op == cff_op_hvcurveto );
while ( num_args >= 4 )
{
num_args -= 4;
if ( phase )
{
x += args[0];
cff_builder_add_point( builder, x, y, 0 );
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
y += args[3];
if ( num_args == 1 )
x += args[4];
cff_builder_add_point( builder, x, y, 1 );
}
else
{
y += args[0];
cff_builder_add_point( builder, x, y, 0 );
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
x += args[3];
if ( num_args == 1 )
y += args[4];
cff_builder_add_point( builder, x, y, 1 );
}
args += 4;
phase ^= 1;
}
args = stack;
}
break;
case cff_op_rlinecurve:
{
FT_Int num_lines = ( num_args - 6 ) / 2;
FT_TRACE4(( " rlinecurve" ));
if ( num_args < 8 || ( num_args - 6 ) & 1 )
goto Stack_Underflow;
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, num_lines + 3 ) )
goto Fail;
args = stack;
/* first, add the line segments */
while ( num_lines > 0 )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 1 );
args += 2;
num_lines--;
}
/* then the curve */
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 0 );
x += args[2];
y += args[3];
cff_builder_add_point( builder, x, y, 0 );
x += args[4];
y += args[5];
cff_builder_add_point( builder, x, y, 1 );
args = stack;
}
break;
case cff_op_rcurveline:
{
FT_Int num_curves = ( num_args - 2 ) / 6;
FT_TRACE4(( " rcurveline" ));
if ( num_args < 8 || ( num_args - 2 ) % 6 )
goto Stack_Underflow;
if ( cff_builder_start_point ( builder, x, y ) ||
check_points( builder, num_curves*3 + 2 ) )
goto Fail;
args = stack;
/* first, add the curves */
while ( num_curves > 0 )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 0 );
x += args[2];
y += args[3];
cff_builder_add_point( builder, x, y, 0 );
x += args[4];
y += args[5];
cff_builder_add_point( builder, x, y, 1 );
args += 6;
num_curves--;
}
/* then the final line */
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 1 );
args = stack;
}
break;
case cff_op_hflex1:
{
FT_Pos start_y;
FT_TRACE4(( " hflex1" ));
args = stack;
/* adding five more points; 4 control points, 1 on-curve point */
/* make sure we have enough space for the start point if it */
/* needs to be added */
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
/* Record the starting point's y postion for later use */
start_y = y;
/* first control point */
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, 0 );
/* second control point */
x += args[2];
y += args[3];
cff_builder_add_point( builder, x, y, 0 );
/* join point; on curve, with y-value the same as the last */
/* control point's y-value */
x += args[4];
cff_builder_add_point( builder, x, y, 1 );
/* third control point, with y-value the same as the join */
/* point's y-value */
x += args[5];
cff_builder_add_point( builder, x, y, 0 );
/* fourth control point */
x += args[6];
y += args[7];
cff_builder_add_point( builder, x, y, 0 );
/* ending point, with y-value the same as the start */
x += args[8];
y = start_y;
cff_builder_add_point( builder, x, y, 1 );
args = stack;
break;
}
case cff_op_hflex:
{
FT_Pos start_y;
FT_TRACE4(( " hflex" ));
args = stack;
/* adding six more points; 4 control points, 2 on-curve points */
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
/* record the starting point's y-position for later use */
start_y = y;
/* first control point */
x += args[0];
cff_builder_add_point( builder, x, y, 0 );
/* second control point */
x += args[1];
y += args[2];
cff_builder_add_point( builder, x, y, 0 );
/* join point; on curve, with y-value the same as the last */
/* control point's y-value */
x += args[3];
cff_builder_add_point( builder, x, y, 1 );
/* third control point, with y-value the same as the join */
/* point's y-value */
x += args[4];
cff_builder_add_point( builder, x, y, 0 );
/* fourth control point */
x += args[5];
y = start_y;
cff_builder_add_point( builder, x, y, 0 );
/* ending point, with y-value the same as the start point's */
/* y-value -- we don't add this point, though */
x += args[6];
cff_builder_add_point( builder, x, y, 1 );
args = stack;
break;
}
case cff_op_flex1:
{
FT_Pos start_x, start_y; /* record start x, y values for */
/* alter use */
FT_Fixed dx = 0, dy = 0; /* used in horizontal/vertical */
/* algorithm below */
FT_Int horizontal, count;
FT_TRACE4(( " flex1" ));
/* adding six more points; 4 control points, 2 on-curve points */
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
/* record the starting point's x, y postion for later use */
start_x = x;
start_y = y;
/* XXX: figure out whether this is supposed to be a horizontal */
/* or vertical flex; the Type 2 specification is vague... */
args = stack;
/* grab up to the last argument */
for ( count = 5; count > 0; count-- )
{
dx += args[0];
dy += args[1];
args += 2;
}
/* rewind */
args = stack;
if ( dx < 0 ) dx = -dx;
if ( dy < 0 ) dy = -dy;
/* strange test, but here it is... */
horizontal = ( dx > dy );
for ( count = 5; count > 0; count-- )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y, (FT_Bool)( count == 3 ) );
args += 2;
}
/* is last operand an x- or y-delta? */
if ( horizontal )
{
x += args[0];
y = start_y;
}
else
{
x = start_x;
y += args[0];
}
cff_builder_add_point( builder, x, y, 1 );
args = stack;
break;
}
case cff_op_flex:
{
FT_UInt count;
FT_TRACE4(( " flex" ));
if ( cff_builder_start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
args = stack;
for ( count = 6; count > 0; count-- )
{
x += args[0];
y += args[1];
cff_builder_add_point( builder, x, y,
(FT_Bool)( count == 4 || count == 1 ) );
args += 2;
}
args = stack;
}
break;
case cff_op_endchar:
FT_TRACE4(( " endchar" ));
/* We are going to emulate the seac operator. */
if ( num_args == 4 )
{
/* Save glyph width so that the subglyphs don't overwrite it. */
FT_Pos glyph_width = decoder->glyph_width;
error = cff_operator_seac( decoder,
args[0],
args[1],
(FT_Int)( args[2] >> 16 ),
(FT_Int)( args[3] >> 16 ) );
args += 4;
decoder->glyph_width = glyph_width;
}
else
{
if ( !error )
error = CFF_Err_Ok;
cff_builder_close_contour( builder );
/* close hints recording session */
if ( hinter )
{
if ( hinter->close( hinter->hints,
builder->current->n_points ) )
goto Syntax_Error;
/* apply hints to the loaded glyph outline now */
hinter->apply( hinter->hints,
builder->current,
(PSH_Globals)builder->hints_globals,
decoder->hint_mode );
}
/* add current outline to the glyph slot */
FT_GlyphLoader_Add( builder->loader );
}
/* return now! */
FT_TRACE4(( "\n\n" ));
return error;
case cff_op_abs:
FT_TRACE4(( " abs" ));
if ( args[0] < 0 )
args[0] = -args[0];
args++;
break;
case cff_op_add:
FT_TRACE4(( " add" ));
args[0] += args[1];
args++;
break;
case cff_op_sub:
FT_TRACE4(( " sub" ));
args[0] -= args[1];
args++;
break;
case cff_op_div:
FT_TRACE4(( " div" ));
args[0] = FT_DivFix( args[0], args[1] );
args++;
break;
case cff_op_neg:
FT_TRACE4(( " neg" ));
args[0] = -args[0];
args++;
break;
case cff_op_random:
{
FT_Fixed Rand;
FT_TRACE4(( " rand" ));
Rand = seed;
if ( Rand >= 0x8000L )
Rand++;
args[0] = Rand;
seed = FT_MulFix( seed, 0x10000L - seed );
if ( seed == 0 )
seed += 0x2873;
args++;
}
break;
case cff_op_mul:
FT_TRACE4(( " mul" ));
args[0] = FT_MulFix( args[0], args[1] );
args++;
break;
case cff_op_sqrt:
FT_TRACE4(( " sqrt" ));
if ( args[0] > 0 )
{
FT_Int count = 9;
FT_Fixed root = args[0];
FT_Fixed new_root;
for (;;)
{
new_root = ( root + FT_DivFix( args[0], root ) + 1 ) >> 1;
if ( new_root == root || count <= 0 )
break;
root = new_root;
}
args[0] = new_root;
}
else
args[0] = 0;
args++;
break;
case cff_op_drop:
/* nothing */
FT_TRACE4(( " drop" ));
break;
case cff_op_exch:
{
FT_Fixed tmp;
FT_TRACE4(( " exch" ));
tmp = args[0];
args[0] = args[1];
args[1] = tmp;
args += 2;
}
break;
case cff_op_index:
{
FT_Int idx = (FT_Int)( args[0] >> 16 );
FT_TRACE4(( " index" ));
if ( idx < 0 )
idx = 0;
else if ( idx > num_args - 2 )
idx = num_args - 2;
args[0] = args[-( idx + 1 )];
args++;
}
break;
case cff_op_roll:
{
FT_Int count = (FT_Int)( args[0] >> 16 );
FT_Int idx = (FT_Int)( args[1] >> 16 );
FT_TRACE4(( " roll" ));
if ( count <= 0 )
count = 1;
args -= count;
if ( args < stack )
goto Stack_Underflow;
if ( idx >= 0 )
{
while ( idx > 0 )
{
FT_Fixed tmp = args[count - 1];
FT_Int i;
for ( i = count - 2; i >= 0; i-- )
args[i + 1] = args[i];
args[0] = tmp;
idx--;
}
}
else
{
while ( idx < 0 )
{
FT_Fixed tmp = args[0];
FT_Int i;
for ( i = 0; i < count - 1; i++ )
args[i] = args[i + 1];
args[count - 1] = tmp;
idx++;
}
}
args += count;
}
break;
case cff_op_dup:
FT_TRACE4(( " dup" ));
args[1] = args[0];
args++;
break;
case cff_op_put:
{
FT_Fixed val = args[0];
FT_Int idx = (FT_Int)( args[1] >> 16 );
FT_TRACE4(( " put" ));
if ( idx >= 0 && idx < decoder->len_buildchar )
decoder->buildchar[idx] = val;
}
break;
case cff_op_get:
{
FT_Int idx = (FT_Int)( args[0] >> 16 );
FT_Fixed val = 0;
FT_TRACE4(( " get" ));
if ( idx >= 0 && idx < decoder->len_buildchar )
val = decoder->buildchar[idx];
args[0] = val;
args++;
}
break;
case cff_op_store:
FT_TRACE4(( " store "));
goto Unimplemented;
case cff_op_load:
FT_TRACE4(( " load" ));
goto Unimplemented;
case cff_op_dotsection:
/* this operator is deprecated and ignored by the parser */
FT_TRACE4(( " dotsection" ));
break;
case cff_op_and:
{
FT_Fixed cond = args[0] && args[1];
FT_TRACE4(( " and" ));
args[0] = cond ? 0x10000L : 0;
args++;
}
break;
case cff_op_or:
{
FT_Fixed cond = args[0] || args[1];
FT_TRACE4(( " or" ));
args[0] = cond ? 0x10000L : 0;
args++;
}
break;
case cff_op_eq:
{
FT_Fixed cond = !args[0];
FT_TRACE4(( " eq" ));
args[0] = cond ? 0x10000L : 0;
args++;
}
break;
case cff_op_ifelse:
{
FT_Fixed cond = ( args[2] <= args[3] );
FT_TRACE4(( " ifelse" ));
if ( !cond )
args[0] = args[1];
args++;
}
break;
case cff_op_callsubr:
{
FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) +
decoder->locals_bias );
FT_TRACE4(( " callsubr(%d)", idx ));
if ( idx >= decoder->num_locals )
{
FT_ERROR(( "cff_decoder_parse_charstrings:" ));
FT_ERROR(( " invalid local subr index\n" ));
goto Syntax_Error;
}
if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" too many nested subrs\n" ));
goto Syntax_Error;
}
zone->cursor = ip; /* save current instruction pointer */
zone++;
zone->base = decoder->locals[idx];
zone->limit = decoder->locals[idx + 1];
zone->cursor = zone->base;
if ( !zone->base )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" invoking empty subrs!\n" ));
goto Syntax_Error;
}
decoder->zone = zone;
ip = zone->base;
limit = zone->limit;
}
break;
case cff_op_callgsubr:
{
FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) +
decoder->globals_bias );
FT_TRACE4(( " callgsubr(%d)", idx ));
if ( idx >= decoder->num_globals )
{
FT_ERROR(( "cff_decoder_parse_charstrings:" ));
FT_ERROR(( " invalid global subr index\n" ));
goto Syntax_Error;
}
if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" too many nested subrs\n" ));
goto Syntax_Error;
}
zone->cursor = ip; /* save current instruction pointer */
zone++;
zone->base = decoder->globals[idx];
zone->limit = decoder->globals[idx + 1];
zone->cursor = zone->base;
if ( !zone->base )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" invoking empty subrs!\n" ));
goto Syntax_Error;
}
decoder->zone = zone;
ip = zone->base;
limit = zone->limit;
}
break;
case cff_op_return:
FT_TRACE4(( " return" ));
if ( decoder->zone <= decoder->zones )
{
FT_ERROR(( "cff_decoder_parse_charstrings:"
" unexpected return\n" ));
goto Syntax_Error;
}
decoder->zone--;
zone = decoder->zone;
ip = zone->cursor;
limit = zone->limit;
break;
default:
Unimplemented:
FT_ERROR(( "Unimplemented opcode: %d", ip[-1] ));
if ( ip[-1] == 12 )
FT_ERROR(( " %d", ip[0] ));
FT_ERROR(( "\n" ));
return CFF_Err_Unimplemented_Feature;
}
decoder->top = args;
} /* general operator processing */
} /* while ip < limit */
FT_TRACE4(( "..end..\n\n" ));
Fail:
return error;
Syntax_Error:
FT_TRACE4(( "cff_decoder_parse_charstrings: syntax error!" ));
return CFF_Err_Invalid_File_Format;
Stack_Underflow:
FT_TRACE4(( "cff_decoder_parse_charstrings: stack underflow!" ));
return CFF_Err_Too_Few_Arguments;
Stack_Overflow:
FT_TRACE4(( "cff_decoder_parse_charstrings: stack overflow!" ));
return CFF_Err_Stack_Overflow;
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********** *********/
/********** *********/
/********** COMPUTE THE MAXIMUM ADVANCE WIDTH *********/
/********** *********/
/********** The following code is in charge of computing *********/
/********** the maximum advance width of the font. It *********/
/********** quickly processes each glyph charstring to *********/
/********** extract the value from either a `sbw' or `seac' *********/
/********** operator. *********/
/********** *********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
#if 0 /* unused until we support pure CFF fonts */
FT_LOCAL_DEF( FT_Error )
cff_compute_max_advance( TT_Face face,
FT_Int* max_advance )
{
FT_Error error = CFF_Err_Ok;
CFF_Decoder decoder;
FT_Int glyph_index;
CFF_Font cff = (CFF_Font)face->other;
*max_advance = 0;
/* Initialize load decoder */
cff_decoder_init( &decoder, face, 0, 0, 0, 0 );
decoder.builder.metrics_only = 1;
decoder.builder.load_points = 0;
/* For each glyph, parse the glyph charstring and extract */
/* the advance width. */
for ( glyph_index = 0; glyph_index < face->root.num_glyphs;
glyph_index++ )
{
FT_Byte* charstring;
FT_ULong charstring_len;
/* now get load the unscaled outline */
error = cff_get_glyph_data( face, glyph_index,
&charstring, &charstring_len );
if ( !error )
{
cff_decoder_prepare( &decoder, glyph_index );
error = cff_decoder_parse_charstrings( &decoder,
charstring, charstring_len );
cff_free_glyph_data( face, &charstring, &charstring_len );
}
/* ignore the error if one has occurred -- skip to next glyph */
error = CFF_Err_Ok;
}
*max_advance = decoder.builder.advance.x;
return CFF_Err_Ok;
}
#endif /* 0 */
FT_LOCAL_DEF( FT_Error )
cff_slot_load( CFF_GlyphSlot glyph,
CFF_Size size,
FT_UInt glyph_index,
FT_Int32 load_flags )
{
FT_Error error;
CFF_Decoder decoder;
TT_Face face = (TT_Face)glyph->root.face;
FT_Bool hinting;
CFF_Font cff = (CFF_Font)face->extra.data;
FT_Matrix font_matrix;
FT_Vector font_offset;
if ( load_flags & FT_LOAD_NO_RECURSE )
load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING;
glyph->x_scale = 0x10000L;
glyph->y_scale = 0x10000L;
if ( size )
{
glyph->x_scale = size->root.metrics.x_scale;
glyph->y_scale = size->root.metrics.y_scale;
}
#ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS
/* try to load embedded bitmap if any */
/* */
/* XXX: The convention should be emphasized in */
/* the documents because it can be confusing. */
if ( size )
{
CFF_Face cff_face = (CFF_Face)size->root.face;
SFNT_Service sfnt = (SFNT_Service)cff_face->sfnt;
FT_Stream stream = cff_face->root.stream;
if ( size->strike_index != 0xFFFFFFFFUL &&
sfnt->load_eblc &&
( load_flags & FT_LOAD_NO_BITMAP ) == 0 )
{
TT_SBit_MetricsRec metrics;
error = sfnt->load_sbit_image( face,
size->strike_index,
glyph_index,
(FT_Int)load_flags,
stream,
&glyph->root.bitmap,
&metrics );
if ( !error )
{
glyph->root.outline.n_points = 0;
glyph->root.outline.n_contours = 0;
glyph->root.metrics.width = (FT_Pos)metrics.width << 6;
glyph->root.metrics.height = (FT_Pos)metrics.height << 6;
glyph->root.metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6;
glyph->root.metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6;
glyph->root.metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6;
glyph->root.metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6;
glyph->root.metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6;
glyph->root.metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6;
glyph->root.format = FT_GLYPH_FORMAT_BITMAP;
if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
{
glyph->root.bitmap_left = metrics.vertBearingX;
glyph->root.bitmap_top = metrics.vertBearingY;
}
else
{
glyph->root.bitmap_left = metrics.horiBearingX;
glyph->root.bitmap_top = metrics.horiBearingY;
}
return error;
}
}
}
#endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */
/* return immediately if we only want the embedded bitmaps */
if ( load_flags & FT_LOAD_SBITS_ONLY )
return CFF_Err_Invalid_Argument;
glyph->root.outline.n_points = 0;
glyph->root.outline.n_contours = 0;
hinting = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 &&
( load_flags & FT_LOAD_NO_HINTING ) == 0 );
glyph->root.format = FT_GLYPH_FORMAT_OUTLINE; /* by default */
{
FT_Byte* charstring;
FT_ULong charstring_len;
/* in a CID-keyed font, consider `glyph_index' as a CID and map */
/* it immediately to the real glyph_index -- if it isn't a */
/* subsetted font, glyph_indices and CIDs are identical, though */
if ( cff->top_font.font_dict.cid_registry != 0xFFFFU &&
cff->charset.cids )
{
if ( glyph_index < cff->charset.max_cid )
glyph_index = cff->charset.cids[glyph_index];
else
glyph_index = 0;
}
cff_decoder_init( &decoder, face, size, glyph, hinting,
FT_LOAD_TARGET_MODE( load_flags ) );
decoder.builder.no_recurse =
(FT_Bool)( ( load_flags & FT_LOAD_NO_RECURSE ) != 0 );
/* now load the unscaled outline */
error = cff_get_glyph_data( face, glyph_index,
&charstring, &charstring_len );
if ( !error )
{
cff_decoder_prepare( &decoder, glyph_index );
error = cff_decoder_parse_charstrings( &decoder,
charstring, charstring_len );
cff_free_glyph_data( face, &charstring, charstring_len );
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* Control data and length may not be available for incremental */
/* fonts. */
if ( face->root.internal->incremental_interface )
{
glyph->root.control_data = 0;
glyph->root.control_len = 0;
}
else
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
/* We set control_data and control_len if charstrings is loaded. */
/* See how charstring loads at cff_index_access_element() in */
/* cffload.c. */
{
CFF_IndexRec csindex = cff->charstrings_index;
glyph->root.control_data =
csindex.bytes + csindex.offsets[glyph_index] - 1;
glyph->root.control_len =
charstring_len;
}
}
/* save new glyph tables */
cff_builder_done( &decoder.builder );
}
#ifdef FT_CONFIG_OPTION_INCREMENTAL
/* Incremental fonts can optionally override the metrics. */
if ( !error &&
face->root.internal->incremental_interface &&
face->root.internal->incremental_interface->funcs->get_glyph_metrics )
{
FT_Incremental_MetricsRec metrics;
metrics.bearing_x = decoder.builder.left_bearing.x;
metrics.bearing_y = decoder.builder.left_bearing.y;
metrics.advance = decoder.builder.advance.x;
error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
face->root.internal->incremental_interface->object,
glyph_index, FALSE, &metrics );
decoder.builder.left_bearing.x = metrics.bearing_x;
decoder.builder.left_bearing.y = metrics.bearing_y;
decoder.builder.advance.x = metrics.advance;
decoder.builder.advance.y = 0;
}
#endif /* FT_CONFIG_OPTION_INCREMENTAL */
if ( cff->num_subfonts >= 1 )
{
FT_Byte fd_index = cff_fd_select_get( &cff->fd_select, glyph_index );
font_matrix = cff->subfonts[fd_index]->font_dict.font_matrix;
font_offset = cff->subfonts[fd_index]->font_dict.font_offset;
}
else
{
font_matrix = cff->top_font.font_dict.font_matrix;
font_offset = cff->top_font.font_dict.font_offset;
}
/* Now, set the metrics -- this is rather simple, as */
/* the left side bearing is the xMin, and the top side */
/* bearing the yMax. */
if ( !error )
{
/* For composite glyphs, return only left side bearing and */
/* advance width. */
if ( load_flags & FT_LOAD_NO_RECURSE )
{
FT_Slot_Internal internal = glyph->root.internal;
glyph->root.metrics.horiBearingX = decoder.builder.left_bearing.x;
glyph->root.metrics.horiAdvance = decoder.glyph_width;
internal->glyph_matrix = font_matrix;
internal->glyph_delta = font_offset;
internal->glyph_transformed = 1;
}
else
{
FT_BBox cbox;
FT_Glyph_Metrics* metrics = &glyph->root.metrics;
FT_Vector advance;
FT_Bool has_vertical_info;
/* copy the _unscaled_ advance width */
metrics->horiAdvance = decoder.glyph_width;
glyph->root.linearHoriAdvance = decoder.glyph_width;
glyph->root.internal->glyph_transformed = 0;
has_vertical_info = FT_BOOL( face->vertical_info &&
face->vertical.number_Of_VMetrics > 0 &&
face->vertical.long_metrics != 0 );
/* get the vertical metrics from the vtmx table if we have one */
if ( has_vertical_info )
{
FT_Short vertBearingY = 0;
FT_UShort vertAdvance = 0;
( (SFNT_Service)face->sfnt )->get_metrics( face, 1,
glyph_index,
&vertBearingY,
&vertAdvance );
metrics->vertBearingY = vertBearingY;
metrics->vertAdvance = vertAdvance;
}
else
{
/* make up vertical ones */
if ( face->os2.version != 0xFFFFU )
metrics->vertAdvance = (FT_Pos)( face->os2.sTypoAscender -
face->os2.sTypoDescender );
else
metrics->vertAdvance = (FT_Pos)( face->horizontal.Ascender -
face->horizontal.Descender );
}
glyph->root.linearVertAdvance = metrics->vertAdvance;
glyph->root.format = FT_GLYPH_FORMAT_OUTLINE;
glyph->root.outline.flags = 0;
if ( size && size->root.metrics.y_ppem < 24 )
glyph->root.outline.flags |= FT_OUTLINE_HIGH_PRECISION;
glyph->root.outline.flags |= FT_OUTLINE_REVERSE_FILL;
/* apply the font matrix */
FT_Outline_Transform( &glyph->root.outline, &font_matrix );
FT_Outline_Translate( &glyph->root.outline,
font_offset.x,
font_offset.y );
advance.x = metrics->horiAdvance;
advance.y = 0;
FT_Vector_Transform( &advance, &font_matrix );
metrics->horiAdvance = advance.x + font_offset.x;
advance.x = 0;
advance.y = metrics->vertAdvance;
FT_Vector_Transform( &advance, &font_matrix );
metrics->vertAdvance = advance.y + font_offset.y;
if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 )
{
/* scale the outline and the metrics */
FT_Int n;
FT_Outline* cur = &glyph->root.outline;
FT_Vector* vec = cur->points;
FT_Fixed x_scale = glyph->x_scale;
FT_Fixed y_scale = glyph->y_scale;
/* First of all, scale the points */
if ( !hinting || !decoder.builder.hints_funcs )
for ( n = cur->n_points; n > 0; n--, vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
/* Then scale the metrics */
metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale );
metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale );
}
/* compute the other metrics */
FT_Outline_Get_CBox( &glyph->root.outline, &cbox );
metrics->width = cbox.xMax - cbox.xMin;
metrics->height = cbox.yMax - cbox.yMin;
metrics->horiBearingX = cbox.xMin;
metrics->horiBearingY = cbox.yMax;
if ( has_vertical_info )
metrics->vertBearingX = -metrics->width / 2;
else
ft_synthesize_vertical_metrics( metrics,
metrics->vertAdvance );
}
}
return error;
}
/* END */