ref: 9e7748f55c971ae97399da544596f70feaee74d9
dir: /include/freetype/ftoutln.h/
/***************************************************************************/ /* */ /* ftoutln.h */ /* */ /* Support for the FT_Outline type used to store glyph shapes of */ /* most scalable font formats (specification). */ /* */ /* Copyright 1996-2016 by */ /* David Turner, Robert Wilhelm, and Werner Lemberg. */ /* */ /* This file is part of the FreeType project, and may only be used, */ /* modified, and distributed under the terms of the FreeType project */ /* license, LICENSE.TXT. By continuing to use, modify, or distribute */ /* this file you indicate that you have read the license and */ /* understand and accept it fully. */ /* */ /***************************************************************************/ #ifndef FTOUTLN_H_ #define FTOUTLN_H_ #include <ft2build.h> #include FT_FREETYPE_H #ifdef FREETYPE_H #error "freetype.h of FreeType 1 has been loaded!" #error "Please fix the directory search order for header files" #error "so that freetype.h of FreeType 2 is found first." #endif FT_BEGIN_HEADER /*************************************************************************/ /* */ /* <Section> */ /* outline_processing */ /* */ /* <Title> */ /* Outline Processing */ /* */ /* <Abstract> */ /* Functions to create, transform, and render vectorial glyph images. */ /* */ /* <Description> */ /* This section contains routines used to create and destroy scalable */ /* glyph images known as `outlines'. These can also be measured, */ /* transformed, and converted into bitmaps and pixmaps. */ /* */ /* <Order> */ /* FT_Outline */ /* FT_Outline_New */ /* FT_Outline_Done */ /* FT_Outline_Copy */ /* FT_Outline_Translate */ /* FT_Outline_Transform */ /* FT_Outline_Embolden */ /* FT_Outline_EmboldenXY */ /* FT_Outline_Reverse */ /* FT_Outline_Check */ /* */ /* FT_Outline_Get_CBox */ /* FT_Outline_Get_BBox */ /* */ /* FT_Outline_Get_Bitmap */ /* FT_Outline_Render */ /* FT_Outline_Decompose */ /* FT_Outline_Funcs */ /* FT_Outline_MoveToFunc */ /* FT_Outline_LineToFunc */ /* FT_Outline_ConicToFunc */ /* FT_Outline_CubicToFunc */ /* */ /* FT_Orientation */ /* FT_Outline_Get_Orientation */ /* */ /* FT_OUTLINE_XXX */ /* */ /*************************************************************************/ /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Decompose */ /* */ /* <Description> */ /* Walk over an outline's structure to decompose it into individual */ /* segments and Bézier arcs. This function also emits `move to' */ /* operations to indicate the start of new contours in the outline. */ /* */ /* <Input> */ /* outline :: A pointer to the source target. */ /* */ /* func_interface :: A table of `emitters', i.e., function pointers */ /* called during decomposition to indicate path */ /* operations. */ /* */ /* <InOut> */ /* user :: A typeless pointer that is passed to each */ /* emitter during the decomposition. It can be */ /* used to store the state during the */ /* decomposition. */ /* */ /* <Return> */ /* FreeType error code. 0~means success. */ /* */ /* <Note> */ /* A contour that contains a single point only is represented by a */ /* `move to' operation followed by `line to' to the same point. In */ /* most cases, it is best to filter this out before using the */ /* outline for stroking purposes (otherwise it would result in a */ /* visible dot when round caps are used). */ /* */ /* Similarly, the function returns success for an empty outline also */ /* (doing nothing, this is, not calling any emitter); if necessary, */ /* you should filter this out, too. */ /* */ FT_EXPORT( FT_Error ) FT_Outline_Decompose( FT_Outline* outline, const FT_Outline_Funcs* func_interface, void* user ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_New */ /* */ /* <Description> */ /* Create a new outline of a given size. */ /* */ /* <Input> */ /* library :: A handle to the library object from where the */ /* outline is allocated. Note however that the new */ /* outline will *not* necessarily be *freed*, when */ /* destroying the library, by @FT_Done_FreeType. */ /* */ /* numPoints :: The maximum number of points within the outline. */ /* Must be smaller than or equal to 0xFFFF (65535). */ /* */ /* numContours :: The maximum number of contours within the outline. */ /* This value must be in the range 0 to `numPoints'. */ /* */ /* <Output> */ /* anoutline :: A handle to the new outline. */ /* */ /* <Return> */ /* FreeType error code. 0~means success. */ /* */ /* <Note> */ /* The reason why this function takes a `library' parameter is simply */ /* to use the library's memory allocator. */ /* */ FT_EXPORT( FT_Error ) FT_Outline_New( FT_Library library, FT_UInt numPoints, FT_Int numContours, FT_Outline *anoutline ); FT_EXPORT( FT_Error ) FT_Outline_New_Internal( FT_Memory memory, FT_UInt numPoints, FT_Int numContours, FT_Outline *anoutline ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Done */ /* */ /* <Description> */ /* Destroy an outline created with @FT_Outline_New. */ /* */ /* <Input> */ /* library :: A handle of the library object used to allocate the */ /* outline. */ /* */ /* outline :: A pointer to the outline object to be discarded. */ /* */ /* <Return> */ /* FreeType error code. 0~means success. */ /* */ /* <Note> */ /* If the outline's `owner' field is not set, only the outline */ /* descriptor will be released. */ /* */ /* The reason why this function takes an `library' parameter is */ /* simply to use ft_mem_free(). */ /* */ FT_EXPORT( FT_Error ) FT_Outline_Done( FT_Library library, FT_Outline* outline ); FT_EXPORT( FT_Error ) FT_Outline_Done_Internal( FT_Memory memory, FT_Outline* outline ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Check */ /* */ /* <Description> */ /* Check the contents of an outline descriptor. */ /* */ /* <Input> */ /* outline :: A handle to a source outline. */ /* */ /* <Return> */ /* FreeType error code. 0~means success. */ /* */ /* <Note> */ /* An empty outline, or an outline with a single point only is also */ /* valid. */ /* */ FT_EXPORT( FT_Error ) FT_Outline_Check( FT_Outline* outline ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Get_CBox */ /* */ /* <Description> */ /* Return an outline's `control box'. The control box encloses all */ /* the outline's points, including Bézier control points. Though it */ /* coincides with the exact bounding box for most glyphs, it can be */ /* slightly larger in some situations (like when rotating an outline */ /* that contains Bézier outside arcs). */ /* */ /* Computing the control box is very fast, while getting the bounding */ /* box can take much more time as it needs to walk over all segments */ /* and arcs in the outline. To get the latter, you can use the */ /* `ftbbox' component, which is dedicated to this single task. */ /* */ /* <Input> */ /* outline :: A pointer to the source outline descriptor. */ /* */ /* <Output> */ /* acbox :: The outline's control box. */ /* */ /* <Note> */ /* See @FT_Glyph_Get_CBox for a discussion of tricky fonts. */ /* */ FT_EXPORT( void ) FT_Outline_Get_CBox( const FT_Outline* outline, FT_BBox *acbox ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Translate */ /* */ /* <Description> */ /* Apply a simple translation to the points of an outline. */ /* */ /* <InOut> */ /* outline :: A pointer to the target outline descriptor. */ /* */ /* <Input> */ /* xOffset :: The horizontal offset. */ /* */ /* yOffset :: The vertical offset. */ /* */ FT_EXPORT( void ) FT_Outline_Translate( const FT_Outline* outline, FT_Pos xOffset, FT_Pos yOffset ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Copy */ /* */ /* <Description> */ /* Copy an outline into another one. Both objects must have the */ /* same sizes (number of points & number of contours) when this */ /* function is called. */ /* */ /* <Input> */ /* source :: A handle to the source outline. */ /* */ /* <Output> */ /* target :: A handle to the target outline. */ /* */ /* <Return> */ /* FreeType error code. 0~means success. */ /* */ FT_EXPORT( FT_Error ) FT_Outline_Copy( const FT_Outline* source, FT_Outline *target ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Transform */ /* */ /* <Description> */ /* Apply a simple 2x2 matrix to all of an outline's points. Useful */ /* for applying rotations, slanting, flipping, etc. */ /* */ /* <InOut> */ /* outline :: A pointer to the target outline descriptor. */ /* */ /* <Input> */ /* matrix :: A pointer to the transformation matrix. */ /* */ /* <Note> */ /* You can use @FT_Outline_Translate if you need to translate the */ /* outline's points. */ /* */ FT_EXPORT( void ) FT_Outline_Transform( const FT_Outline* outline, const FT_Matrix* matrix ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Embolden */ /* */ /* <Description> */ /* Embolden an outline. The new outline will be at most 4~times */ /* `strength' pixels wider and higher. You may think of the left and */ /* bottom borders as unchanged. */ /* */ /* Negative `strength' values to reduce the outline thickness are */ /* possible also. */ /* */ /* <InOut> */ /* outline :: A handle to the target outline. */ /* */ /* <Input> */ /* strength :: How strong the glyph is emboldened. Expressed in */ /* 26.6 pixel format. */ /* */ /* <Return> */ /* FreeType error code. 0~means success. */ /* */ /* <Note> */ /* The used algorithm to increase or decrease the thickness of the */ /* glyph doesn't change the number of points; this means that certain */ /* situations like acute angles or intersections are sometimes */ /* handled incorrectly. */ /* */ /* If you need `better' metrics values you should call */ /* @FT_Outline_Get_CBox or @FT_Outline_Get_BBox. */ /* */ /* Example call: */ /* */ /* { */ /* FT_Load_Glyph( face, index, FT_LOAD_DEFAULT ); */ /* if ( face->glyph->format == FT_GLYPH_FORMAT_OUTLINE ) */ /* FT_Outline_Embolden( &face->glyph->outline, strength ); */ /* } */ /* */ /* To get meaningful results, font scaling values must be set with */ /* functions like @FT_Set_Char_Size before calling FT_Render_Glyph. */ /* */ FT_EXPORT( FT_Error ) FT_Outline_Embolden( FT_Outline* outline, FT_Pos strength ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_EmboldenXY */ /* */ /* <Description> */ /* Embolden an outline. The new outline will be `xstrength' pixels */ /* wider and `ystrength' pixels higher. Otherwise, it is similar to */ /* @FT_Outline_Embolden, which uses the same strength in both */ /* directions. */ /* */ FT_EXPORT( FT_Error ) FT_Outline_EmboldenXY( FT_Outline* outline, FT_Pos xstrength, FT_Pos ystrength ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Reverse */ /* */ /* <Description> */ /* Reverse the drawing direction of an outline. This is used to */ /* ensure consistent fill conventions for mirrored glyphs. */ /* */ /* <InOut> */ /* outline :: A pointer to the target outline descriptor. */ /* */ /* <Note> */ /* This function toggles the bit flag @FT_OUTLINE_REVERSE_FILL in */ /* the outline's `flags' field. */ /* */ /* It shouldn't be used by a normal client application, unless it */ /* knows what it is doing. */ /* */ FT_EXPORT( void ) FT_Outline_Reverse( FT_Outline* outline ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Get_Bitmap */ /* */ /* <Description> */ /* Render an outline within a bitmap. The outline's image is simply */ /* OR-ed to the target bitmap. */ /* */ /* <Input> */ /* library :: A handle to a FreeType library object. */ /* */ /* outline :: A pointer to the source outline descriptor. */ /* */ /* <InOut> */ /* abitmap :: A pointer to the target bitmap descriptor. */ /* */ /* <Return> */ /* FreeType error code. 0~means success. */ /* */ /* <Note> */ /* This function does NOT CREATE the bitmap, it only renders an */ /* outline image within the one you pass to it! Consequently, the */ /* various fields in `abitmap' should be set accordingly. */ /* */ /* It will use the raster corresponding to the default glyph format. */ /* */ /* The value of the `num_grays' field in `abitmap' is ignored. If */ /* you select the gray-level rasterizer, and you want less than 256 */ /* gray levels, you have to use @FT_Outline_Render directly. */ /* */ FT_EXPORT( FT_Error ) FT_Outline_Get_Bitmap( FT_Library library, FT_Outline* outline, const FT_Bitmap *abitmap ); /*************************************************************************/ /* */ /* <Function> */ /* FT_Outline_Render */ /* */ /* <Description> */ /* Render an outline within a bitmap using the current scan-convert. */ /* This function uses an @FT_Raster_Params structure as an argument, */ /* allowing advanced features like direct composition, translucency, */ /* etc. */ /* */ /* <Input> */ /* library :: A handle to a FreeType library object. */ /* */ /* outline :: A pointer to the source outline descriptor. */ /* */ /* <InOut> */ /* params :: A pointer to an @FT_Raster_Params structure used to */ /* describe the rendering operation. */ /* */ /* <Return> */ /* FreeType error code. 0~means success. */ /* */ /* <Note> */ /* You should know what you are doing and how @FT_Raster_Params works */ /* to use this function. */ /* */ /* The field `params.source' will be set to `outline' before the scan */ /* converter is called, which means that the value you give to it is */ /* actually ignored. */ /* */ /* The gray-level rasterizer always uses 256 gray levels. If you */ /* want less gray levels, you have to provide your own span callback. */ /* See the @FT_RASTER_FLAG_DIRECT value of the `flags' field in the */ /* @FT_Raster_Params structure for more details. */ /* */ FT_EXPORT( FT_Error ) FT_Outline_Render( FT_Library library, FT_Outline* outline, FT_Raster_Params* params ); /************************************************************************** * * @enum: * FT_Orientation * * @description: * A list of values used to describe an outline's contour orientation. * * The TrueType and PostScript specifications use different conventions * to determine whether outline contours should be filled or unfilled. * * @values: * FT_ORIENTATION_TRUETYPE :: * According to the TrueType specification, clockwise contours must * be filled, and counter-clockwise ones must be unfilled. * * FT_ORIENTATION_POSTSCRIPT :: * According to the PostScript specification, counter-clockwise contours * must be filled, and clockwise ones must be unfilled. * * FT_ORIENTATION_FILL_RIGHT :: * This is identical to @FT_ORIENTATION_TRUETYPE, but is used to * remember that in TrueType, everything that is to the right of * the drawing direction of a contour must be filled. * * FT_ORIENTATION_FILL_LEFT :: * This is identical to @FT_ORIENTATION_POSTSCRIPT, but is used to * remember that in PostScript, everything that is to the left of * the drawing direction of a contour must be filled. * * FT_ORIENTATION_NONE :: * The orientation cannot be determined. That is, different parts of * the glyph have different orientation. * */ typedef enum FT_Orientation_ { FT_ORIENTATION_TRUETYPE = 0, FT_ORIENTATION_POSTSCRIPT = 1, FT_ORIENTATION_FILL_RIGHT = FT_ORIENTATION_TRUETYPE, FT_ORIENTATION_FILL_LEFT = FT_ORIENTATION_POSTSCRIPT, FT_ORIENTATION_NONE } FT_Orientation; /************************************************************************** * * @function: * FT_Outline_Get_Orientation * * @description: * This function analyzes a glyph outline and tries to compute its * fill orientation (see @FT_Orientation). This is done by integrating * the total area covered by the outline. The positive integral * corresponds to the clockwise orientation and @FT_ORIENTATION_POSTSCRIPT * is returned. The negative integral corresponds to the counter-clockwise * orientation and @FT_ORIENTATION_TRUETYPE is returned. * * Note that this will return @FT_ORIENTATION_TRUETYPE for empty * outlines. * * @input: * outline :: * A handle to the source outline. * * @return: * The orientation. * */ FT_EXPORT( FT_Orientation ) FT_Outline_Get_Orientation( FT_Outline* outline ); /* */ FT_END_HEADER #endif /* FTOUTLN_H_ */ /* END */ /* Local Variables: */ /* coding: utf-8 */ /* End: */