ref: 93ac3e398587c1a1e728e960588bce4378833835
dir: /src/type1/t1hinter.c/
/***************************************************************************/
/* */
/* t1hinter.c */
/* */
/* Type 1 hinter (body). */
/* */
/* Copyright 1996-2000 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
/*************************************************************************/
/* */
/* The Hinter is in charge of fitting th scaled outline to the pixel */
/* grid in order to considerably improve the quality of the Type 1 font */
/* driver's output. */
/* */
/*************************************************************************/
#include <freetype/internal/ftdebug.h>
#ifdef FT_FLAT_COMPILE
#include "t1objs.h"
#include "t1hinter.h"
#else
#include <type1/t1objs.h>
#include <type1/t1hinter.h>
#endif
/*************************************************************************/
/* */
/* The macro FT_COMPONENT is used in trace mode. It is an implicit */
/* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
/* messages during execution. */
/* */
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1hint
#undef ONE_PIXEL
#define ONE_PIXEL 64
#undef ROUND
#define ROUND( x ) ( ( x + ONE_PIXEL / 2 ) & -ONE_PIXEL )
#undef SCALE
#define SCALE( val ) FT_MulFix( val, scale )
/* various constants used to describe the alignment of a horizontal */
/* stem with regards to the blue zones */
#define T1_ALIGN_NONE 0
#define T1_ALIGN_BOTTOM 1
#define T1_ALIGN_TOP 2
#define T1_ALIGN_BOTH 3
/* very simple bubble sort (not a lot of elements, mostly */
/* pre-sorted, no need for quicksort) */
static
void t1_sort_blues( FT_Int* blues,
FT_Int count )
{
FT_Int i, swap;
FT_Int* cur;
for ( i = 2; i < count; i += 2 )
{
cur = blues + i;
do
{
if ( cur[-1] < cur[0] )
break;
swap = cur[-2]; cur[-2] = cur[0]; cur[0] = swap;
swap = cur[-1]; cur[-1] = cur[1]; cur[1] = swap;
cur -= 2;
} while ( cur > blues );
}
}
/*************************************************************************/
/* */
/* <Function> */
/* t1_set_blue_zones */
/* */
/* <Description> */
/* Sets a size object's blue zones during reset. This will compute */
/* the `snap' zone corresponding to each blue zone. */
/* */
/* <InOut> */
/* size :: A handle to target size object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* This functions does the following: */
/* */
/* 1. It extracts the bottom and top blue zones from the face object. */
/* */
/* 2. Each zone is then grown by `BlueFuzz', overlapping is */
/* eliminated by adjusting the zone edges appropriately. */
/* */
/* 3. For each zone, we keep its original font units position, its */
/* original scaled position, as well as its grown/adjusted edges. */
/* */
static
FT_Error t1_set_blue_zones( T1_Size size )
{
T1_Face face = (T1_Face)size->root.face;
T1_Private* priv = &face->type1.private_dict;
FT_Int n;
FT_Int blues[24];
FT_Int num_bottom;
FT_Int num_top;
FT_Int num_blues;
T1_Size_Hints* hints = size->hints;
T1_Snap_Zone* zone;
FT_Pos pix, orus;
FT_Pos min, max, threshold;
FT_Fixed scale;
FT_Bool is_bottom;
/***********************************************************************/
/* */
/* copy bottom and top blue zones in local arrays */
/* */
/* First of all, check the sizes of the /BlueValues and /OtherBlues */
/* tables. They all must contain an even number of arguments. */
if ( priv->num_other_blues & 1 ||
priv->num_blue_values & 1 )
{
FT_ERROR(( "t1_set_blue_zones: odd number of blue values\n" ));
return T1_Err_Syntax_Error;
}
/* copy the bottom blue zones from /OtherBlues */
num_top = 0;
num_bottom = priv->num_other_blues;
for ( n = 0; n < num_bottom; n++ )
blues[n] = priv->other_blues[n];
/* add the first blue zone in /BlueValues to the table */
num_top = priv->num_blue_values - 2;
if ( num_top >= 0 )
{
blues[num_bottom ] = priv->blue_values[0];
blues[num_bottom + 1] = priv->blue_values[1];
num_bottom += 2;
}
/* sort the bottom blue zones */
t1_sort_blues( blues, num_bottom );
hints->num_bottom_zones = num_bottom >> 1;
/* now copy the /BlueValues to the top of the blues array */
if ( num_top > 0 )
{
for ( n = 0; n < num_top; n++ )
blues[num_bottom + n] = priv->blue_values[n + 2];
/* sort the top blue zones */
t1_sort_blues( blues + num_bottom, num_top );
}
else
num_top = 0;
num_blues = num_top + num_bottom;
hints->num_blue_zones = ( num_blues ) >> 1;
/***********************************************************************/
/* */
/* build blue snap zones from the local blues arrays */
/* */
scale = size->root.metrics.y_scale;
zone = hints->blue_zones;
threshold = ONE_PIXEL / 4; /* 0.25 pixels */
for ( n = 0; n < num_blues; n += 2, zone++ )
{
is_bottom = n < num_bottom ? 1 : 0;
orus = blues[n + is_bottom]; /* get alignement coordinate */
pix = SCALE( orus ); /* scale it */
min = SCALE( blues[n ] - priv->blue_fuzz );
max = SCALE( blues[n + 1] + priv->blue_fuzz );
if ( min > pix - threshold )
min = pix - threshold;
if ( max < pix + threshold )
max = pix + threshold;
zone->orus = orus;
zone->pix = pix;
zone->min = min;
zone->max = max;
}
/* adjust edges in case of overlap */
zone = hints->blue_zones;
for ( n = 0; n < num_blues - 2; n += 2, zone++ )
{
if ( n != num_bottom - 2 &&
zone[0].max > zone[1].min )
zone[0].max = zone[1].min = ( zone[0].pix + zone[1].pix ) / 2;
}
/* compare the current pixel size with the BlueScale value */
/* to know whether to supress overshoots */
hints->supress_overshoots =
size->root.metrics.y_ppem < FT_MulFix( 1000, priv->blue_scale );
#ifdef FT_DEBUG_LEVEL_TRACE
/* now print the new blue values in tracing mode */
FT_TRACE2(( "Blue Zones for size object at $%08lx:\n", (long)size ));
FT_TRACE2(( " orus pix min max\n" ));
FT_TRACE2(( "-------------------------------\n" ));
zone = hints->blue_zones;
for ( n = 0; n < hints->num_blue_zones; n++ )
{
FT_TRACE2(( " %3d %.2f %.2f %.2f\n",
zone->orus,
zone->pix / 64.0,
zone->min / 64.0,
zone->max / 64.0 ));
zone++;
}
FT_TRACE2(( "\nOvershoots are %s\n\n",
hints->supress_overshoots ? "supressed" : "active" ));
#endif /* DEBUG_LEVEL_TRACE */
return T1_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* t1_set_snap_zones */
/* */
/* <Description> */
/* This function set a size object's stem snap zones. */
/* */
/* <InOut> */
/* size :: A handle to the target size object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
/* <Note> */
/* This function performs the following: */
/* */
/* 1. It reads and scales the stem snap widths from the parent face. */
/* */
/* 2. A `snap zone' is computed for each snap width, by `growing' it */
/* with a threshold of 1/2 pixel. Overlapping is avoided through */
/* proper edge adjustment. */
/* */
/* 3. Each width whose zone contain the scaled standard set width is */
/* removed from the table. */
/* */
/* 4. Finally, the standard set width is scaled, and its correponding */
/* `snap zone' is inserted into the sorted snap zones table. */
/* */
static
FT_Error t1_set_snap_zones( T1_Size size )
{
FT_Int n, direction, n_zones, num_zones;
T1_Snap_Zone* zone;
T1_Snap_Zone* base_zone;
FT_Short* orgs;
FT_Pos standard_width;
FT_Fixed scale;
T1_Face face = (T1_Face)size->root.face;
T1_Private* priv = &face->type1.private_dict;
T1_Size_Hints* hints = size->hints;
/* start with horizontal snap zones */
direction = 0;
standard_width = priv->standard_width[0];
n_zones = priv->num_snap_widths;
base_zone = hints->snap_widths;
orgs = priv->snap_widths;
scale = size->root.metrics.x_scale;
while ( direction < 2 )
{
/*********************************************************************/
/* */
/* Read and scale stem snap widths table from the physical font */
/* record. */
/* */
FT_Pos prev, orus, pix, min, max, threshold;
threshold = ONE_PIXEL / 4;
zone = base_zone;
if ( n_zones > 0 )
{
orus = *orgs++;
pix = SCALE( orus );
min = pix - threshold;
max = pix + threshold;
zone->orus = orus;
zone->pix = pix;
zone->min = min;
prev = pix;
for ( n = 1; n < n_zones; n++ )
{
orus = *orgs++;
pix = SCALE( orus );
if ( pix - prev < 2 * threshold )
{
min = max = ( pix + prev ) / 2;
}
else
min = pix - threshold;
zone->max = max;
zone++;
zone->orus = orus;
zone->pix = pix;
zone->min = min;
max = pix + threshold;
prev = pix;
}
zone->max = max;
}
#ifdef FT_DEBUG_LEVEL_TRACE
/* print the scaled stem snap values in tracing mode */
FT_TRACE2(( "Set_Snap_Zones: first %s pass\n",
direction ? "vertical" : "horizontal" ));
FT_TRACE2(( "Scaled original stem snap zones:\n" ));
FT_TRACE2(( " orus pix min max\n" ));
FT_TRACE2(( "-----------------------------\n" ));
zone = base_zone;
for ( n = 0; n < n_zones; n++, zone++ )
FT_TRACE2(( " %3d %.2f %.2f %.2f\n",
zone->orus,
zone->pix / 64.0,
zone->min / 64.0,
zone->max / 64.0 ));
FT_TRACE2(( "\n" ));
FT_TRACE2(( "Standard width = %d\n", standard_width ));
#endif /* FT_DEBUG_LEVEL_TRACE */
/*********************************************************************/
/* */
/* Now, each snap width which is in the range of the standard set */
/* width will be removed from the list. */
/* */
if ( standard_width > 0 )
{
T1_Snap_Zone* parent;
FT_Pos std_pix, std_min, std_max;
std_pix = SCALE( standard_width );
std_min = std_pix - threshold;
std_max = std_pix + threshold;
num_zones = 0;
zone = base_zone;
parent = base_zone;
for ( n = 0; n < n_zones; n++ )
{
if ( zone->pix >= std_min && zone->pix <= std_max )
{
/* this zone must be removed from the list */
if ( std_min > zone->min )
std_min = zone->min;
if ( std_max < zone->max )
std_max = zone->max;
}
else
{
*parent++ = *zone;
num_zones++;
}
zone++;
}
/*******************************************************************/
/* */
/* Now, insert the standard width zone */
/* */
zone = base_zone + num_zones;
while ( zone > base_zone && zone[-1].pix > std_max )
{
zone[0] = zone[-1];
zone--;
}
/* check border zones */
if ( zone > base_zone && zone[-1].max > std_min )
zone[-1].max = std_min;
if ( zone < base_zone + num_zones && zone[1].min < std_max )
zone[1].min = std_max;
zone->orus = standard_width;
zone->pix = std_pix;
zone->min = std_min;
zone->max = std_max;
num_zones++;
}
else
num_zones = n_zones;
/* save total number of stem snaps now */
if ( direction )
hints->num_snap_heights = num_zones;
else
hints->num_snap_widths = num_zones;
#ifdef FT_DEBUG_LEVEL_TRACE
/* print the scaled stem snap values in tracing mode */
FT_TRACE2(( "Set_Snap_Zones: second %s pass\n",
direction ? "vertical" : "horizontal" ));
FT_TRACE2(( "Scaled clipped stem snap zones:\n" ));
FT_TRACE2(( " orus pix min max\n" ));
FT_TRACE2(( "-----------------------------\n" ));
zone = base_zone;
for ( n = 0; n < num_zones; n++, zone++ )
FT_TRACE2(( " %3d %.2f %.2f %.2f\n",
zone->orus,
zone->pix / 64.0,
zone->min / 64.0,
zone->max / 64.0 ));
FT_TRACE2(( "\n" ));
FT_TRACE2(( "Standard width = %d\n", standard_width ));
#endif /* FT_DEBUG_LEVEL_TRACE */
/* continue with vertical snap zone */
direction++;
standard_width = priv->standard_height[0];
n_zones = priv->num_snap_heights;
base_zone = hints->snap_heights;
orgs = priv->snap_heights;
scale = size->root.metrics.y_scale;
}
return T1_Err_Ok;
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_New_Size_Hinter */
/* */
/* <Description> */
/* Allocates a new hinter structure for a given size object. */
/* */
/* <InOut> */
/* size :: A handle to the target size object. */
/* */
/* <Return> */
/* FreeType Error code. 0 means success. */
/* */
LOCAL_FUNC
FT_Error T1_New_Size_Hinter( T1_Size size )
{
FT_Memory memory = size->root.face->memory;
return MEM_Alloc( size->hints, sizeof ( *size->hints ) );
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_Done_Size_Hinter */
/* */
/* <Description> */
/* Releases a given size object's hinter structure. */
/* */
/* <Input> */
/* size :: A handle to the target size object. */
/* */
LOCAL_FUNC
void T1_Done_Size_Hinter( T1_Size size )
{
FT_Memory memory = size->root.face->memory;
FREE( size->hints );
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_Reset_Size_Hinter */
/* */
/* <Description> */
/* Recomputes hinting information when a given size object has */
/* changed its resolutions/char sizes/pixel sizes. */
/* */
/* <InOut> */
/* size :: A handle to the size object. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
LOCAL_FUNC
FT_Error T1_Reset_Size_Hinter( T1_Size size )
{
return t1_set_blue_zones( size ) || t1_set_snap_zones( size );
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_New_Glyph_Hinter */
/* */
/* <Description> */
/* Allocates a new hinter structure for a given glyph slot. */
/* */
/* <InOut> */
/* glyph :: A handle to the target glyph slot. */
/* */
/* <Return> */
/* FreeType error code. 0 means success. */
/* */
LOCAL_FUNC
FT_Error T1_New_Glyph_Hinter( T1_GlyphSlot glyph )
{
FT_Memory memory = glyph->root.face->memory;
return MEM_Alloc( glyph->hints, sizeof ( *glyph->hints ) );
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_Done_Glyph_Hinter */
/* */
/* <Description> */
/* Releases a given glyph slot's hinter structure. */
/* */
/* <Input> */
/* glyph :: A handle to the glyph slot. */
/* */
LOCAL_FUNC
void T1_Done_Glyph_Hinter( T1_GlyphSlot glyph )
{
FT_Memory memory = glyph->root.face->memory;
FREE( glyph->hints );
}
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********** **********/
/********** HINTED GLYPH LOADER **********/
/********** **********/
/********** The following code is in charge of the first **********/
/********** and second pass when loading a single outline **********/
/********** **********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
static
FT_Error t1_hinter_ignore( void )
{
/* do nothing, used for `dotsection' which is unsupported for now */
return 0;
}
static
FT_Error t1_hinter_stem( T1_Builder* builder,
FT_Pos pos,
FT_Int width,
FT_Bool vertical )
{
T1_Stem_Table* stem_table;
T1_Stem_Hint* stems;
T1_Stem_Hint* cur_stem;
FT_Int min, max, n, num_stems;
FT_Bool new_stem;
T1_Glyph_Hints* hinter = builder->glyph->hints;
/* select the appropriate stem array */
stem_table = vertical ? &hinter->vert_stems : &hinter->hori_stems;
stems = stem_table->stems;
num_stems = stem_table->num_stems;
/* Compute minimum and maximum coord for the stem */
min = pos + ( vertical
? builder->left_bearing.x
: builder->left_bearing.y );
if ( width >= 0 )
max = min + width;
else
{
/* a negative width indicates a `ghost' stem */
if ( width == -21 )
min += width;
max = min;
}
/* Now scan the array. If we find a stem with the same borders */
/* simply activate it. */
cur_stem = stems;
new_stem = 1;
for ( n = 0; n < num_stems; n++, cur_stem++ )
{
if ( cur_stem->min_edge.orus == min &&
cur_stem->max_edge.orus == max )
{
/* This stem is already in the table, simply activate it */
if ( ( cur_stem->hint_flags & T1_HINT_FLAG_ACTIVE ) == 0 )
{
cur_stem->hint_flags |= T1_HINT_FLAG_ACTIVE;
stem_table->num_active++;
}
new_stem = 0;
break;
}
}
/* add a new stem to the array if necessary */
if ( new_stem )
{
if ( cur_stem >= stems + T1_HINTER_MAX_EDGES )
{
FT_ERROR(( "t1_hinter_stem: too many stems in glyph charstring\n" ));
return T1_Err_Syntax_Error;
}
/* on the first pass, we record the stem, otherwise, this is */
/* a bug in the glyph loader! */
if ( builder->pass == 0 )
{
cur_stem->min_edge.orus = min;
cur_stem->max_edge.orus = max;
cur_stem->hint_flags = T1_HINT_FLAG_ACTIVE;
stem_table->num_stems++;
stem_table->num_active++;
}
else
{
FT_ERROR(( "t1_hinter_stem:" ));
FT_ERROR(( " fatal glyph loader bug -- pass2-stem\n" ));
return T1_Err_Syntax_Error;
}
}
return T1_Err_Ok;
}
static
FT_Error t1_hinter_stem3( T1_Builder* builder,
FT_Pos pos0,
FT_Int width0,
FT_Pos pos1,
FT_Int width1,
FT_Pos pos2,
FT_Int width2,
FT_Bool vertical )
{
/* For now, simply call `stem' 3 times */
return t1_hinter_stem( builder, pos0, width0, vertical ) ||
t1_hinter_stem( builder, pos1, width1, vertical ) ||
t1_hinter_stem( builder, pos2, width2, vertical );
}
static
FT_Error t1_hinter_changehints( T1_Builder* builder )
{
FT_Int dimension;
T1_Stem_Table* stem_table;
T1_Glyph_Hints* hinter = builder->glyph->hints;
/* If we are in the second pass of glyph hinting, we must */
/* call the function T1_Hint_Points() on the builder in order */
/* to force the fit the latest points to the pixel grid. */
if ( builder->pass == 1 )
T1_Hint_Points( builder );
/* Simply de-activate all hints in all arrays */
stem_table = &hinter->hori_stems;
for ( dimension = 2; dimension > 0; dimension-- )
{
T1_Stem_Hint* cur = stem_table->stems;
T1_Stem_Hint* limit = cur + stem_table->num_stems;
for ( ; cur < limit; cur++ )
cur->hint_flags &= ~T1_HINT_FLAG_ACTIVE;
stem_table->num_active = 0;
stem_table = &hinter->vert_stems;
}
return T1_Err_Ok;
}
const T1_Hinter_Funcs t1_hinter_funcs =
{
(T1_Hinter_ChangeHints)t1_hinter_changehints,
(T1_Hinter_DotSection) t1_hinter_ignore,
(T1_Hinter_Stem) t1_hinter_stem,
(T1_Hinter_Stem3) t1_hinter_stem3
};
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/********** *********/
/********** *********/
/********** STEM HINTS MANAGEMENT *********/
/********** *********/
/********** The following code is in charge of computing *********/
/********** the placement of each scaled stem hint. *********/
/********** *********/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************/
/* */
/* <Function> */
/* t1_sort_hints */
/* */
/* <Description> */
/* Sorta the list of active stems in increasing order, through the */
/* `sort' indexing table. */
/* */
/* <InOut> */
/* table :: A stem hints table. */
/* */
static
void t1_sort_hints( T1_Stem_Table* table )
{
FT_Int num_stems = table->num_stems;
FT_Int num_active = 0;
FT_Int* sort = table->sort;
T1_Stem_Hint* stems = table->stems;
FT_Int n;
/* record active stems in sort table */
for ( n = 0; n < num_stems; n++ )
{
if ( stems[n].hint_flags & T1_HINT_FLAG_ACTIVE )
sort[num_active++] = n;
}
/* Now sort the indices. There are usually very few stems, */
/* and they are pre-sorted in 90% cases, so we choose a */
/* simple bubble sort (quicksort would be slower). */
for ( n = 1; n < num_active; n++ )
{
FT_Int p = n - 1;
T1_Stem_Hint* cur = stems + sort[n];
do
{
FT_Int swap;
T1_Stem_Hint* prev = stems + sort[p];
/* note that by definition, the active stems cannot overlap */
/* so we simply compare their `min' to sort them (we could compare */
/* their max values also; this wouldn't change anything). */
if ( prev->min_edge.orus <= cur->min_edge.orus )
break;
/* swap elements */
swap = sort[p ];
sort[p ] = sort[p + 1];
sort[p + 1] = swap;
p--;
} while ( p >= 0 );
}
table->num_active = num_active;
}
/*************************************************************************/
/* */
/* <Function> */
/* t1_hint_horizontal_stems */
/* */
/* <Description> */
/* Computes the location of each scaled horizontal stem hint. This */
/* takes care of the blue zones and the horizontal stem snap table. */
/* */
/* <Input> */
/* table :: The horizontal stem hints table. */
/* */
/* hints :: The current size's hint structure. */
/* */
/* blueShift :: The value of the /BlueShift as taken from the face */
/* object. */
/* */
/* scale :: The 16.16 scale used to convert outline units to */
/* 26.6 pixels. */
/* */
/* <Note> */
/* For now, all stems are hinted independently from each other. It */
/* might be necessary, for better performance, to introduce the */
/* notion of `controlled' hints describing things like counter-stems, */
/* stem3, as well as overlapping stems control. */
/* */
static
void t1_hint_horizontal_stems( T1_Stem_Table* table,
T1_Size_Hints* hints,
FT_Pos blueShift,
FT_Fixed scale )
{
T1_Stem_Hint* stem = table->stems;
T1_Stem_Hint* limit = stem + table->num_stems;
/* first of all, scale the blueShift */
blueShift = SCALE( blueShift );
/* then scan the horizontal stem table */
for ( ; stem < limit; stem++ )
{
FT_Pos bottom_orus = stem->min_edge.orus;
FT_Pos top_orus = stem->max_edge.orus;
FT_Pos top_pix = SCALE( top_orus );
FT_Pos bottom_pix = SCALE( bottom_orus );
FT_Pos width_pix = top_pix - bottom_pix;
FT_Pos bottom = bottom_pix;
FT_Pos top = top_pix;
FT_Int align = T1_ALIGN_NONE;
/*********************************************************************/
/* */
/* Snap pixel width if in stem snap range */
/* */
{
T1_Snap_Zone* zone = hints->snap_heights;
T1_Snap_Zone* zone_limit = zone + hints->num_snap_heights;
FT_Pos best_dist = 32000;
T1_Snap_Zone* best_zone = 0;
for ( ; zone < zone_limit; zone++ )
{
FT_Pos dist;
dist = width_pix - zone->min;
if ( dist < 0 )
dist = -dist;
if ( dist < best_dist )
{
best_zone = zone;
best_dist = dist;
}
}
if ( best_zone )
{
if ( width_pix > best_zone->pix )
{
width_pix -= 0x20;
if ( width_pix < best_zone->pix )
width_pix = best_zone->pix;
}
else
{
width_pix += 0x20;
if ( width_pix > best_zone->pix )
width_pix = best_zone->pix;
}
}
}
/*********************************************************************/
/* */
/* round width - minimum 1 pixel if this isn't a ghost stem */
/* */
if ( width_pix > 0 )
width_pix = width_pix < ONE_PIXEL ? ONE_PIXEL : ROUND( width_pix );
/*********************************************************************/
/* */
/* Now check for bottom blue zones alignement */
/* */
{
FT_Int num_blues = hints->num_bottom_zones;
T1_Snap_Zone* blue = hints->blue_zones;
T1_Snap_Zone* blue_limit = blue + num_blues;
for ( ; blue < blue_limit; blue++ )
{
if ( bottom_pix < blue->min )
break;
if ( bottom_pix <= blue->max )
{
align = T1_ALIGN_BOTTOM;
bottom = ROUND( blue->pix );
/* implement blue shift */
if ( !hints->supress_overshoots )
{
FT_Pos delta = blue->pix - bottom_pix;
delta = delta < blueShift ? 0 : ROUND( delta );
bottom -= delta;
}
}
}
}
/*********************************************************************/
/* */
/* check for top blue zones alignement */
/* */
{
FT_Int num_blues = hints->num_blue_zones -
hints->num_bottom_zones;
T1_Snap_Zone* blue = hints->blue_zones +
hints->num_bottom_zones;
T1_Snap_Zone* blue_limit = blue + num_blues;
for ( ; blue < blue_limit; blue++ )
{
if ( top_pix < blue->min )
break;
if ( top_pix <= blue->max )
{
align |= T1_ALIGN_TOP;
top = ROUND( blue->pix );
/* implement blue shift */
if ( !hints->supress_overshoots )
{
FT_Pos delta = top - blue->pix;
delta = delta < blueShift ? 0 : ROUND( delta );
top += delta;
}
}
}
}
/*********************************************************************/
/* */
/* compute the hinted stem position, according to its alignment */
/* */
switch ( align )
{
case T1_ALIGN_BOTTOM: /* bottom zone alignment */
bottom_pix = bottom;
top_pix = bottom + width_pix;
break;
case T1_ALIGN_TOP: /* top zone alignment */
top_pix = top;
bottom_pix = top - width_pix;
break;
case T1_ALIGN_BOTH: /* bottom+top zone alignment */
bottom_pix = bottom;
top_pix = top;
break;
default: /* no alignment */
/* XXX TODO: Add management of controlled stems */
bottom = ( SCALE( bottom_orus + top_orus ) - width_pix ) / 2;
bottom_pix = ROUND( bottom );
top_pix = bottom_pix + width_pix;
}
stem->min_edge.pix = bottom_pix;
stem->max_edge.pix = top_pix;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* t1_hint_vertical_stems */
/* */
/* <Description> */
/* Computes the location of each scaled vertical stem hint. This */
/* takes care of the vertical stem snap table. */
/* */
/* <Input> */
/* table :: The vertical stem hints table. */
/* hints :: The current size's hint structure. */
/* scale :: The 16.16 scale used to convert outline units to */
/* 26.6 pixels. */
/* */
/* <Note> */
/* For now, all stems are hinted independently from each other. It */
/* might be necessary, for better performance, to introduce the */
/* notion of `controlled' hints describing things like counter-stems, */
/* stem3 as well as overlapping stems control. */
/* */
static
void t1_hint_vertical_stems( T1_Stem_Table* table,
T1_Size_Hints* hints,
FT_Fixed scale )
{
T1_Stem_Hint* stem = table->stems;
T1_Stem_Hint* limit = stem + table->num_stems;
for ( ; stem < limit; stem++ )
{
FT_Pos stem_left = stem->min_edge.orus;
FT_Pos stem_right = stem->max_edge.orus;
FT_Pos width_pix, left;
width_pix = SCALE( stem_right - stem_left );
/* Snap pixel width if in stem snap range */
{
T1_Snap_Zone* zone = hints->snap_heights;
T1_Snap_Zone* zone_limit = zone + hints->num_snap_heights;
FT_Pos best_dist = 32000;
T1_Snap_Zone* best_zone = 0;
for ( ; zone < zone_limit; zone++ )
{
FT_Pos dist;
dist = width_pix - zone->min;
if ( dist < 0 )
dist = -dist;
if ( dist < best_dist )
{
best_zone = zone;
best_dist = dist;
}
}
if ( best_zone )
{
if ( width_pix > best_zone->pix )
{
width_pix -= 0x20;
if ( width_pix < best_zone->pix )
width_pix = best_zone->pix;
}
else
{
width_pix += 0x20;
if ( width_pix > best_zone->pix )
width_pix = best_zone->pix;
}
}
}
/* round width - minimum 1 pixel if this isn't a ghost stem */
if ( width_pix > 0 )
width_pix = width_pix < ONE_PIXEL ? ONE_PIXEL
: ROUND( width_pix );
/* now place the snapped and rounded stem */
/* XXX TODO: implement controlled stems for the overlapping */
/* cases */
left = ( SCALE( stem_left + stem_right ) - width_pix ) / 2;
stem->min_edge.pix = ROUND( left );
stem->max_edge.pix = stem->min_edge.pix + width_pix;
}
}
/*************************************************************************/
/* */
/* <Function> */
/* t1_hint_point */
/* */
/* <Description> */
/* Grid-fit a coordinate with regards to a given stem hints table. */
/* */
/* <Input> */
/* table :: The source stem hints table. */
/* coord :: The original coordinate, expressed in font units. */
/* scale :: The 16.16 scale used to convert font units into */
/* 26.6 pixels. */
/* */
/* <Return> */
/* The hinted/scaled value in 26.6 pixels. */
/* */
/* <Note> */
/* For now, all stems are hinted independently from each other. It */
/* might be necessary, for better performance, to introduce the */
/* notion of `controlled' hints describing things like counter-stems, */
/* stem3 as well as overlapping stems control. */
/* */
static
FT_Pos t1_hint_point( T1_Stem_Table* table,
FT_Pos coord,
FT_Fixed scale )
{
FT_Int num_active = table->num_active;
FT_Int n;
T1_Stem_Hint* prev = 0;
T1_Stem_Hint* cur = 0;
T1_Edge* min;
T1_Edge* max;
FT_Pos delta;
/* only hint when there is at least one stem defined */
if ( num_active <= 0 )
return SCALE( coord );
/* scan the stem table to determine placement of coordinate */
/* relative to the list of sorted and stems */
for ( n = 0; n < num_active; n++, prev = cur )
{
cur = table->stems + table->sort[n];
/* is it on the left of the current edge? */
delta = cur->min_edge.orus - coord;
if ( delta == 0 )
return cur->min_edge.pix;
if ( delta > 0 )
{
/* if this is the left of the first edge, simply shift */
if ( !prev )
return cur->min_edge.pix - SCALE( delta );
/* otherwise, interpolate between the maximum of the */
/* previous stem, and the minimum of the current one */
min = &prev->max_edge;
max = &cur->min_edge;
goto Interpolate;
}
/* is it within the current edge? */
delta = cur->max_edge.orus - coord;
if ( delta == 0 )
return cur->max_edge.pix;
if ( delta > 0 )
{
/* interpolate within the stem */
min = &cur->min_edge;
max = &cur->max_edge;
goto Interpolate;
}
}
/* apparently, this coordinate is on the right of the last stem */
delta = coord - cur->max_edge.orus;
return cur->max_edge.pix + SCALE( delta );
Interpolate:
return min->pix + FT_MulDiv( coord - min->orus,
max->pix - min->pix,
max->orus - min->orus );
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_Hint_Points */
/* */
/* <Description> */
/* This function grid-fits several points in a given Type 1 builder */
/* at once. */
/* */
/* <Input> */
/* builder :: A handle to target Type 1 builder. */
/* */
LOCAL_FUNC
void T1_Hint_Points( T1_Builder* builder )
{
FT_Int first = builder->hint_point;
FT_Int last = builder->current->n_points - 1;
T1_Size size = builder->size;
FT_Fixed scale_x = size->root.metrics.x_scale;
FT_Fixed scale_y = size->root.metrics.y_scale;
T1_Glyph_Hints* hints = builder->glyph->hints;
T1_Stem_Table* hori_stems = &hints->hori_stems;
T1_Stem_Table* vert_stems = &hints->vert_stems;
FT_Vector* cur = builder->current->points + first;
FT_Vector* limit = cur + last - first + 1;
/* first of all, sort the active stem hints */
t1_sort_hints( hori_stems );
t1_sort_hints( vert_stems );
for ( ; cur < limit; cur++ )
{
cur->x = t1_hint_point( vert_stems, cur->x, scale_x );
cur->y = t1_hint_point( hori_stems, cur->y, scale_y );
}
builder->hint_point = builder->current->n_points;
}
/*************************************************************************/
/* */
/* <Function> */
/* T1_Hint_Stems */
/* */
/* <Description> */
/* This function is used to compute the location of each stem hint */
/* between the first and second passes of the glyph loader on the */
/* charstring. */
/* */
/* <Input> */
/* builder :: A handle to the target builder. */
/* */
LOCAL_FUNC
void T1_Hint_Stems( T1_Builder* builder )
{
T1_Glyph_Hints* hints = builder->glyph->hints;
T1_Private* priv = &builder->face->type1.private_dict;
T1_Size size = builder->size;
FT_Fixed scale_x = size->root.metrics.x_scale;
FT_Fixed scale_y = size->root.metrics.y_scale;
t1_hint_horizontal_stems( &hints->hori_stems,
builder->size->hints,
priv->blue_shift,
scale_y );
t1_hint_vertical_stems( &hints->vert_stems,
builder->size->hints,
scale_x );
}
/* END */