ref: 8cfcf6e057ab5d3a6791a80ae13b84f0ac353217
dir: /src/type1/t1hinter.h/
/***************************************************************************/
/* */
/* t1hinter.h */
/* */
/* Type 1 hinter (body). */
/* */
/* Copyright 1996-2000 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef T1HINTER_H
#define T1HINTER_H
#ifdef FT_FLAT_COMPILE
#include "t1objs.h"
#include "t1gload.h"
#else
#include <type1/t1objs.h>
#include <type1/t1gload.h>
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*************************************************************************/
/* */
/* <Struct> */
/* T1_Snap_Zone */
/* */
/* <Description> */
/* A `snap zone' is used to model either a blue zone or a stem width */
/* at a given character size. It is made of a minimum and maximum */
/* edge, defined in 26.6 pixels, as well as an `original' and */
/* `scaled' position. */
/* */
/* The position corresponds to the stem width (for stem snap zones) */
/* or to the blue position (for blue zones). */
/* */
/* <Fields> */
/* orus :: The original position in font units. */
/* */
/* pix :: The current position in sub-pixel units. */
/* */
/* min :: The minimum boundary in sub-pixel units. */
/* */
/* max :: The maximum boundary in sub-pixel units. */
/* */
typedef struct T1_Snap_Zone_
{
FT_Pos orus;
FT_Pos pix;
FT_Pos min;
FT_Pos max;
} T1_Snap_Zone;
/*************************************************************************/
/* */
/* <Struct> */
/* T1_Edge */
/* */
/* <Description> */
/* A very simple structure used to model a stem edge. */
/* */
/* <Fields> */
/* orus :: The original edge position in font units. */
/* */
/* pix :: The scaled edge position in sub-pixel units. */
/* */
typedef struct T1_Edge_
{
FT_Pos orus;
FT_Pos pix;
} T1_Edge;
/*************************************************************************/
/* */
/* <Struct> */
/* T1_Stem_Hint */
/* */
/* <Description> */
/* A simple structure used to model a stem hint. */
/* */
/* <Fields> */
/* min_edge :: The hint's minimum edge. */
/* */
/* max_edge :: The hint's maximum edge. */
/* */
/* hint_flags :: Some flags describing the stem properties. */
/* */
/* <Note> */
/* The min and max edges of a ghost stem have the same position, even */
/* if they are coded in a weird way in the charstrings. */
/* */
typedef struct T1_Stem_Hint_
{
T1_Edge min_edge;
T1_Edge max_edge;
FT_Int hint_flags;
} T1_Stem_Hint;
#define T1_HINT_FLAG_ACTIVE 1 /* indicates an active stem */
#define T1_HINT_FLAG_MIN_BORDER 2 /* unused for now */
#define T1_HINT_FLAG_MAX_BORDER 4 /* unused for now */
/* hinter's configuration constants */
#define T1_HINTER_MAX_BLUES 24 /* maximum number of blue zones */
#define T1_HINTER_MAX_SNAPS 16 /* maximum number of stem snap zones */
#define T1_HINTER_MAX_EDGES 64 /* maximum number of stem hints */
/*************************************************************************/
/* */
/* <Struct> */
/* T1_Size_Hints */
/* */
/* <Description> */
/* A structure used to model the hinting information related to a size */
/* object. */
/* */
/* <Fields> */
/* supress_overshoots :: A boolean flag to tell whether overshoot */
/* supression should occur. */
/* */
/* num_blue_zones :: The total number of blue zones (top+bottom). */
/* */
/* num_bottom_zones :: The number of bottom zones. */
/* */
/* blue_zones :: The blue zones table. Bottom zones are */
/* stored first in the table, followed by all */
/* top zones. */
/* */
/* num_snap_widths :: The number of horizontal stem snap zones. */
/* */
/* snap_widths :: An array of horizontal stem snap zones. */
/* */
/* num_snap_heights :: The number of vertical stem snap zones. */
/* */
/* snap_heights :: An array of vertical stem snap zones. */
/* */
struct T1_Size_Hints_
{
FT_Bool supress_overshoots;
FT_Int num_blue_zones;
FT_Int num_bottom_zones;
T1_Snap_Zone blue_zones[T1_HINTER_MAX_BLUES];
FT_Int num_snap_widths;
T1_Snap_Zone snap_widths[T1_HINTER_MAX_SNAPS];
FT_Int num_snap_heights;
T1_Snap_Zone snap_heights[T1_HINTER_MAX_SNAPS];
};
/*************************************************************************/
/* */
/* <Struct> */
/* T1_Stem_Table */
/* */
/* <Description> */
/* A simple structure used to model a set of stem hints in a single */
/* direction during the loading of a given glyph outline. Not all */
/* stem hints are active at a time. Moreover, stems must be sorted */
/* regularly. */
/* */
/* <Fields> */
/* num_stems :: The total number of stems in the table. */
/* */
/* num_active :: The number of active stems in the table. */
/* */
/* stems :: A table of all stems. */
/* */
/* sort :: A table of indices into the stems table, used to */
/* keep a sorted list of the active stems. */
/* */
typedef struct T1_Stem_Table_
{
FT_Int num_stems;
FT_Int num_active;
T1_Stem_Hint stems[T1_HINTER_MAX_EDGES];
FT_Int sort [T1_HINTER_MAX_EDGES];
} T1_Stem_Table;
/*************************************************************************/
/* */
/* <Struct> */
/* T1_Glyph_Hints */
/* */
/* <Description> */
/* A structure used to model the stem hints of a given glyph outline */
/* during glyph loading. */
/* */
/* <Fields> */
/* hori_stems :: The horizontal stem hints table. */
/* vert_stems :: The vertical stem hints table. */
/* */
struct T1_Glyph_Hints_
{
T1_Stem_Table hori_stems;
T1_Stem_Table vert_stems;
};
/*************************************************************************/
/* */
/* <Data> */
/* t1_hinter_funcs */
/* */
/* <Description> */
/* A table containing the address of various functions used during */
/* the loading of an hinted scaled outline. */
/* */
extern const T1_Hinter_Funcs t1_hinter_funcs;
LOCAL_DEF
FT_Error T1_New_Size_Hinter( T1_Size size );
LOCAL_DEF
void T1_Done_Size_Hinter( T1_Size size );
LOCAL_DEF
FT_Error T1_Reset_Size_Hinter( T1_Size size );
LOCAL_DEF
FT_Error T1_New_Glyph_Hinter( T1_GlyphSlot glyph );
LOCAL_DEF
void T1_Done_Glyph_Hinter( T1_GlyphSlot glyph );
LOCAL_DEF
void T1_Hint_Points( T1_Builder* builder );
LOCAL_DEF
void T1_Hint_Stems( T1_Builder* builder );
#ifdef __cplusplus
}
#endif
#endif /* T1HINTER_H */
/* END */