ref: 2c5b7ebf71d50a42a82d72e7109d6225ac77f126
dir: /builds/unix/configure/
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
--enable-static[=PKGS] build static libraries [default=yes]"
ac_help="$ac_help
--enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case "$ac_option" in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
esac
done
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=ftconfig.in
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says [email protected].
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
version_info='6:0:0'
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
# same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:588: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:609: checking target system type" >&5
target_alias=$target
case "$target_alias" in
NONE)
case $nonopt in
NONE) target_alias=$host_alias ;;
*) target_alias=$nonopt ;;
esac ;;
esac
target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:627: checking build system type" >&5
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:653: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:683: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
break
fi
done
IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# -gt 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" "$@"
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
case "`uname -s`" in
*win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:734: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="cl"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
;;
esac
fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:766: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
#line 777 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_cross=no
else
ac_cv_prog_cc_cross=yes
fi
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:808: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:813: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:822: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
else
GCC=
fi
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:841: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_cc_g=yes
else
ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:873: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# substituted into the Makefile and "${CC-cc}" will confuse make.
CPP="${CC-cc} -E"
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
#line 888 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
#line 905 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:911: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
#line 922 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
CPP="$ac_cv_prog_CPP"
else
ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6
if test "x$CC" = xgcc; then
XX_CFLAGS="-Wall"
XX_ANSIFLAGS="-pedantic -ansi"
else
case "$host" in
*-dec-osf*)
CFLAGS=
XX_CFLAGS="-std1 -g3"
XX_ANSIFLAGS=
;;
*)
XX_CFLAGS=
XX_ANSIFLAGS=
;;
esac
fi
# Extract the first word of "rm", so it can be a program name with args.
set dummy rm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:975: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RMF'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RMF"; then
ac_cv_prog_RMF="$RMF" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RMF="rm -f"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
RMF="$ac_cv_prog_RMF"
if test -n "$RMF"; then
echo "$ac_t""$RMF" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "rmdir", so it can be a program name with args.
set dummy rmdir; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1004: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RMDIR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RMDIR"; then
ac_cv_prog_RMDIR="$RMDIR" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RMDIR="rmdir"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
RMDIR="$ac_cv_prog_RMDIR"
if test -n "$RMDIR"; then
echo "$ac_t""$RMDIR" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1043: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
fi
echo "$ac_t""$INSTALL" 1>&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
case "$INSTALL" in
/*)
;;
*/*)
INSTALL="`pwd`/$INSTALL" ;;
esac
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:1103: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1108 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_cv_header_stdc=yes
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1133 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "memchr" >/dev/null 2>&1; then
:
else
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1151 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "free" >/dev/null 2>&1; then
:
else
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 1172 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
if { (eval echo configure:1183: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_header_stdc=no
fi
rm -fr conftest*
fi
fi
fi
echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF
fi
for ac_hdr in fcntl.h unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:1210: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1215 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:1248: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1253 "configure"
#include "confdefs.h"
int main() {
/* Ultrix mips cc rejects this. */
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this. */
char const *const *ccp;
char **p;
/* NEC SVR4.0.2 mips cc rejects this. */
struct point {int x, y;};
static struct point const zero = {0,0};
/* AIX XL C 1.02.0.0 rejects this.
It does not let you subtract one const X* pointer from another in an arm
of an if-expression whose if-part is not a constant expression */
const char *g = "string";
ccp = &g + (g ? g-g : 0);
/* HPUX 7.0 cc rejects these. */
++ccp;
p = (char**) ccp;
ccp = (char const *const *) p;
{ /* SCO 3.2v4 cc rejects this. */
char *t;
char const *s = 0 ? (char *) 0 : (char const *) 0;
*t++ = 0;
}
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
int x[] = {25, 17};
const int *foo = &x[0];
++foo;
}
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
typedef const int *iptr;
iptr p = 0;
++p;
}
{ /* AIX XL C 1.02.0.0 rejects this saying
"k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
struct s { int j; const int *ap[3]; };
struct s *b; b->j = 5;
}
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
const int foo = 10;
}
; return 0; }
EOF
if { (eval echo configure:1302: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_c_const=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_c_const" 1>&6
if test $ac_cv_c_const = no; then
cat >> confdefs.h <<\EOF
#define const
EOF
fi
echo $ac_n "checking size of int""... $ac_c" 1>&6
echo "configure:1323: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 1331 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
FILE *f=fopen("conftestval", "w");
if (!f) exit(1);
fprintf(f, "%d\n", sizeof(int));
exit(0);
}
EOF
if { (eval echo configure:1342: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_sizeof_int=0
fi
rm -fr conftest*
fi
fi
echo "$ac_t""$ac_cv_sizeof_int" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_INT $ac_cv_sizeof_int
EOF
echo $ac_n "checking size of long""... $ac_c" 1>&6
echo "configure:1362: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 1370 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
FILE *f=fopen("conftestval", "w");
if (!f) exit(1);
fprintf(f, "%d\n", sizeof(long));
exit(0);
}
EOF
if { (eval echo configure:1381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_sizeof_long=0
fi
rm -fr conftest*
fi
fi
echo "$ac_t""$ac_cv_sizeof_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG $ac_cv_sizeof_long
EOF
for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:1406: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1411 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1416: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1445: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1450 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:1473: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
echo "configure:1498: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
#line 1506 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
Here is a matrix of mmap possibilities:
mmap private not fixed
mmap private fixed at somewhere currently unmapped
mmap private fixed at somewhere already mapped
mmap shared not fixed
mmap shared fixed at somewhere currently unmapped
mmap shared fixed at somewhere already mapped
For private mappings, we should verify that changes cannot be read()
back from the file, nor mmap's back from the file at a different
address. (There have been systems where private was not correctly
implemented like the infamous i386 svr4.0, and systems where the
VM page cache was not coherent with the filesystem buffer cache
like early versions of FreeBSD and possibly contemporary NetBSD.)
For shared mappings, we should conversely verify that changes get
propogated back to all the places they're supposed to be.
Grep wants private fixed already mapped.
The main things grep needs to know about mmap are:
* does it exist and is it safe to write into the mmap'd area
* how to use it (BSD variants) */
#include <sys/types.h>
#include <fcntl.h>
#include <sys/mman.h>
/* This mess was copied from the GNU getpagesize.h. */
#ifndef HAVE_GETPAGESIZE
# ifdef HAVE_UNISTD_H
# include <unistd.h>
# endif
/* Assume that all systems that can run configure have sys/param.h. */
# ifndef HAVE_SYS_PARAM_H
# define HAVE_SYS_PARAM_H 1
# endif
# ifdef _SC_PAGESIZE
# define getpagesize() sysconf(_SC_PAGESIZE)
# else /* no _SC_PAGESIZE */
# ifdef HAVE_SYS_PARAM_H
# include <sys/param.h>
# ifdef EXEC_PAGESIZE
# define getpagesize() EXEC_PAGESIZE
# else /* no EXEC_PAGESIZE */
# ifdef NBPG
# define getpagesize() NBPG * CLSIZE
# ifndef CLSIZE
# define CLSIZE 1
# endif /* no CLSIZE */
# else /* no NBPG */
# ifdef NBPC
# define getpagesize() NBPC
# else /* no NBPC */
# ifdef PAGESIZE
# define getpagesize() PAGESIZE
# endif /* PAGESIZE */
# endif /* no NBPC */
# endif /* no NBPG */
# endif /* no EXEC_PAGESIZE */
# else /* no HAVE_SYS_PARAM_H */
# define getpagesize() 8192 /* punt totally */
# endif /* no HAVE_SYS_PARAM_H */
# endif /* no _SC_PAGESIZE */
#endif /* no HAVE_GETPAGESIZE */
#ifdef __cplusplus
extern "C" { void *malloc(unsigned); }
#else
char *malloc();
#endif
int
main()
{
char *data, *data2, *data3;
int i, pagesize;
int fd;
pagesize = getpagesize();
/*
* First, make a file with some known garbage in it.
*/
data = malloc(pagesize);
if (!data)
exit(1);
for (i = 0; i < pagesize; ++i)
*(data + i) = rand();
umask(0);
fd = creat("conftestmmap", 0600);
if (fd < 0)
exit(1);
if (write(fd, data, pagesize) != pagesize)
exit(1);
close(fd);
/*
* Next, try to mmap the file at a fixed address which
* already has something else allocated at it. If we can,
* also make sure that we see the same garbage.
*/
fd = open("conftestmmap", O_RDWR);
if (fd < 0)
exit(1);
data2 = malloc(2 * pagesize);
if (!data2)
exit(1);
data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_FIXED, fd, 0L))
exit(1);
for (i = 0; i < pagesize; ++i)
if (*(data + i) != *(data2 + i))
exit(1);
/*
* Finally, make sure that changes to the mapped area
* do not percolate back to the file as seen by read().
* (This is a bug on some variants of i386 svr4.0.)
*/
for (i = 0; i < pagesize; ++i)
*(data2 + i) = *(data2 + i) + 1;
data3 = malloc(pagesize);
if (!data3)
exit(1);
if (read(fd, data3, pagesize) != pagesize)
exit(1);
for (i = 0; i < pagesize; ++i)
if (*(data + i) != *(data3 + i))
exit(1);
close(fd);
unlink("conftestmmap");
exit(0);
}
EOF
if { (eval echo configure:1646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_func_mmap_fixed_mapped=no
fi
rm -fr conftest*
fi
fi
echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
if test $ac_cv_func_mmap_fixed_mapped = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_MMAP 1
EOF
fi
if test "$ac_cv_func_mmap_fixed_mapped" != yes; then
FTSYS_SRC='$(BASE_)ftsystem.c'
else
FTSYS_SRC='$(BUILD)/ftsystem.c'
echo $ac_n "checking whether munmap must be declared""... $ac_c" 1>&6
echo "configure:1674: checking whether munmap must be declared" >&5
if eval "test \"`echo '$''{'ft_cv_munmap_decl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1679 "configure"
#include "confdefs.h"
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <sys/mman.h>
int main() {
char *(*pfn) = (char *(*))munmap
; return 0; }
EOF
if { (eval echo configure:1690: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ft_cv_munmap_decl=no
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ft_cv_munmap_decl=yes
fi
rm -f conftest*
fi
echo "$ac_t""$ft_cv_munmap_decl" 1>&6
if test $ft_cv_munmap_decl = yes; then
cat >> confdefs.h <<\EOF
#define NEED_MUNMAP_DECL 1
EOF
fi
echo $ac_n "checking for munmap's first parameter type""... $ac_c" 1>&6
echo "configure:1710: checking for munmap's first parameter type" >&5
cat > conftest.$ac_ext <<EOF
#line 1712 "configure"
#include "confdefs.h"
#include <unistd.h>
#include <sys/mman.h>
int munmap(void *, size_t);
int main() {
; return 0; }
EOF
if { (eval echo configure:1722: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""void *" 1>&6;cat >> confdefs.h <<\EOF
#define MUNMAP_USES_VOIDP 1
EOF
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "$ac_t""char *" 1>&6
fi
rm -f conftest*
fi
for ac_func in memcpy memmove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:1742: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1747 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:1770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_shared=yes
fi
# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_static=yes
fi
# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
enableval="$enable_fast_install"
p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_fast_install=yes
fi
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1867: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld"
test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1906: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1930: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1933: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
LD="$ac_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1968: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi
fi
echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1984: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi
fi
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:2020: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
rm -f conftestdata
ac_cv_prog_LN_S="ln -s"
else
ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
enableval="$enable_libtool_lock"
:
fi
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '#line 2069 "configure"' > conftest.$ac_ext
if { (eval echo configure:2070: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:2091: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2096 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { (eval echo configure:2103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
lt_cv_cc_needs_belf=no
fi
rm -f conftest*
fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
esac
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
DEFS=-DHAVE_CONFIG_H
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
trap 'rm -fr `echo "unix-cc.mk:unix-cc.in unix-def.mk:unix-def.in ftconfig.h:ftconfig.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@version_info@%$version_info%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@XX_CFLAGS@%$XX_CFLAGS%g
s%@XX_ANSIFLAGS@%$XX_ANSIFLAGS%g
s%@RMF@%$RMF%g
s%@RMDIR@%$RMDIR%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@FTSYS_SRC@%$FTSYS_SRC%g
s%@RANLIB@%$RANLIB%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
CEOF
EOF
cat >> $CONFIG_STATUS <<\EOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
else
sed "${ac_end}q" conftest.subs > conftest.s$ac_file
fi
if test ! -s conftest.s$ac_file; then
ac_more_lines=false
rm -f conftest.s$ac_file
else
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f conftest.s$ac_file"
else
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
fi
ac_file=`expr $ac_file + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_cmds`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"unix-cc.mk:unix-cc.in unix-def.mk:unix-def.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
case "$ac_given_INSTALL" in
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='\([ ]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'
if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_HEADERS="ftconfig.h:ftconfig.in"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
cat $ac_file_inputs > conftest.in
EOF
# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h. And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
rm -f conftest.tail
while :
do
ac_lines=`grep -c . conftest.vals`
# grep -c gives empty output for an empty file on some AIX systems.
if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
# Write a limited-size here document to conftest.frag.
echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
echo 'CEOF
sed -f conftest.frag conftest.in > conftest.out
rm -f conftest.in
mv conftest.out conftest.in
' >> $CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
rm -f conftest.vals
mv conftest.tail conftest.vals
done
rm -f conftest.vals
cat >> $CONFIG_STATUS <<\EOF
rm -f conftest.frag conftest.h
echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
cat conftest.in >> conftest.h
rm -f conftest.in
if cmp -s $ac_file conftest.h 2>/dev/null; then
echo "$ac_file is unchanged"
rm -f conftest.h
else
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
fi
rm -f $ac_file
mv conftest.h $ac_file
fi
fi; done
EOF
cat >> $CONFIG_STATUS <<EOF
EOF
cat >> $CONFIG_STATUS <<\EOF
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1