shithub: cc65-plan9

diff: cannot open b/mkfiles/libsrc/defs//null: file does not exist: 'b/mkfiles/libsrc/defs//null' diff: cannot open b/mkfiles/libsrc//null: file does not exist: 'b/mkfiles/libsrc//null'

--- a/TODO

+++ b/TODO

@@ -1,6 +1,7 @@

 - Add git revision to BUILD_ID (mkfiles/src/common.mk)

 - Write mkfiles for libsrc, doc and samples

 - Cleanup mkfiles

+	- See mkfiles/libsrc/mkfile.target

 - Maybe write mkfiles to be installed somewhere like /sys/lib/cc65/$system/mkfile

 	- Can be imported for building projects for $system, in the same spirit

 	as /$objtype/mkfile

--- /dev/null

+++ b/mkfiles/libsrc/defs/apple2enh.mk

@@ -1,0 +1,3 @@

+SRCDIR=apple2

+OBJPFX=a2

+DRVPFX=a2e

--- /dev/null

+++ b/mkfiles/libsrc/defs/atari.mk

@@ -1,0 +1,40 @@

+# Mostly copy-pasted from atari/Makefile.inc, including comments

+# FIXME: It may be feasible to generate this file automatically

+# NUMDRVS        - number of supported drives (max. 16)

+#                  4 bytes for each device are statically allocated

+# LINEBUF        - support line buffered reads from E: (the number specifies

+#                  the length of the buffer)

+# UCASE_FILENAME - all filenames get uppercased

+# DEFAULT_DEVICE - if the string passed to the uppercase function doesn't

+#                  include a device (":" at position 2 or 3), provide "Dn:"

+#                  as a default disk device

+#                  n is the value of DEFAULT_DEVICE, unless DYNAMIC_DD is

+#                  also set, in which case it's overridden by a runtime

+#                  check (on SpartaDOS only)

+#                  needs UCASE_FILENAME to be defined, otherwise no effect

+# DYNAMIC_DD     - determine default disk device at runtime (SpartaDOS only)

+#                  needs DEFAULT_DEVICE to be defined, otherwise no effect

+CA65FLAGS=$CA65FLAGS -D NUMDRVS=4 -D LINEBUF=80 -D UCASE_FILENAME=1 -D DEFAULT_DEVICE=1 -D DYNAMIC_DD=1

+# The following defines are only used by the 'atarixl' target:

+#

+# CHARGEN_RELOC  - If defined, CHBAS and CHBASE are updated when

+#                  enabling or disabling the ROM.

+#                  If the ROM is enabled, $E0 is written to CHBAS

+#                  and CHBASE.

+#                  If the ROM is disabled, the upper byte of

+#                  __CHARGEN_START__ is written to CHBAS and CHBASE.

+# USEWSYNC       - If defined, the code waits for horizontal retrace

+#                  before switching the ROM and updating CHBAS and

+#                  CHBASE. This define only has effect if CHARGEN_RELOC

+#                  is also defined.

+# Disabled by default, you should enable it if the linker script relocates the

+# character generator (like atarixl-largehimem.cfg).

+#CA65FLAGS=$CA65_FLAGS -D CHARGEN_RELOC -D USEWSYNC

+# Disable if you don't want to use page 6 for mouse P/M data.

+# If disabled, top of the RAM is used for P/M data.

+CA65FLAGS=$CA65_FLAGS -D USE_PAGE6

--- /dev/null

+++ b/mkfiles/libsrc/defs/atarixl.mk

@@ -1,0 +1,3 @@

+SRCDIR=atari

+OBJPFX=atr

+DRVPFX=atrx

--- /dev/null

+++ b/mkfiles/libsrc/defs/common.mk

@@ -1,0 +1,3 @@

+SRCDIR=$TARGET

+OBJPFX=

+DRVPFX=

--- /dev/null

+++ b/mkfiles/libsrc/defs/geos-apple.mk

@@ -1,0 +1,1 @@

+CA65FLAGS=-Igeos-apple -Igeos-common

--- /dev/null

+++ b/mkfiles/libsrc/defs/geos-cbm.mk

@@ -1,0 +1,1 @@

+CA65FLAGS=-Igeos-cbm -Igeos-common

--- /dev/null

+++ b/mkfiles/libsrc/defs/sim65c02.mk

@@ -1,0 +1,1 @@

+SRCDIR=sim6502

--- /dev/null

+++ b/mkfiles/libsrc/mkfile

@@ -1,0 +1,63 @@

+CBMS=\

+	c128	\

+	c16		\

+	c64		\

+	cbm510	\

+	cbm610	\

+	cx16	\

+	pet		\

+	plus4	\

+	vic20

+GEOS=\

+	geos-apple	\

+	geos-cbm

+TARGETS=\

+	apple2		\

+	apple2enh	\

+	atari		\

+	atarixl		\

+	atari2600	\

+	atari5200	\

+	atmos		\

+	creativision\

+	$CBMS		\

+	$GEOS		\

+	gamate		\

+	lynx		\

+	nes			\

+	none		\

+	osic1p		\

+	pce			\

+	sim6502		\

+	sim65c02	\

+	supervision	\

+	telestrat

+DRVTYPES=\

+	emd	\

+	joy	\

+	mou	\

+	ser	\

+	tgi

+OUTPUTDIRS=\

+	lib		\

+	asminc	\

+	cfg		\

+	include	\

+	`{echo ../include/*			| sed 's@../@@g'}	\

+	`{echo ../target/*/drv/*	| sed 's@../@@g'}	\

+	`{echo ../target/*/util		| sed 's@../@@g'}

+datadir=/sys/lib/cc65

+all:V: $TARGETS

+$TARGETS:V:

+	for(TARGET in $target) # Can I get mk to call each target individually?

+		mk -f mkfile.target || status=''

+# TODO: clean, nuke, install

\ No newline at end of file

--- /dev/null

+++ b/mkfiles/libsrc/mkfile.target

@@ -1,0 +1,103 @@

+CA65FLAGS=

+CC65FLAGS=-Or -Werror

+# For native $O

+</$cputype/mkfile

+CC65_HOME=`{cleanname -d `{pwd} ..}

+AR65=../src/ar65/$O.out

+CA65=../src/ca65/$O.out

+CC65=../src/cc65/$O.out

+LD65=../src/cc65/$O.out

+../src/%/$O.out:

+	@{

+		cd ../src

+		objtype=$cputype mk $stem/$O.out

+	}

+EXTZP=\

+	cbm510	\

+	cbm610	\

+	lynx

+TARGETUTIL=\

+	apple2		\

+	apple2enh	\

+	atari		\

+	geos-apple

+GEOSDIRS=\

+	common		\

+	conio		\

+	disk		\

+	dlgbox		\

+	file		\

+	graph		\

+	memory		\

+	menuicon	\

+	mousesprite	\

+	process		\

+	runtime		\

+	system

+<defs/common.mk

+<`{test -r defs/$TARGET.mk && echo defs/$TARGET.mk || echo /dev/null} # It needs a include name

+SRCDIRS=\

+	$SRCDIR	\

+	`{~ $TARGET $CBMS && echo cbm}	\

+	`{~ $TARGET $GEOS && for(dir in $GEOSDIRS) {test -d $TARGET/$dir && echo $TARGET/$dir; echo geos-common/$dir}}	\

+	common		\

+	conio		\

+	dbg			\

+	em			\

+	joystick	\

+	mouse		\

+	runtime		\

+	serial		\

+	tgi			\

+	zlib

+SRC=`{walk $SRCDIRS | grep '\.[cs]$'}

+# Can we do this with a single namelist instead?

+OBJ=`{for(f in $SRC) echo $f | sed 's@\.[cs][email protected]@g'}

+DEPS=${OBJ:%.o=%.d}

+EXTRASRC=`{walk $SRCDIR | grep $SRCDIR/extra/^'.*\.s$'}

+EXTRAOBJ=${EXTRASRC:$SRCDIR/extra/%.s=../lib/$TARGET-%.o}

+DEPS=$DEPS ${EXTRAOBJ:../lib/%.o=$TARGET/%.d}

+# TODO: Target tools

+ZPOBJ=$TARGET/zeropage `{~ $TARGET $EXTZP && echo $TARGET/extzp.o}

+all:V: $TARGET

+# TODO: drvs

+# FIXME: Dump temporary assembly under ../libwrk, with .s extension

+%.o: %.s

+	$CA65 -t $TARGET $CA65FLAGS --create-dep `{echo $target | sed 's@\.o$@\.d@g'} \

+		-o $target $prereq

+%.o: %.c

+	$CC65 -t $TARGET $CC65FLAGS --create-dep `{echo $target | sed 's@\.o$@\.d@g'} \

+		--dep-target $target -o `{echo $target | sed 's@\.o$@\.asm@g'} $prereq

+	$CA65 -t $TARGET -o $target `{echo $target | sed 's@\.o$@\.asm@g'}

+../lib/$TARGET-%.o: $SRCDIR/extra/%.s

+	mkdir -p ../lib

+	$CA65 -t $TARGET $CA65FLAGS \

+		--create-dep `{echo $target | sed 's@^../lib/@'^$TARGET^'/@g;s@\[email protected]@g'}

+# TODO: Maintain that as an archive

+../lib/$TARGET.lib: $OBJ

+	$AR65 a $target $prereq

+$TARGET:V: $EXTRAOBJ ../lib/$TARGET.lib