ref: 873fc5b04b25d44d4d4276e7842be0a827ce832b
parent: 1e0ba0f40a8d874b3474f1b543943a65d42137b2
author: Ralph Giles <[email protected]>
date: Fri Dec 2 08:26:02 EST 2011
Fix documenation typos. Doxygen is smart enough to insert a period if the paragraph before the @see directive, which starts a new section, doesn't have one. Unfortunately it's not smart enough to convert a comma to a period. So while the "description, @see foo" idiom used for the CTL documentation scans well in the header file, the Doxygen output end up with "description,.\n". Minimal change to remove the offending commas.
--- a/include/opus_defines.h
+++ b/include/opus_defines.h
@@ -171,7 +171,7 @@
* @param[in] x <tt>int</tt>: 0-10, inclusive
* @hideinitializer */
#define OPUS_SET_COMPLEXITY(x) OPUS_SET_COMPLEXITY_REQUEST, __opus_check_int(x)
-/** Gets the encoder's complexity configuration, @see OPUS_SET_COMPLEXITY
+/** Gets the encoder's complexity configuration. @see OPUS_SET_COMPLEXITY
* @param[out] x <tt>int*</tt>: 0-10, inclusive
* @hideinitializer */
#define OPUS_GET_COMPLEXITY(x) OPUS_GET_COMPLEXITY_REQUEST, __opus_check_int_ptr(x)
@@ -185,7 +185,7 @@
* @param[in] x <tt>opus_int32</tt>: bitrate in bits per second.
* @hideinitializer */
#define OPUS_SET_BITRATE(x) OPUS_SET_BITRATE_REQUEST, __opus_check_int(x)
-/** Gets the encoder's bitrate configuration, @see OPUS_SET_BITRATE
+/** Gets the encoder's bitrate configuration. @see OPUS_SET_BITRATE
* @param[out] x <tt>opus_int32*</tt>: bitrate in bits per second.
* @hideinitializer */
#define OPUS_GET_BITRATE(x) OPUS_GET_BITRATE_REQUEST, __opus_check_int_ptr(x)
@@ -200,7 +200,7 @@
* @param[in] x <tt>int</tt>: 0; 1 (default)
* @hideinitializer */
#define OPUS_SET_VBR(x) OPUS_SET_VBR_REQUEST, __opus_check_int(x)
-/** Gets the encoder's VBR configuration, @see OPUS_SET_VBR
+/** Gets the encoder's VBR configuration. @see OPUS_SET_VBR
* @param[out] x <tt>int*</tt>: 0; 1
* @hideinitializer */
#define OPUS_GET_VBR(x) OPUS_GET_VBR_REQUEST, __opus_check_int_ptr(x)
@@ -228,12 +228,12 @@
* @param[in] x <tt>int</tt>: OPUS_AUTO (default); 1 (forced mono); 2 (forced stereo)
* @hideinitializer */
#define OPUS_SET_FORCE_CHANNELS(x) OPUS_SET_FORCE_CHANNELS_REQUEST, __opus_check_int(x)
-/** Gets the encoder's forced channel configuration, @see OPUS_SET_FORCE_CHANNELS
+/** Gets the encoder's forced channel configuration. @see OPUS_SET_FORCE_CHANNELS
* @param[out] x <tt>int*</tt>: OPUS_AUTO; 0; 1
* @hideinitializer */
#define OPUS_GET_FORCE_CHANNELS(x) OPUS_GET_FORCE_CHANNELS_REQUEST, __opus_check_int_ptr(x)
-/** Configures the encoder's maximum bandpass allowed, @see OPUS_GET_MAX_BANDWIDTH
+/** Configures the encoder's maximum bandpass allowed. @see OPUS_GET_MAX_BANDWIDTH
* The supported values are:
* - OPUS_BANDWIDTH_NARROWBAND 4kHz passband
* - OPUS_BANDWIDTH_MEDIUMBAND 6kHz passband
@@ -244,12 +244,12 @@
* @hideinitializer */
#define OPUS_SET_MAX_BANDWIDTH(x) OPUS_SET_MAX_BANDWIDTH_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured maximum bandpass allowed, @see OPUS_SET_MAX_BANDWIDTH
+/** Gets the encoder's configured maximum bandpass allowed. @see OPUS_SET_MAX_BANDWIDTH
* @param[out] x <tt>int*</tt>: Bandwidth value
* @hideinitializer */
#define OPUS_GET_MAX_BANDWIDTH(x) OPUS_GET_MAX_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
-/** Configures the encoder's bandpass, @see OPUS_GET_BANDWIDTH
+/** Configures the encoder's bandpass. @see OPUS_GET_BANDWIDTH
* The supported values are:
* - OPUS_AUTO (default)
* - OPUS_BANDWIDTH_NARROWBAND 4kHz passband
@@ -270,7 +270,7 @@
* @param[in] x <tt>int</tt>: Signal type
* @hideinitializer */
#define OPUS_SET_SIGNAL(x) OPUS_SET_SIGNAL_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured signal type, @see OPUS_SET_SIGNAL
+/** Gets the encoder's configured signal type. @see OPUS_SET_SIGNAL
*
* @param[out] x <tt>int*</tt>: Signal type
* @hideinitializer */
@@ -287,7 +287,7 @@
* @param[in] x <tt>int</tt>: Application value
* @hideinitializer */
#define OPUS_SET_APPLICATION(x) OPUS_SET_APPLICATION_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured application, @see OPUS_SET_APPLICATION
+/** Gets the encoder's configured application. @see OPUS_SET_APPLICATION
*
* @param[out] x <tt>int*</tt>: Application value
* @hideinitializer */
@@ -314,7 +314,7 @@
* @param[in] x <tt>int</tt>: FEC flag, 0 (disabled) is default
* @hideinitializer */
#define OPUS_SET_INBAND_FEC(x) OPUS_SET_INBAND_FEC_REQUEST, __opus_check_int(x)
-/** Gets encoder's configured use of inband forward error correction, @see OPUS_SET_INBAND_FEC
+/** Gets encoder's configured use of inband forward error correction. @see OPUS_SET_INBAND_FEC
*
* @param[out] x <tt>int*</tt>: FEC flag
* @hideinitializer */
@@ -328,7 +328,7 @@
* @param[in] x <tt>int</tt>: Loss percentage in the range 0-100, inclusive.
* @hideinitializer */
#define OPUS_SET_PACKET_LOSS_PERC(x) OPUS_SET_PACKET_LOSS_PERC_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured packet loss percentage, @see OPUS_SET_PACKET_LOSS_PERC
+/** Gets the encoder's configured packet loss percentage. @see OPUS_SET_PACKET_LOSS_PERC
*
* @param[out] x <tt>int*</tt>: Loss percentage in the range 0-100, inclusive.
* @hideinitializer */
@@ -340,7 +340,7 @@
* @param[in] x <tt>int</tt>: DTX flag, 0 (disabled) is default
* @hideinitializer */
#define OPUS_SET_DTX(x) OPUS_SET_DTX_REQUEST, __opus_check_int(x)
-/** Gets encoder's configured use of discontinuous transmission, @see OPUS_SET_DTX
+/** Gets encoder's configured use of discontinuous transmission. @see OPUS_SET_DTX
*
* @param[out] x <tt>int*</tt>: DTX flag
* @hideinitializer */
@@ -410,7 +410,7 @@
* @hideinitializer */
#define OPUS_GET_PITCH(x) OPUS_GET_PITCH_REQUEST, __opus_check_int_ptr(x)
-/** Gets the encoder's configured bandpass or the decoder's last bandpass, @see OPUS_SET_BANDWIDTH
+/** Gets the encoder's configured bandpass or the decoder's last bandpass. @see OPUS_SET_BANDWIDTH
* @param[out] x <tt>int*</tt>: Bandwidth value
* @hideinitializer */
#define OPUS_GET_BANDWIDTH(x) OPUS_GET_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)