shithub: opus

--- a/README

+++ b/README

@@ -41,5 +41,5 @@

 -dtx                 : enable SILK DTX

 -loss <perc>         : simulate packet loss, in percent (0-100); default: 0

-input and output are little endian signed 16-bit PCM files or opus bitstreams

-with simple opus_demo propritary framing.

+input and output are little-endian signed 16-bit PCM files or opus bitstreams

+with simple opus_demo proprietary framing.

--- a/doc/draft-ietf-codec-opus.xml

+++ b/doc/draft-ietf-codec-opus.xml

@@ -4823,7 +4823,7 @@

 The CELT layer of Opus is based on the Modified Discrete Cosine Transform

 <xref target='MDCT'/> with partially overlapping windows of 5 to 22.5 ms.

 The main principle behind CELT is that the MDCT spectrum is divided into

-bands that (roughly) follow the Bark scale, i.e. the scale of the ear's

+bands that (roughly) follow the Bark scale, i.e., the scale of the ear's

 critical bands. The normal CELT layer uses 21 of those bands, though Opus

  Custom (see <xref target="opus-custom"/>) may use a different number of bands.

 A band can contain as little as one MDCT bin per channel, and as many as 176

@@ -4876,7 +4876,7 @@

 </list>

 To improve quality on highly tonal and periodic signals, CELT includes

 a prefilter/postfilter combination. The prefilter on the encoder side

-attenuates the signal's harmonics. The postfilter on the decoder size,

+attenuates the signal's harmonics. The postfilter on the decoder side

 restores the original gain of the harmonics, while shaping the coding noise

 to roughly follow the harmonics. Such noise shaping reduces the perception

 of the noise.

@@ -4885,7 +4885,7 @@

<t>

 When coding a stereo signal, three coding methods are available:

 <list style="symbols">

-<t>mid-side stereo: encodes the mean and the different of the left and right channels,</t>

+<t>mid-side stereo: encodes the mean and the difference of the left and right channels,</t>

 <t>intensity stereo: only encodes the mean of the left and right channels (discards the difference),</t>

 <t>dual stereo: encodes the left and right channels separately.</t>

 </list>

@@ -5123,8 +5123,8 @@

 <t>In stereo mode there are two additional parameters

 potentially coded as part of the allocation procedure: a parameter to allow the

-selective elimination of allocation for the 'side' (i.e. intensity stereo) in jointly coded bands,

-and a flag to deactivate joint coding (i.e. dual stereo). These values are not signaled if

+selective elimination of allocation for the 'side' (i.e., intensity stereo) in jointly coded bands,

+and a flag to deactivate joint coding (i.e., dual stereo). These values are not signaled if

 they would be meaningless in the overall context of the allocation.</t>

 <t>Because every signaled adjustment increases overhead and implementation

@@ -5561,7 +5561,7 @@

<t>

 The anti-collapse feature is designed to avoid the situation where the use of multiple

 short MDCTs causes the energy in one or more of the MDCTs to be zero for

-some bands, causing unpleasent artefacts.

+some bands, causing unpleasant artifacts.

 When the frame has the transient bit set, an anti-collapse bit is decoded.

 When anti-collapse is set, the energy in each small MDCT is prevented

 from collapsing to zero. For each band of each MDCT where a collapse is

@@ -6133,7 +6133,7 @@

 When the encoder is configured for voice over IP applications, the input signal is

 filtered by a high-pass filter to remove the lowest part of the spectrum

 that contains little speech energy and may contain background noise. This is a second order

-Auto Regressive Moving Average (i.e. with poles and zeros) filter with a cut-off frequency around 50&nbsp;Hz.

+Auto Regressive Moving Average (i.e., with poles and zeros) filter with a cut-off frequency around 50&nbsp;Hz.

 In the future, a music detector may also be used to lower the cut-off frequency when the

 input signal is detected to be music rather than speech.

 </t>

@@ -7554,7 +7554,7 @@

 needed (for either complexity or latency reasons). Because Opus Custom is

 optional, streams encoded using Opus Custom cannot be expected to be decodable by all Opus

 implementations. Also, because no in-band mechanism exists for specifying the sampling

-rate and frame size of Opus Custom streams, out-of-band signalling is required.

+rate and frame size of Opus Custom streams, out-of-band signaling is required.

 In Opus Custom operation, only the CELT layer is available, using the opus_custom_* function

 calls in opus_custom.h.

 </t>