ref: 6d96d31d9861c5bb25f7657cd07c4b9ffc95447e
parent: 17432b5e3719db41ddbd85381ce4b02cb52cd0c3
author: Werner Lemberg <[email protected]>
date: Fri Jan 12 05:30:19 EST 2007
* builds/unix/install-sh, builds/unix/mkinstalldirs: Updated from `automake' CVS module from sources.redhat.com.
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2007-01-12 Werner Lemberg <[email protected]>
+
+ * builds/unix/install-sh, builds/unix/mkinstalldirs: Updated from
+ `automake' CVS module from sources.redhat.com.
+
2007-01-11 Werner Lemberg <[email protected]>
* src/type1/t1load.c (is_space): Removed.
--- a/builds/unix/install-sh
+++ b/builds/unix/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2006-04-25.22
+scriptversion=2006-12-25.00
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,52 +39,68 @@
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+nl='
+'
+IFS=" "" $nl"
+
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"+doit=${DOITPROG-}+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
-mvprog="${MVPROG-mv}"-cpprog="${CPPROG-cp}"-chmodprog="${CHMODPROG-chmod}"-chownprog="${CHOWNPROG-chown}"-chgrpprog="${CHGRPPROG-chgrp}"-stripprog="${STRIPPROG-strip}"-rmprog="${RMPROG-rm}"-mkdirprog="${MKDIRPROG-mkdir}"+chgrpprog=${CHGRPPROG-chgrp}+chmodprog=${CHMODPROG-chmod}+chownprog=${CHOWNPROG-chown}+cmpprog=${CMPPROG-cmp}+cpprog=${CPPROG-cp}+mkdirprog=${MKDIRPROG-mkdir}+mvprog=${MVPROG-mv}+rmprog=${RMPROG-rm}+stripprog=${STRIPPROG-strip}-posix_glob=
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
posix_mkdir=
-# Symbolic mode for testing mkdir with directories.
-# It is the same as 755, but also tests that "u+" works.
-test_mode=u=rwx,g=rx,o=rx,u+wx
-
# Desired mode of installed file.
mode=0755
-# Desired mode of newly created intermediate directories.
-# It is empty if not known yet.
-intermediate_mode=
-
+chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
-chgrpcmd=
-stripcmd=
+mvcmd=$mvprog
rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
src=
dst=
dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
no_target_directory=
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
@@ -94,59 +110,55 @@
In the 4th, create DIRECTORIES.
Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
+ --help display this help and exit.
+ --version display version info and exit.
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
- -c) shift
- continue;;
+ -c) ;;
- -d) dir_arg=true
- shift
- continue;;
+ -C) copy_on_change=true;;
+ -d) dir_arg=true;;
+
-g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- shift
- shift
- continue;;
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
+ shift;;
- -s) stripcmd=$stripprog
- shift
- continue;;
+ -s) stripcmd=$stripprog;;
- -t) dstarg=$2
- shift
- shift
- continue;;
+ -t) dst_arg=$2
+ shift;;
- -T) no_target_directory=true
- shift
- continue;;
+ -T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
@@ -158,21 +170,22 @@
*) break;;
esac
+ shift
done
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
- if test -n "$dstarg"; then
+ if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
+ set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
- dstarg=$arg
+ dst_arg=$arg
done
fi
@@ -186,13 +199,38 @@
exit 0
fi
-test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
for src
do
# Protect names starting with `-'.
case $src in
- -*) src=./$src ;;
+ -*) src=./$src;;
esac
if test -n "$dir_arg"; then
@@ -210,15 +248,15 @@
exit 1
fi
- if test -z "$dstarg"; then
+ if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
- dst=$dstarg
+ dst=$dst_arg
# Protect names starting with `-'.
case $dst in
- -*) dst=./$dst ;;
+ -*) dst=./$dst;;
esac
# If destination is a directory, append the input filename; won't work
@@ -225,7 +263,7 @@
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
+ echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
@@ -269,83 +307,131 @@
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- posix_mkdir=false
- if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
- posix_mkdir=true
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
- fi ;;
- esac
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
- if
- $posix_mkdir && {+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
# With -d, create the new directory with the user-specified mode.
- # Otherwise, create it using the same intermediate mode that
- # mkdir -p would use when creating intermediate directories.
- # POSIX says that this mode is "$(umask -S),u+wx", so use that
- # if umask -S works.
-
+ # Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
- mkdir_mode=$mode
+ mkdir_mode=-m$mode
else
- case $intermediate_mode in
- '')
- if umask_S=`(umask -S) 2>/dev/null`; then
- intermediate_mode=$umask_S,u+wx
- else
- intermediate_mode=$test_mode
- fi ;;
- esac
- mkdir_mode=$intermediate_mode
+ mkdir_mode=
fi
- $mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
- }
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
then :
else
- # mkdir does not conform to POSIX, or it failed possibly due to
- # a race condition. Create the directory the slow way, step by
- # step, checking for races as we go.
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) pathcomp=/ ;;
- -*) pathcomp=./ ;;
- *) pathcomp= ;;
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
esac
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
+ eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
- $posix_glob && set -f
+ $posix_glob set -f
set fnord $dstdir
shift
- $posix_glob && set +f
+ $posix_glob set +f
IFS=$oIFS
+ prefixes=
+
for d
do
- test "x$d" = x && continue
+ test -z "$d" && continue
- pathcomp=$pathcomp$d
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # Don't fail if two instances are running concurrently.
- test -d "$pathcomp" || exit 1
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
fi
- pathcomp=$pathcomp/
+ prefix=$prefix/
done
- obsolete_mkdir_used=true
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
fi
fi
@@ -353,7 +439,7 @@
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||- test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
@@ -364,7 +450,7 @@
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
- $doit $cpprog "$src" "$dsttmp" &&
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -372,41 +458,54 @@
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \- && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \- || {- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\- || {- echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- } || exit 1
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
trap '' 0
fi
--- a/builds/unix/mkinstalldirs
+++ b/builds/unix/mkinstalldirs
@@ -1,7 +1,7 @@
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
-scriptversion=2005-06-29.22
+scriptversion=2006-05-11.19
# Original author: Noah Friedman <[email protected]>
# Created: 1993-05-16
@@ -11,6 +11,9 @@
# bugs to <[email protected]> or send patches to
# <[email protected]>.
+nl='
+'
+IFS=" "" $nl"
errstatus=0
dirmode=